WHAT'S NEW SINCE 0.30:

1. Trace play supports.
   Show your friends your best play records! Use F9 to record, F11 to play.
   Try it now!
2. Scanline display option.
   This option uses 800x600 display mode for doubling every dots. It will
   be a bit slower than the preferred 400x300 hardware double pixel mode.
   But if your system happens to have no usable 400x300 display mode, this
   could work as a solution.
3. Alternate keyboard control set.
4. Sound states are put in save game data now.
5. Fixed two bugs that caused Gallop to crash at certain places.



INSTRUCTIONS

*****Installing M72 emulator
1. Create a M72 emulator directory
   c:\>mkdir M72
2. Unzip the pack.
   c:\M72>pkunzip -d m72.zip
3. Install the ROM packs by copying the ROM packs into ZIPROMS\ sub-directory.
4. Run the game by "m72 game-name".

*****Controls
Currently only player one control is supported. Keyboard and Gamepad are both
supported.

Player control:
          KEYBOARD               GAMEPAD
BUTTON1   LEFT-Ctrl  or TAB      BUTTON1
BUTTON2     ALT      or  Q       BUTTON2
BUTTON3    SPACE     or  W       BUTTON3
BUTTON4   RIGHT-Ctrl or  E       BUTTON4

Panel control(keyboard only):
1           P1 start
2           P2 start
3           Coin 1
4           Coin 2

Special game controls:
F5          Save game
F6 or F8    Change save slot
F7          Restore game
F9          Start/Stop recording trace play data
F10 or F12  Change trace play slot
F11         Start/Stop playing trace play data
S           Save screen
P           Pause
ESC         Quit


Options from command line:
-vsync          syncronize video output with the vertical retrace signal
-r      #       change sampling rate (11025-44100)
-perf           show performance counter (only works on Pentium series CPU)
-ppro           use Pentium-pro optimized routines
-int    #       change interrupt rate [60]
-cpu    #       set V30 operating frequency(MHz) [12]
-gamma  #       gamma correction [1.0]
-skip   #       skip frame [0]
-list           list supported games
-nojoy          disable joystick support
-vert           enable vertical display
-res    #x#     set display mode [400x300] or [512x384] for vertical mode
-qf     #       set quick fire button (1-4)
-scanlines      enable scanline display mode

*****Supported games
Game name                  Internal name
- - - - - - - - - - - - - - - - - - - - -
R-TYPE JP                    rtypejp
Ninja Spirit                 nspirit
Legend of Hero Tonma         loht
Battle Chopper               bchopper
Image Fight                  imgfight
R-TYPE 2                     rtype2
Dragon Breed                 dbreed
Hammerin'Harry               hharry
Gallop - Armed Police Unit   gallop
Mr.HELI(BChopper JP)         mrheli
R-TYPE US                    rtypeus
X-MULTIPLY                   xmultipl



*****Tips
Use "m72 imgfight -vert -qf 1" to start Image Fight in vertical display mode
and set quick-fire on button 1.
Set the gamma value larger than 1 for increasing the display contrast.
Try "-res 640x480" if the default 400x300 or 512x384 display mode is not
applicatable on your video system.
Always use "-ppro" for Pentium-pro and Pentium2 and Celeron systems.
Do not use "-vert" and "-scanlines" at the same time.




*****CREDITS:
AraCorn Of RomList for dumping many M72 ROMs.
JROM for dumping Image Fight and Gallop and MR.HELI and X-MULTIPLY ROMs.
Chris Hardy for M72 hardware infomation and V30 info.
Thierry Lescote for many many helps!
Neil Bradley for the perfect MZ80 core.
Tatsuyuki Satoh for his very good YM2151 core.
Fabrice Frances for the Mame 286 core.
DJ Delorie for the free DJGPP compiler.
Carlos Hasan for the SEAL libreay.
Shawn Hargreaves for the ALLEGRO library.
Simon Tatham for the NASM assembler.



Enjoy!

981010,
Nao

