[Nov/24/2002]

Police Trainer (c) 1996 P & P Marketing

PCB Labelled as "ATTILA VIDEO SYSTEM"

Chips:
  CPU: IDT 79R3041-25J (MIPS R3000 core)
Sound: BSMT2000

Other:
  XILINX XCS??? (x2)
  Bt481AKPJ110 (44 Pin PQFP, Brooktree RAMDAC)
  AJ001 (160 Pin PQFP, P & P Marketing Custom)

EEPROM: ATMEL 93C66

OSC: 
 48.000Mhz

DIP: One 8-position

Program - Roms are ST 27C1001

pt-U110.bin       
pt-U111.bin        
pt-U112.bin       
pt-u113.bin


Graphics - Roms are ST M27C801

pt-u120.bin - Labelled as "U120 1:2"
pt-u121.bin - Labelled as "U121 1:1"
pt-u124.bin - Labelled as "U124 2:2"
pt-u125.bin - Labelled as "U125 2:1"

Sound Samples - Roms are ST M27C801

pt-u160.bin - Labelled as "U160 1:1"
pt-u162.bin - Labelled as "U162 2:1"


DIP Switch (8 Position DIP)
------------------------------------------------------------------
    DipSwitch Title   | Function | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
------------------------------------------------------------------
         Unused                  |off|off|off|off|off|off|       |
------------------------------------------------------------------
     SYNC Polarity    |   ????   |                       |off|   |
                      |   ????   |                       |on |   |
------------------------------------------------------------------
     Vertical Flip    |  Normal  |                           |off|
                      |  Flipped |                           |on |
------------------------------------------------------------------


                       Police Trainer JAMMA Pinout

                          Main Jamma Connector
            Solder Side            |             Parts Side
------------------------------------------------------------------
             GND             | A | 1 |             GND
             GND             | B | 2 |             GND
             +5              | C | 3 |             +5
             +5              | D | 4 |             +5
                             | E | 5 |
             +12             | F | 6 |             +12
------------ KEY ------------| H | 7 |------------ KEY -----------
                             | J | 8 |      Coin Counter # 1
                             | K | 9 |
        L Speaker (-)        | L | 10|        L Speaker (+)
        R Speaker (-)        | M | 11|        R Speaker (+)
        Video Green          | N | 12|        Video Red
        Video Sync           | P | 13|        Video Blue
                             | R | 14|        Video GND
                             | S | 15|         Test Switch
        Coin Switch 2        | T | 16|         Coin Switch 1
       Start Player 2        | U | 17|        Start Player 1 
                             | V | 18|
                             | W | 19|
                             | X | 20|
                             | Y | 21|
                             | Z | 22|
                             | a | 23|
                             | b | 24|
                             | c | 25|
                             | d | 26|
             GND             | e | 27|             GND
             GND             | f | 28|             GND


 CN1: Left (Red) Gun Connector Pinout

   1| +5 Volts - RED Wire
   2| Trigger  - White Wire
   3| Ground   - Black Wire
   4| Gun OPTO - Blue Wire

 CN2: Right (Blue) Gun Connector Pinout

   1| +5 Volts - RED Wire
   2| Trigger  - White Wire
   3| Ground   - Black Wire
   4| Gun OPTO - Blue Wire

 CN7: Alternate Speaker Connector

   1| Left   (+)
   2| Left   (-)
   3| Right  (-)
   4| Right  (+)



[May/14/2000]

Police Trainer
P&P Marketing

CPU: There are many unknown custom square chips on this pcb.
I can see one with the following markings
SDT 79R3041 -25J XB9647P

I see another smaller square chip with these markings...
BT481AKPJ110 823 9705

and yet another one
P&P Marketing AJ001 5380-JY3306A

and likely a protection chip with the number BSMT2000
written on it.

OSC: 48Mhz

DIP: 1 x 8-position

Eproms read as type 27C1001

PT-U110.BIN       
PT-U111.BIN        
PT-U112.BIN       
PT-U113.BIN         



Mask Roms unknown type but read as 27C080

PT-U120.BIN
PT-U121.BIN
PT-U124.BIN
PT-U125.BIN
PT-U160.BIN
PT-U162.BIN

-

[MAME]

The ATTILA Video System PCB (by EXIT Entertainment):

Sharpshooter PCB is Rev 0.5B
Police Trainer PCB is Rev 0.3

               JAMMA Connector
GUN1   XILINX-1

GUN2

LED1 LED2                    93C66

                IDT71024 x 2  Bt481
   8-way DIP  AT001

U127                 U113       U162
U125  IDT71256 x 4   U112
U123                 U111       U160
U121                 U110
U126
U124  OSC    IDT79R3041    XILINX-2
U122  48.000MHz                 XILINX-3
U120                             BSMT2000

Chips:
  CPU: IDT 79R3041-25J (MIPS R3000 core)
Sound: BSMT2000
Other: Bt481AKPJ110 (44 Pin PQFP, Brooktree RAMDAC)
       AT001 (160 Pin PQFP, P & P Marketing Custom)
       ATMEL 93C66 (EEPROM)
PLDs:
       XILINX-1 Labeled as U175A (Rev 3: Not Used)
       XILINX-2 Labeled as U109A (Rev 3: Lattice - U109.P)
       XILINX-3 Labeled as U151A (Rev 3: Lattice - U151.P)


Note #1: On a Rev 3 PCB, the XILINX PLDs are replace with Lattice PLDs
Note #2: On a Rev 3 PCB there is a small daughter card to help with gun input
Note #3: Bt481A 256-Word Color Palette 15, 16 & 24-bit Color Power-Down RAMDAC

-

[MAME]


The ATTILA Video System PCB (by EXIT Entertainment):

Sharpshooter PCB is Rev 0.5B
Police Trainer PCB is Rev 0.3

|------------JAMMA Connector------------|
|                     CN7               |
| GUN1   XILINX-1              93C66    |
| GUN2                                  |
|                                       |
| LED1 LED2         IDT71024 x 2  Bt481 |
|             AT001                     |
|  DSW(8)                               |
|U127                       U113    U162|
|U125  IDT71256 x 4         U112        |
|U123                       U111    U160|
|U121                       U110        |
|U126                                   |
|U124  OSC    IDT79R3041  XILINX-2      |
|U122  48.000MHz             XILINX-3   |
|U120                          BSMT2000 |
|---------------------------------------|

Chips:
  CPU: IDT 79R3041-25J (MIPS R3000 core)
Sound: BSMT2000
Other: Bt481AKPJ110 (44 Pin PQFP, Brooktree RAMDAC)
       AT001 (160 Pin PQFP, P & P Marketing Custom)
       ATMEL 93C66 (EEPROM)
       CN7 - 4 pin connector for stero speaker output
PLDs:
       XILINX-1 Labeled as U175A (Rev 3: Not Used)
       XILINX-2 Labeled as U109A (Rev 3: Lattice - U109.P)
       XILINX-3 Labeled as U151A (Rev 3: Lattice - U151.P)

Note #1: On a Rev 3 PCB, the XILINX PLDs are replace with Lattice PLDs
Note #2: Bt481A 256-Word Color Palette 15, 16 & 24-bit Color Power-Down RAMDAC
Note #3: For Rev 3 PCBs there is an optional daughter card to help with horizontal
         light gun accuracy

-