----------------------------------------------------------------------------
                            emuLaser README
                              October 1999
----------------------------------------------------------------------------


----------------------
INSTALLING AND RUNNING
----------------------
   
   Copy the 3 files from the disk into a directory on your computer.  The
   files must be located in the same directory.  You should have the 
   following files:

   emuLaser.exe
   emuLaser.hlp
   README.txt

   Run emuLaser by double-clicking on the emuLaser.exe executable.



----------------------------------------------------
SOME THINGS TO KEEP IN MIND WHEN USING EMULASER
----------------------------------------------------
1) emuLaser's sound emulation has not been tested on all sound cards.
   Your results may vary.

2) emuLaser runs best when it is the only application running.

3) For best results start emuLaser before connecting your player
   to your computer.

4) Disconnect your player from your computer when not in use.

5) Use only the interface provided.

6) Be sure that the interface box is connected in the proper direction.  The
   side labeled "PC" should go to your computer's parallel port.  The side
   labeled "LP" should attach to the ribbon cable which then connects to 
   your LD-V1000.

7) Do not bypass the interface box and connect the ribbon cable directly
   to your computer.

8) A printer cable can be used as an "extension cord" to reach your
   player.

