MAMETesters Bugs Fixed
- 05003: [Graphics] (gb.c) gbcolor [commandk, dkongc, zeldaldx]:
Graphics corruption in many sets (s.ronco)
- 04981: [Graphics] (coleco.c) coleco: [frogger] Blinking graphic
glitches across top half of screen (hap)

New System Drivers Supported:

Systems Promoted from GAME_NOT_WORKING:

Skeleton drivers:
- AlphaSmart Pro [JCCyC]

System Driver Changes:
-mz2000: added and hooked up software lists for tapes and
floppies. tapes do not work, and we need proper dumps of the cassette
BASIC. [Fabio Priuli]

-vip: Fixed VP-700 Tiny BASIC ROM mapping and VP-620 ASCII
keyboard. [Curt Coder]

-i8550021: Added keyboard ROM. [John Elliott]

-hr16: Added preliminary sound emulation. [Sandro Ronco]

-vboy: Improved framebuffer busy / drawing flags for Virtual Boy, golf
doesn´t crash anymore and nesterfb does a bit more [Angelo Salese]

-vboy: correct timer handling, gives proper sound/music. [R. Belmont]

-VK100 IO mirroring, also a lot of prom tracing and comment
updates [Lord Nightmare]

-c64: Added floating bus read support to cartridge interface. [Curt Coder]

-plus4: Added floating bus read support to TED and
cartridge interface. Implemented some Diag264 test cartridge loopback
connectors. [Curt Coder]

-c64: Fixed CPU port, tsuit215 CPUPORT test passes now. [Curt Coder]

-VK100: Correctly hooked up vsync interrupt to crtc instead of
video subsystem; Figured out the low two bits of SYSTAT_A from tracing
and hooked both up, and updated the SYSTAT_A documentation comments.
Additional documentation comments for the SMC COM5016T baud rate
divider. Made the DU/DVM/DIR/WOPS 8*4bit register file an actual
4-entry array, to simplify address decoding later. [Lord Nightmare]

-VK100: simplification of the code by emulating the register
file as an array. [Lord Nightmare]

-apple2gs: Improved Ensoniq sound emulation for many games/apps. [R. Belmont]

-apple2gs: Save states now officially supported. [R. Belmont]

Software Lists:
-vic1001_cart.xml: Added a few more carts. [K1W1]

-ibm5170.xml: Added some more disks. [Kaylee]

-pcw.xml: Dumped UK and FR system disks. [breiztiger]

-mz700: added a software list to document tape dumps [FatArnold]

-channelf.xml: added a bunch of proto carts dumped a few years
ago. [K1W1]

* Huge prototype update, tons of invaluable documentation added
[ReadOnly] Many thanks to all the contributors, in no particular
order: TheRedEye, Adam K, Van Halen, Mike, JackHead, badinsults,
* New dumps deluge
[JachHead, Mike, Yakushi~Kabuto, badinsults, RedScorpion]
* Many new carts profiles added, thanks to RedScorpion’s donation
* Rationalization of the undumped list [ReadOnly]
* Plethora of fixes and additions [ReadOnly]

-pico.xml: new US dumps. [TeamEurope]

Source Changes:
-Fixed vertical sprite wrap-around in SNES driver [Angelo Salese]

-Rewritten cycle steal code from scratch and nailed it directly
in the G65816 CPU core [Angelo Salese, byuu]

-Added PET cassette port slot interface to vic20, c64, and
plus4. Implemented 1530/1531 datassette as slot devices. Converted
MOS6581 interface to devcb. [Curt Coder]

-vic20: Added floating bus read support to VIC and cartridge interface.
[Curt Coder]

-vic10: Added floating bus read support to VIC-II and cartridge interface.
[Curt Coder]

-Fixed incorrect SPC700 IPL ROM behaviour in SNES driver(s),
fixes some (not all) crashes at soft reset [Angelo Salese]

-Added Sound Blaster 16, and proper 16 bit ISA DMA handling [Carl]

-Added IBM VGA card [Carl]

-m6502: Fixed CPU peripheral port behavior by introducing pull-up and
pull-down masks to the CPU interface. [Curt Coder]

-isa_blaster: Adds 2,3 and 4bit ADPCM support [Carl]

-Preliminary support for cassette images in MZ-2000
[Angelo Salese]

-Added keyboard inputs for Pasopia and Pasopia 7, z80pio irq
still doesn´t work [Angelo Salese]

-Added paddles and light pen VCS control devices. [Curt Coder]

-support for writing to compressed hard drives using diff files. [smf]

-pc hardware: cleanup the end-of-dma notifications [O. Galibert]

-isa_blaster: improves the adpcm and simplifies the dsp
protection, based on the ATI Stereo FX rom. [Carl]

-pc_joy: made pc joystick a device for the many isa audio adapters with
joy ports to share. [Carl]

-cbmb: Added PLA dumps. [Edward Shockley]

-ATI Stereo F/X ISA card support [Carl]


MAMETesters Bugs Fixed

New System Drivers Supported:

Systems Promoted from GAME_NOT_WORKING:
- SBC6510 [Robbbert]

Skeleton drivers:
- VAX 785 (LSI-11 board only) [Miodrag Milanovic]

- Elektronika MS-0515 [KokaF77, Miodrag Milanovic]

System Driver Changes:

-llc1: fixed monitor keyboard LLC2: added speaker and annoying keyclick

-vidbrain: Added expansion port interface. [Curt Coder]

-vidbrain: Added expansion port pinout. (nw)

-llc: modernised ; LLC2 added support for reverse video & added missing
pio. [Robbbert]

-vk100: Some improvement to the HLE vector generator, now properly
emulates the down counter so the "blue screen" part of the POST looks
correct, as does the cursor width. [Lord Nightmare]

-vk100: broke the vram access logic/math out of the vector generator
callback and into its own functions; fixed? the systat_a register to
read the vram nybble the x and y regs are currently pointing to.
[Lord Nightmare]

-abc800c: Added character display, promoted driver to working.
[Curt Coder]

-pcm: connected the k7659 keyboard, fixed screen size [Robbbert]

-abc800c: Added high resolution graphics. [Curt Coder]

-abc80: Added serial interface. [Curt Coder]

-a6809: Added ASCII keyboard. [Curt Coder]

-abc806: Used correct HRUII PROM. [Curt Coder]

-socrates: document that an MCU dump is missing of the 4-bit TMP42C40P
that decodes the IR signal from the keyboard and buffers the ´second
stage´ of the keyboard input. Changed code slightly to reflect this.
[Lord Nightmare, Balrog]

-z9001 : added 2xpio, ctc, daisy-chain, beeper-sound, cassout

-v6809 : various video improvements. [Robbbert]

-abc80: Refactored legacy code, moved DOS ROMs to ABC bus DOS card,
added BASIC V1 dump, added ABC 890 bus expander device. [Curt Coder]

-abc80x: Refactored legacy code, cleaned up keyboard interface, added
ABC894 bus expander device, added ABC 55 keyboard for ABC 802.
[Curt Coder]

-vt100: add the GPO (aka VT125 mono board) roms and proms as a mix of
NO_DUMP and copies of the vk100 ones where identical [Lord Nightmare]

-vk100: further comment updates, got rid of LASTVRAM in favor of doing
a single read at the current nybble pointed to by the X and Y
registers. [Lord Nightmare]

-vk100: Implemented baud generator LUT for i8251, not hooked up yet;
added RTS callback which doesn´t seem to work yet. [Lord Nightmare]

-vk100: Doing further vector rom tracing with a meter on the board
using the vt125 schematics as a guide, figured out what all the vector
rom pins do (except perhaps D LOAD). [Lord Nightmare]

-vip: Added VP-620 ASCII keyboard cable, VP-570 RAM expansion board,
and VP-575 bus expander board. [Curt Coder]

-plus4: Rewrite of the C16/Plus+4 driver with improved memory mapping
and cartridge support. Refactored the Commodore 1551 floppy drive to
connect to the expansion port. [Curt Coder]

-vk100: Documented all the inputs and enables of the RAS/ERASE prom
through tracing. Documented that the MSB bit of the SYNC prom is ...
SYNC. The VT125 Schematics were invaluable for this.
[Lord Nightmare, Al Kossow]

-sbc6510: Connected up the keyboard and added ay-3-8910 chip [Robbbert]

-vii: Fixing some warnings. Not 100% sure of the intended
functionality, but IRQ & IRQ_MASK & line seems probable and seems to
work. [MooglyGuy]

-c64: Fixed C1541 and FSD-2, added Dolphin DOS 2.0 and
Professional-DOS V1 hardware. [Curt Coder]

-plus4: Added SID card emulation. [Curt Coder]

-c64: Emulated the digital read circuitry of the Commodore 1541 disk
drive according to the long board schematics. This will allow
independent setting of the bitrate of incoming data and the sample
rate. Passing more advanced copy protections require a cycle exact
rewrite of the 6502 and VIA, but this is the first step toward proper
emulation. [Curt Coder]

-vip: Added VP-700 Tiny BASIC board. [ekeefe, Curt Coder]

-c64: Added support for per-byte speed zones in G64 images.
[Curt Coder]

-sacstate: Added comments. Fixed input ports. [Robbbert]

-hr16: Hooked up LCD controller and added keypad inputs. [Sandro Ronco]

* Get closer to LK201 emulation [R. Belmont, Lord Nightmare, Balrog]
* Add documentation for system error codes and diagnostic LEDs

-vboy: various driver improvements [Angelo Salese]

-vboy: preliminary audio hookup [Richard Bannister, Gil Pedersen, R. Belmont]

-x1: added support for old TAP format to the driver, so that all newly
added tapes work (high sample rate tapes are still not supported, though)
[Fabio Priuli]

Software Lists:
-pico.xml: added new Jpn dumps [TeamEurope]

-pico.xml: started documenting PCBs and ROM labels [TeamEurope]

-x1_flop: first round of new dumps [Starscreamer the 2nd]

-x1_cass: some more new dumps [Starscreamer the 2nd]

Source Changes:
-new device k7659 keyboard; modified LLC2 to work with it [Robbbert]

-k7659kb - added more keys, added port_char, added return value when no
key pressed [Robbbert]

-terminal: Replaced internal keyboard with the Ascii keyboard, since
they were identical. [Robbbert]

-nscsi: documentation [O. Galibert]

-rp5c15: Initialize at power-on (makes the x68k boot reliable) [O. Galibert]

-roc10935/7: correct an error in the lookup table for the ´7´ character [Lord Nightmare]


MAMETesters Bugs Fixed

New System Drivers Supported:

Systems Promoted from GAME_NOT_WORKING:

Skeleton drivers:

System Driver Changes:
-vt100: Fix vt100 to use beep instead of speaker. Some work still needs to be
done to beep.c since the phase needs to be reset in such a way that
keyclicks work consistently, in addition to beeps. [Lord Nightmare]

-vt100: Added missing dot stretching to the DEC VT100´s dc012 emulation. See
EK-VT100-TM-003 page 4-76 for a description. Note the stretching takes
place after the character rom but before invert or other attributes.
[Lord Nightmare]

-vk100: hook up vblank interrupt (critical selftest now passes); add
layout for LEDS, beginning of skeleton keyboard support.
[Lord Nightmare]

-exelvision: use correct vsm rom [robcfg, kevtris]

-vk100: Correct the labels of several proms which were unreadable on the vk100
that they were dumped from [nigwil]

-vk100: attach keyboard [Lord Nightmare]

-vk100: miscellaneous progress, slight cleanup to keyboard, stubbed and
implemented a bunch of vector generator addresses [Lord Nightmare]

-vk100: figured out pattern rom addressing [Lord Nightmare]

-vk100: implemented stubs for the rest of the VG registers
[Lord Nightmare]

-vk100: implemented or stubbed the rest of the io registers, left
SYSTAT_A commented for now since its behavior is unclear. Added and
attached the dipswitches to SYSTAT_B (though this may well be wrong)
Hooked up the i8251 uart preliminarily (ints not hooked up yet)
[Lord Nightmare]

-mc1502: added cassette input, keyboard input fix. [shattered]

-iskr1031, ec1841: split machine descriptions from pc16, remove hacks
from pc16 and ibm5550. [shattered]

-ec1841: mirror chargen memory at b800:1000 -- fixes video test 501 on
TPS (diagnostics) disk. [shattered]

-ec1841: implement memory controller (only for 1 board yet), no support
for remapping banks inside the board. Memory test in POST passes.

-vk100: WIP: preliminary gfx rendering; hooked up the i8251 interrupts.
Corrected dipswitch locations. [Lord Nightmare]

-vk100: Initial implementation of the vector generator. Rather buggy, and not
really readable yet, but it definitely shows something on screen, and
you can type and see things change! (and you see a blinking cursor
too!) [Lord Nightmare]

-vk100: further improvements to the vector generator, still not
completely correct. [Lord Nightmare]

-vk100: FINALLY fixed the vector generator. Display looks relatively
sane now. Fixed shift and capslock being reversed and added
port_toggle to capslock. [Lord Nightmare]

-vk100: preliminary direction support for basic vectors. doesn´t quite
work right yet. [Lord Nightmare]

-vk100: Add more debugging defines, remove some unneeded code, and
added more comments to TODO and to some registers. [Lord Nightmare]

-vk100: vector generator uses "real" timing instead of drawing the
vector instantly. [Lord Nightmare]

-vk100: update comments to reflect that the pr1 prom is clearly the
VECTOR ROM. Add notes about what each address bit does or is thought
to do. (the tech manual documentation is lousy, but is better than
nothing). [Lord Nightmare]

-geniusiq: Added PCB layout for the German Version. [TeamEurope]

-vk100: minor cleanups to variable names, documented as much of the
address info of the sync and direction proms as I could figure so far.
[Lord Nightmare]

-vk100: vector timing callback rate is now definitely correct; the tech
manual had an annoying error which made this hard to figure out.
[Lord Nightmare]

-vk100: figured out bits 3,2,1 of SOPS register and implemented
blinking and documented serial multiplexer based on these findings.
Also fixed a stupid bug in the display code which broke the reverse
video bit. [Lord Nightmare]

-vk100: properly hooked up dipswitches through the SYSTAT_A register
bit d2. Got rid of some dead palette code. [Lord Nightmare]

-vk100: Fixed the weird ordering of the dipswitches, so everything now
controls what it should. [Lord Nightmare]

-vk100: Add the two previously-missing PROMs (not hooked up yet);
Update notes a bit, correct location for the main roms according to
tech manual (it turns out you count from the lower right corner
upward, not upper right downward). [Lord Nightmare, Balrog, Andy V.]

-vk100: Comment wrangling and some analysis of the newly dumped proms.
Still some work to be done here especially on the vector prom.
[Lord Nightmare]

-vidbrain: Fixed graphics corruption in Lemonade Stand. [Sean Riddle]

-vidbrain: Fixed memory map, improved colors. [Sean Riddle]

-mc1502: preliminary floppy support. Still not functional [shattered]

-pc: fixes the sound in Arkanoid, which doesn´t use the 8253 at all.

-llc1: [Robbbert]
* Identified monitor keys
* Turns out new monitor rom is also a bad dump
* Added patches to make the system usable

-vk100: more comment updates based on shared info from VT125 tech
manual [Lord Nightmare]

-vk100: slight documentation updates, traced sync rom A4 completely.
[Lord Nightmare]

Software Lists:
-pico.xml: added more Japanese dumps [TeamEurope]

-a800.xml: Another small addition to the a800 softlist. [K1W1]

-apple1.xml: Added proper wav for aslite [Anon]

Source Changes:
-m68k: Handle higher-value constants in FMOVECR [R. Belmont]

-Moved TMS9901/9902 from mess/machine to emu/machine [Michael Zapf]

-AM9517 DMA controller enhancements, adapted PC drivers to use it

-pccga: ec1841 not only mirrors the chargen buffer, but also
byte-swaps it [shattered]


MAMETesters Bugs Fixed
- 04926: [Speed] (pce.c) tg16, pce: Slowdown when playing CD based games (Angelo Salese)

New System Drivers Supported:

Systems Promoted from GAME_NOT_WORKING:

Skeleton drivers:

System Driver Changes:
-dmv: Added keyboard mcu rom content [rfka01]

-intellivision: update comments and fix rom locations on intv1
hardware. Note the intv1 exec.bin still needs to be split to the two
separate roms that the real hardware used. [Lord Nightmare]

-intellivision: enabled the c000-cfff area for cart rom access; while
no commercial carts used this afaik, at least one homebrew cart does
and won´t work without it. (actually this was in the previous commit
by accident) Corrected the manufacturer/name of the Sears Super Video
Arcade. [Lord Nightmare]

-thomson: Performance improvements and bug-fixes: more efficient bank
switching, fixed video update (Mach 3, Sparce Racer, HCL), fixed game
PIA port B, fixed side-effect in debugger, fixed MO6 cassette.
[Fabrice Bellet]

-vidbrain: Improved video timings and correct CPU clock.
[Kurt Woloch, Sean Riddle, Curt Coder]

-ep804/digel804: a lot of documentation updates, fixed location of roms
to match schematics; documented the ram expansion pinout.
[Lord Nightmare, balrog]

-sc3000: Added support for the SC-3000 Survivors *.bit cassette file
format. [Curt Coder, SC-3000 Survivor]

-vip: Added byte I/O and expansion slot interfaces. [Curt Coder]

-sc3000: Moved the fake BIOS to cartridge software list. SC-3000 does
not have an internal BIOS, instead a BASIC or other cartridge needs to
be plugged in manually. E.g. "mess sc3000 basic3" [Curt Coder]

-vip: Connected the byte I/O and expansion ports. Refactored the
VP550, VP590, and VP595 to implement the expansion slot interface.
[Curt Coder]

-vip: Added beeper on/off switch, and VP585 board. [Curt Coder]

-ti99: gromport redesigned, now offering three slot options "single"
(default) / "multi" / "gkracker" determining the set of cartridge
slots (cart or cart1/2/3/4). Cartridge insertion may be set to trigger
RESET or not. TI consoles now have a dedicated RESET line, connected
to the RESET input of the CPU and VDP. [Michael Zapf]

-DEC VK100/GIGI documentation update; document two missing proms,
correct (I hope) IC locations (until we can get schematics) using the
DEC system of counting from the top right corner downward and shifting
one column to the left at the end, and documented the (sometimes
barely/illegible) markings on the proms.
[Lord Nightmare, Andy Valencia, Guru]

Software Lists:
-ibm5150.xml: Added cassette software list. [Curt Coder]

-snes.xml: Added a dump of a prototype of the cancelled title, Spectrum
HoloByte’s Falcon [Le GROS Pixel]

-ql.xml: Added software list for Microdrive cassettes. [Curt Coder]

-tandy6k.xml: Added software list for floppies. [Curt Coder]

-tandy2k.xml: Added software list for floppies. [Curt Coder]

-bw12.xml: Added software list for floppies. [Curt Coder]

-wmbullet.xml: Added software list for floppies. [Curt Coder]

-vip.xml: Added software list for cassettes. [Curt Coder]

-compis.xml: Added software list for cassettes. [Curt Coder]

-pico.xml: new spanish and japanese dumps [TeamEurope]

-ibm5150.xml: added a few diagnostic disks and moved here a couple of
disks from ibm5170.xml, since they belong here
[Kaylee, shattered, rfka01]

-ibm5170.xml: Added a few more disk images (and reorganized the list)

Source Changes:
-Refactored the Commodore disk drives to use BIOS definitions.
[Curt Coder]

-tms9928/v9938: Using an own address space for the attached video
memory [Michael Zapf]

-tms99xx: Introduced symbolic constants for interrupt lines. Added a
special RESET line which is handled by the CPU, not by the emulator
core. tms9928a/v9938: Introduced dedicated RESET line. [Michael Zapf]


MAMETesters Bugs Fixed
- 04888: [Documentation] (msx.c) cpc400, cpc400s: The year of
manufacture should be corrected to 1988. (Wilbert Pol)

New System Drivers Supported:

Systems Promoted from GAME_NOT_WORKING:
- Homelab3 [Robbbert]
- Homelab4 [Robbbert]

Skeleton drivers:
- Brailab Plus [Robbbert]

System Driver Changes:
-vic20/c64: Added a slot interface for the control ports. [Curt Coder]

-ti99/tm990189: TM990/189 now using the new TMS9980A implementation;
small mods in TI-99 systems. [Michael Zapf]

-Added a slot interface for the Atari 2600 controller ports, and a
digital joystick device to accompany it. [Curt Coder]

-Ensoniq Mirage: Preliminary hookup of floppy format and WD1772 FDC
[R. Belmont]

-Ensoniq: various documentation improvements for the 16-bit Ensoniqs
including correct CPU speed and other details.
[R. Belmont, Christian Brunschen]

-odyssey2: Fixed noise channel. [Justin Kerk, Kevtris]

-Various improvements of mc1502 driver [shattered]

-brailab4: screen and speech. [Robbbert]

-floppy improvements of mc1502 driver [shattered]

-fix for mikrosha cassette output [shattered]

-ec65 - added ascii keyboard [Robbbert]

-ti99: Joystick port now a dedicated slot device [Michael Zapf]

-ti99/990189: Added LOAD interrupt switch [Michael Zapf]

-mac: fix harddisks to work again [R. Belmont]

-geniusiq: Added German ROM. [PulkoMandy]

Software Lists:
-pico.xml: new US dumps added. [Team Europe]

-bbc*_cass.xml: added software lists for tapes and hooked them up
to BBC Model A, B and BBC Master drivers. [Pernod]

-pv1000.xml: two new dumps added [anondumper]

-sf7000.xml: Added floppy software list. [Curt Coder]

-bbcm_cart.xml,electron_cart.xml: added cart list for BBC Master
and Acorn Electron, not hooked up yet. [Pernod]

Source Changes:
-Re-implementation of TMS9980A for cycle-precise processing; changed
tms9900.c to allow subclassing TMS9900 and TMS9980A from a common
parent. [Michael Zapf]


MAMETesters Bugs Fixed
- 04885: [Documentation] (chesstrv.c) borisdpl: The correct
year of manufacture is 1979.
- 04880: [Documentation] (chesstrv.c) chesstrv: The correct
year of manufacture is 1980.

New System Drivers Supported:

Systems Promoted from GAME_NOT_WORKING:

Skeleton drivers:
- Unknown HP Z80-based mainframe. [Robbbert,Lord Nightmare]
- VTech Genius PC. [PulkoMandy]
- ITT3030 [rfka01]

System Driver Changes:
-tvc: Added .cas cassette image support. [Sandro Ronco]

-apple II: Added the S.A.M. speech card. Literally an 8-bit DAC and
speaker and that´s it. [R. Belmont]

-apple II: Add ALF Apple Music II card (3x SN76489s) [R. Belmont]

-m20: Now passes POST, need to get FDC booting next [Christian

-pcw8256: added software list for disk images and hooked up to the
driver. [Fabio Priuli]

-c64: Added a 16KB EPROM cartridge, to which you can map your own ROMs
either to ROML, ROMH, or both. E.g. "mess c64p -exp 16k -cart2
roml.bin -cart3 romh.bin". The cartridge can operate in 8KB/16KB or
Ultimax mode. [Curt Coder]

-elektor: added support for pgm quickloads. Added notes on how to use
quickloads on vc4000 etc. [Robbbert]

-nes.c: fixed emulation of mapper 52 variant with switched CHR bank
lines, used by several pirate multigame carts [Fabio Priuli]

-nes.c: added support for the MMC3 variant used by Fight Street VI
[Fabio Priuli]

-nes.c: added support for UNL-FS304 board used by A Link to the Past
(Waixing) [Fabio Priuli]

-nes.c: added support for a bootleg board by YOKO Soft used by a couple
of fighting games. [Fabio Priuli]

-nes.c: fixed emulation of DAOU306 pcb needed by Janggun ui Adeul.
[Fabio Priuli]

-Added "Mac 512" bootleg by Unitron Brazil [rbanffy]

-dm7000: connected terminal keyboard [Lukasz Markowski]

-Lots of Ensoniq work: [R. Belmont, Christian Brunschen]
* Added SQ-80, VFX-SD, SD-1, and SD-1 32 voice.
* Added ubiqitous 2x40 line VFD display
* Hooked up floppy drive and controller on VFX-SD, SD-1, SD-1 32, and
* Fixed battery level readback on all 16-bit Ensoniqs and respond
correctly to keyboard calibration command

-m20: More floppy drive hookup. A trivial booter disk works; the OS
does not. [Christian Grössler]

-ensoniq: EPS-16 ROMs turned out to be plain EPS. [R. Belmont]

-vidbrain: Improved sound slightly. [Kurt Woloch]

-ensoniq: add floppy side select control and EPS/EPS-16+´s 68450 DMAC.
EPS OS now boots and says "ERROR 129" instead of crashing. [R.

-apple II: Make Brazilian quasi-clone TK2000 show something.
[R. Belmont]

-apple II: Laser 128 and 128EX partially working, can boot ProDOS, DOS
3.3 dies. [R. Belmont]

-megadriv.c: confirmed Asia MegaCD dump [Jakovasaur, ElBarto]

-apple II: Preliminary support for German "Space 84" clone
[R. Belmont, rfka01]

-wangpc: Driver now boots from floppy. [Curt Coder]

-apple II: Clean up Laser 128 support, support Space 84 h-flipped char
roms. [R. Belmont]

-wangpc: Emulated the medium resolution video controller. [Curt Coder]

-eacc: fixed nmi operation. System boots. [Robbbert]

-apple II: Add the Street Electronics Echo II speech card [R. Belmont]

-apple II: Add support for IBS AP16 VideoTerm clone [R. Belmont,

-apple II: Support an alternate version of the AP-16 card
[R. Belmont, rfka01]

-apple II: fix crash on hard reset/multisession and improved IIgs soft
reset behavior. [R. Belmont]

-eacc: fixed remaining bugs [Robbbert]

-apple II: Add two more VideoTerm clones of unknown manufacture
[R. Belmont, Lord Nightmare]

Software Lists:
-vsmile.xml: added some new dumps [rimsky82]

-pico.xml: new Japanese dumps [Team Europe]

-pico.xml: added info about Japanese releases and list of undumped items [Fabio Priuli]

-apple1.xml: added a few more tapes [Anon01]

-megadriv.xml: documented more carts and dumps. [ElBarto]

-snes.xml: documented the copy protection algorithm of many pirate
cartridges [d4s]

-snes.xml: a couple of new dumps [Badablek, d4s]

-megadriv.xml: added a few Russian pirate dumps. [Kaylee]

-ibm5150.xml: Updated the IBM 5150 list with a few more dumps, and
fixed a few errors. [Kaylee]

-pico.xml: new US dumps added. [TeamEurope]

Source Changes:
-upd765.c: Trigger RDY active during reset interrupt for each drive
independently so that 4 consecutive Sense Interrupt commands will
return the correct status. [Curt Coder]

-SoundBlaster: first-pass somewhat naive working version. Autoinit DMA
does not work; use sblaster1_0, not 1_5! [R. Belmont]

-New TMS9900 and TMS9995 implementation with proper control line
handling and wait state generation. Previous implementation has been
renamed and drivers point to the old implementation until they are
adapted to the new one. [Michael Zapf] [/CODE]

Télécharger MAME(MESS) [x86] v0.179 (24.0 Mo)

Télécharger MAME(MESS) [x64] v0.179 (24.6 Mo)

Site Officiel

En savoir plus...