[Sep/16/2005]


   UPPER BOARD

   _________________________________________________________
   |            ___________  ___________  _____      __    |
   | 74LS245P  |U14 Empty | |U12 ROM1  |  |IC1|      |B|   |
   | 74LS245P  |__________| |__________|  |___|            |
   | 74LS245P   ___________  ___________    _____________  |
 __|           |U13 Empty | |U11 ROM2  |   | AT89C51    |  |
 |_ J          |__________| |__________|   |____________|  |_
 |_ A           ______________________              _____  |_ J
 |_ M          | U10 MC68000P10       |             |OSC|  |_ P
 |_ M          | Motorola             |                    |_ 2
 |_ A          |______________________|            74HC00P |_
 |_  74LS245P   ______________________           ________  |
 |_            | U9 Empty             |          |HM6116L  |
 |_            |                      |          |_______| |_ J
 |_            |______________________|                    |_ P
 |_  74LS245P                           TD62oo3AP 74LS373P |_ 3
 |_                                            __________  |
 |_  74LS245P                                  |GALv20V8B| |
 |_                                    ______              |
 |_               _____                |DIPS|              |_ P
   |             |U24  |                                   |_ 1
   | 74LS245P                                              |
   | TD62oo3AP                                             |
   |                                                       |
   |_            97              ____________         _____|
     |_|_|_|_|_|_|_|_|_|_|_|_|_|_|           |_|_|_|_|


  IC1 = Surface scracthed out, don't know what is it
  U24 = Surface scratched out, seems like a PROM
    B = Capacitor, but is in what seems to be a place
        for a button battery socket.
 DIPS = Fixed as: 00001000
 ROMS = Toshiba TC574000AD

  JP2, JP3 and P1 connects both boards, also another
  on-board connector is used, see notes for the 68K socket
  for the lower board.


   LOWER BOARD

   _________________________________________________________
   |                                     ____ ____         |
   |  ___                                | I| | I|         |
   |  |I|                                | C| | C|         |
   |  |C|                                | 3| | 2|         |
   |  |1|                                |__| |__|         |
   |  |3|                                                  |__
   |   _                _________________________           __|
   |  |_|               |||||||||||||||||||||||||           __|
   |  IC14              ---------- SLOT ---------           __|
   |               ______________________                   __|
   |              |                      |                  __|
   |  ___         | 68K (to upper board) |   _______        __|
   |  |I|         |______________________|   |SE-94|        __|
   |  |C|                                    |JDDB |      _|
   |  |1|           _______                  |_____|      | 
   |  |2|           |SE-93|                    IC4        | 
   |                |JDDA |                               | 
   |                |_____|                ___________    |_
   |                  IC8                  |Z8400A PS|     |
   |                                       |_________|     |
   |                  ______         _________  _________  |
   |                  | OSC|         | IC11  |  | IC7   |  |
   |            _____________        |_______|  |_______|  |
   |    RST    |            |           CN5        CN6     |
   |___________|            |______________________________|
     

   IC3 = IC2 = Winbond W24257V
   IC7  = 6264LD 9440
   IC11 = SE-95 JDDC
   IC12 = Sony CXA1634P
   IC13 = Sony CXA1145P
   IC14 = GL358 N16

   RST is a reset button.

   OSC = 53.693175 MHz
   
   CN5 and CN6 are 9-pin connectors... serial ports?

   There are two wires soldered directly to two connectors
   of the slot, going to the upper board (via P1).

   The whole upper board is plugged using the 68000 socket,
   there is no 68K on the lower board.

   There is an edge connector, but it isn't JAMMA.

   "HK-986 (KINYO)" is written on the PCB, near the slot.

-