[02/03/97]

Destination Earth (conversion for Space Invaders Part 2, the colour one)

All EPROMS are 2716
G & H wouldn't verify at 4.7V but read consistently at 5.0V

There are piles of jumpers on this board. With the board face up, edge 
connector to the left, the settings were:-

S9  LEFT OF TWO
S5  BOTTOM OF THREE
S6  BOTTOM OF THREE
S7  LINKED TO S8 MIDDLE OF THREE
S8  BOTTOM OF THREE
S10 TOP OF TWO
S11 TOP OF TWO
S1  MIDDLE OF THREE
S2  LINKED TO S3 LEFT OF TWO
S3  LINKED TO S2 MIDDLE OF THREE

UNLABLED JUMPERS BETWEEN TTL AND EPROMS
32 TOP TO BOTTOM OF THREE
33 (right) MIDDLE TO BOTTOM OF THREE
33 (left) not connected.
34 (right) MIDDLE TO BOTTOM OF THREE
34 (left) not connected.
35 (right) TOP TO BOTTOM OF THREE
35 (left) TOP TO BOTTOM OF THREE

EPROM JUMPERS
31 BOTTOM LEFT TO TOP RIGHT
32 BOTTOM LEFT TO BOTTOM RIGHT
33 BOTTOM LEFT TO BOTTOM RIGHT
34 TOP LEFT TO BOTTOM RIGHT
35 TOP LEFT TO BOTTOM RIGHT
36 (lower) TOP LEFT TO BOTTOM RIGHT
36 (upper) BOTTOM LEFT TO BOTTOM RIGHT
42 (upper left) BOTTOM LEFT TO BOTTOM RIGHT OF THREE
42 (upper right) BOTTOM LEFT TO BOTTOM RIGHT of FOUR
42 (lower) TOP LEFT TO BOTTOM RIGHT

-


[01/04/97]

Lunar Rescue[TAITO] JAPAN

ROM Type:2708(+5V,+12V,-5V)

LUNARRSC 0         1,024 92-10-04   14:46	00000H~
LUNARRSC 1         1,024 92-10-04   14:46	00400H~
LUNARRSC 2         1,024 92-10-04   14:46	00800H~
LUNARRSC 3         1,024 92-10-04   14:46	00C00H~
LUNARRSC 4         1,024 92-10-04   14:46	01000H~
LUNARRSC 5         1,024 92-10-04   14:53	01400H~
LUNARRSC 6         1,024 92-10-04   14:47	01800H~
LUNARRSC 7         1,024 92-10-04   14:47	01C00H~
LUNARRSC 8         1,024 92-10-04   14:47	04000H~
LUNARRSC 9         1,024 92-10-04   14:47	04400H~
LUNARRSC A         1,024 92-10-04   14:47	04800H~
LUNARRSC B         1,024 92-10-04   14:47	04C00H~

This ROM work at "SPACE INVADERS" PCB.(3 Board Type)



*How to play

 You are operator of Rescue-ship.
 1st.
 -Push button and left or right to control ship.
 -and Landing Safety.
 -while button ship is back-fire(Caution LEFT-FUEL)

 2nd.
 -Push button and left or right to control ship.
 -and Docking Mother-ship.
 -button shoot bulett attack UFO.
 -while button ship go fast.

 GOOD LUCK !!



 1997/01/04

-



[Jul/13/98]

        LUNAR RESCUE      TAITO

THE PROMS ARE 2716, NUMBERED SEQUENTIALLY ACROSS THE BOARD

WITH RE-26 ON THE CRYSTAL SIDE.

7643-1.CPU IS LOCATED ON THE CPU BD

GAME USES AN 8080 CPU

-

[Apr/11/2006]

Lunar Rescue (Taito)  
Anno 1979  
Produttore Taito  

Note Samples recorded by Corrado Tomaselli.
Sound editing by Twisty.  

Funzionamento Non testata  
In vendita No  

Dumped 18/03/2006 

-

[Jul/01/2005]

Lunar Rescue (different hardware)  
Sidam

N.revisione 10134a-10133a  

CPU
1x 8080 (main)
1x oscillator no marks
1x dipswitch 8 switches  

ROMs
1x TMS2516 (0)
6x MK2716 (1-2-3-4-5-6)  

Note Layout is very very similar to other Sidam games.

It's a clone of "Lunar Rescue"

ATTENTION: ROMS N 4 AND 6 ARE PROBABLY BAD DUMPS!!  

Funzionamento Non testata  
In vendita No  

Dumped 30/06/2005 

-

[Jul/20/2006]

Lunar Rescue (on Sidam hardware)  
Sidam 1979  

CPU
1x INS8080AD
1x oscillator 19968  

ROMs
7x TMS2516JDL  

Note
1x 22x2 edge connector
1x 8 switches dip
1x trimmer (volume)  

Funzionamento Non testata  
In vendita Si  

Dumped 19/07/2006 

-




