[Aug/24/97]

Tazzmania

This game is found on atleast 2 similar style boards. These docs will cover the
Stern A969 Rev B motherboard but should work on a L-1200-2B modified to use a Z80 processor.

Jumper wires added to board....

 1)  5A pin 5 to top right 220 ohm resistor at 5E (edge connector side).
 2)  1E pin 15 to 4E pin 8.
 3)  Feedthru hole nearest to 3D pin 5 to 4E pin 10.
 4)  4E pins 9 & 10 soldered together.

The second set of EPROMs 2#K.cpu are from a Konami PCB (KT-4109-2).
Note that the checksums are different and on this board there are no buffer
chips at 1E, 1F.

This board did work but the colors were not correct and I cannot explain
why (jumpers?? as the color chip was present and marked and I assume good).

I personally am more interested in the Stern A969 code as this is a common board.

-