Welcome to SHARP PC Simulator for EL-W531TG
================================================================================
	ReadMe File

Ver. 1.1  : Apr.3, 2017

================================================================================
  CONTENTS
================================================================================
1.  Introduction
2.  Prerequisites
3.  Installation and how to use
4.  Uninstallation
5.  Known Anomalies 
6.  License Agreement

================================================================================
1. INTRODUCTION
================================================================================
You can emulate calculation for SHARP EL-W531TG.
There is also Screen capture utilities.

================================================================================
2. PREREQUISITES
================================================================================
Recommended system requirements
Microsoft(R) Windows (R) 7 (32bit Edition: Home Basic/Home Premium/Professional
  Enterprise/Ultimate)
 Processor...A 1.5-gigahertz (GHz) Intel(R) Celeron(R) M Processor or higher
 RAM...1 gigabytes (GB) or higher
 Monitor...XGA (1024 x 768) resolution or higher, 16-bit color or higher 

Microsoft(R) Windows (R) 7 (64bit Edition: Home Basic/Home Premium/Professional
  Enterprise/Ultimate)
 Processor...A 1.5-gigahertz (GHz) Intel(R) Celeron(R) M Processor or higher
 RAM...2 gigabytes (GB) or higher
 Monitor...XGA (1024 x 768) resolution or higher, 16-bit color or higher 

Microsoft(R) Windows (R) 8.1 (32bit Edition: Windows 8.1/Pro)
 Processor...1 gigahertz (GHz) or faster with support for PAE, NX, and SSE2
 RAM...1 gigabytes (GB) or higher
 Monitor...XGA (1024 x 768) resolution or higher, 16-bit color or higher 

Microsoft(R) Windows (R) 8.1 (64bit Edition: Windows 8.1/Pro)
 Processor...1 gigahertz (GHz) or faster with support for PAE, NX, and SSE2 
 RAM...2 gigabytes (GB) or higher
 Monitor...XGA (1024 x 768) resolution or higher, 16-bit color or higher 

Microsoft(R) Windows (R) 10 (32bit Edition: Home/Pro/Education/Enterprise)
 Processor...1 gigahertz (GHz) Processor or higher
 RAM...1 gigabytes (GB) or higher
 Monitor...XGA (1024 x 768) resolution or higher, 16-bit color or higher 

Microsoft(R) Windows (R) 10 (64bit Edition: Home/Pro/Education/Enterprise)
 Processor...1 gigahertz (GHz) Processor or higher 
 RAM...2 gigabytes (GB) or higher
 Monitor...XGA (1024 x 768) resolution or higher, 16-bit color or higher 

* Requires 10MB hard disk space for installation.
* Need English operation system.
* All company and/or product names are trademarks and/or registered trademarks 
  of their respective holders.
* If any official approval is required by a government authority to export or 
  re-export the Software , such export or re-export is subject to that approval.
  You shall obtain the necessary approval to export or re-export the Software 
  and comply in all respects with  applicable laws, regulations and court 
  orders, including but not limited to laws and regulations on export control, 
  in each countries.

================================================================================
3. INSTALLATION AND HOW TO USE
================================================================================
  1. Read "6.LICENSE AGREEMENT" below and agree the terms and conditions. 
  2. Unpack the ZIP file to the folder you want to install the program.
  3. Execute 'EL_W531TG_Simulator.exe' to start program.
    - Now it can use as of the simulator.

  * Please don't press the CANCEL button of 'WinZip Self-Extractor' window
    while running this Simulator.
  * The following operation is not supported;
    - To pin this PC simulator program on the taskbar/the start screen.
  * If the calculator need to RESET, press Reset button.

 <Screen capture>
  1. Display an image to be captured.
  2. Press Capture button.
      - Screen is now saved to 'Documents\CalcDispImage' folder.

  * If you wish to review the screen captured images,
    please press 'Open Image Folder' button.
  * Please don't delete 'Documents\CalcDispImage' folder while running this 
    simulator. Should you delete the folder accidentally, please close and restart
    the simulator. The folder will be created automatically.
 
================================================================================
4. UNINSTALLATION
================================================================================
  1.Select and delete all the files and folders created by unpacking.


================================================================================
5. KNOWN ANOMALIES
================================================================================
* If you have problems running the Simulator, disable any virus checking 
  software you may be running.

<Operation differences from EL-W531TG>
 1. Cannot change contrast.
 2. Does not turn off automatically.
 3. Less variety in number of Random function (including R.DICE, R.COIN, and 
    R.Int) and question of the drill function. 
 4. Cursor does not blink.
 5. Any value stored in memory will be cleared when the application is closed.

================================================================================
6. LICENSE AGREEMENT
================================================================================
Each license agreement below is for a different region. 
Before using this product, please read the agreement for the area in which you 
live.

Jedes Lizenzabkommen ist fuer eine andere Region. Bitte lesen Sie vor der 
Verwendung dieses Produktes das Abkommen fuer den Bereich, in dem Sie leben.

Cada acuerdo de licencia de abajo es para una region diferente. Antes de 
utilizar este producto, lea el acuerdo para el area en la que usted vive.

Chaque contrat de licence ci-dessous est pour une region differente. Avant 
d'utiliser cet appareil, veuillez lire le contrat destine a la region dans 
laquelle vous vivez.

Di seguito sono stampati i contratti di licenza validi per varie regioni del 
mondo. Prima di utilizzare questo prodotto, si prega di leggere il contratto 
valido per il paese in cui si vive.

Iedere onderstaande licentie-overeenkomst is voor een ander gebied. Raadpleeg de 
overeenkomst voor het gebied waarin u woont voordat u het product in gebruik 
neemt.

Cada contrato de licenca abaixo e para uma regiao diferente. Antes de utilizar 
este produto, por favor leia o contrato para a area na qual mora.

< In the U.S.A. or countries for which specific license agreements are not given 
below >
END-USER NOTICE AND LICENSE AGREEMENT FROM SHARP CORPORATION ("SHARP").

PLEASE READ THE FOLLOWING END-USER LICENSE AGREEMENT BEFORE INSTALLATION OF THE 
SOFTWARE. YOUR INSTALLATION OF THE SOFTWARE WILL BE DEEMED ACCEPTANCE OF THE 
TERMS AND CONDITIONS OF THE FOLLOWING AGREEMENT.

All copyrights and other intellectual property rights in the software of SHARP 
PC Simulator for EL-W531TG (herein after referred to as "the Software")
are owned by SHARP. In consideration of the license fee, which is a part of the 
price you paid for this product, SHARP grants you, an individual 
("the Licensee"), a non-exclusive software license to use the Software and 
related documentation supplied herein.(If the software is purchased.)

The terms of this license are as follows:
1. You may use the Software on one pair of computers at a time.

2. As the Licensee, you own the physical media on which the Software is 
   recorded, SHARP retains title and ownership of the Software.

3. You are required to protect the copyright of the Software. You may NOT 
   distribute or otherwise make the Software or documentation available to any 
   third party without the prior written consent of SHARP. You may be held 
   legally responsible for any copyright infringement that is caused or 
   encouraged by your failure to abide by the terms of this License.

4. You may NOT (a.) use, copy, modify, alter, or transfer the Software or the 
   Operation Manual except as expressly provided in this License; (b.) 
   translate, disassemble, decompile, reverse program or otherwise reverse 
   engineer the Software; (c.) sublicense or lease the Software or its 
   documentation; or (d.) use the Software in a multi-user, network, or multiple 
   computer environment or in a rental, time sharing or computer service 
   business. Any portion of the Software that is merged into or used in 
   conjunction with other software will continue to be the property of the 
   Licenser, and will be subject to the terms of this License.

5. You are permitted to copy the Software for exclusive use as your working copy. 
   Any such copy must contain the same copyright notice and proprietary marking 
   as the original Software.

6. You may not transfer or assign the Software or this License to any other 
   person without the prior written consent of SHARP. Any authorized transferee 
   of the Software shall be bound by the same terms and conditions of the 
   License and, in such case your license is automatically terminated. In no 
   event may you transfer, assign, rent, sell, or otherwise dispose of the 
   Software on a temporary or permanent basis except as expressly provided 
   herein.

7. This License is effective until terminated. This License will terminate 
   automatically without notice from SHARP, if you fail to comply with any 
   provision of this Agreement. Upon termination you will destroy the Software 
   together with all copies and modifications in any form.

8. The Software has been tested and the documentation has been reviewed. 
   However, NEITHER SHARP MAKES ANY WARRANTY OR REPRESENTATION INCLUDING THE 
   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE, ALL OF WHICH ARE 
   EXCLUDED. Some states do not allow the exclusion of incidental or 
   consequential damages so the above exclusion may not apply to you.

9. SHARP WILL NOT BE LIABLE OR IN ANY WAY RESPONSIBLE FOR ANY INCIDENTAL OR 
   CONSEQUENTIAL ECONOMIC OR PROPERTY DAMAGE IN CONNECTION WITH THE SOFTWARE OR 
   ITS DOCUMENTATION. Some states do not allow the exclusion of incidental or 
   consequential damages so the above exclusion may not apply to you.

10. Restricted Rights Legend. The Software and documentation have been developed 
   at private expense and are commercially available at published prices. If 
   such software and documentation are acquired under a United States Department 
   of Defense contract, use duplication, or disclosure by the Government is 
   subject to restrictions as set forth in subparagraph (c)(i)(ii) of the Rights 
   in Technical Data and Computer Software clause at DFARS 252.227-7013 
   (June 1988).
   Contractor: Sharp Corporation, 1 Takumi-cho, Sakai-ku, Sakai City, Osaka 590-8522 
   Japan. If such software and documentation are acquired by any other agency of 
   the U.S. Government, use duplication, or disclosure by the Government is 
   subject to restrictions as set forth in subparagraph (g)(3) of FAR 52.227-14 
   (June 1987) Alternate 111(g)(June 1987) or FAR 52.227-19 (June 1987), as 
   applicable.

< In Canada >
LIMITED USE SOFTWARE LICENSE

In consideration of the license fee, which is a part of the price you paid for 
this product, Sharp Corporation, as the Licensor, grants to you, the Licensee, a 
non-exclusive software license to use the software and related documentation 
supplied herein.(If the software is purchased.) 
The terms of this license are as follows:
 1. You may use the software (hereinafter referred to as "the Software") on a 
    single computer at a single location.

 2. As the Licensee, you own the physical media on which the Software is 
    recorded. Sharp Corporation retains title and ownership of the software 
    contained in the enclosed floppy disk exclusively, regardless of the form or 
    media in or on which the original and other copies may exist. This License 
    is not a sale of the original Software or any copy thereof.

 3. You are required to protect the copyright of the Software. You may NOT 
    distribute or otherwise make the Software or documentation available to any 
    third party without the prior written consent of Sharp Corporation. You may 
    be held legally responsible for any copyright infringement that is caused or 
    encouraged by your failure to abide by the terms of this License.

 4. You may NOT modify or alter the Software. Any portion of the Software that 
    is merged into or used in conjunction with other software will continue to 
    be the property of Sharp Corporation and will be subject to the terms of 
    this License.

 5. You are permitted to copy the Software for exclusive use as your working 
    copy. Any such copy must contain the same copyright notice and proprietary 
    marking as the original Software.

 6. You may not transfer or assign the Software or this License to any other 
    person without the prior written consent of Sharp Corporation. Any 
    authorized transferee of the Software shall be bound by the same terms and 
    conditions of this License and, in such case your license is automatically 
    terminated. In no event may you transfer, assign, rent, sell, or otherwise 
    dispose of the Software on a temporary or permanent basis except as 
    expressly provided herein.

 7. This License is effective until terminated. This License will terminate 
    automatically without notice from Sharp Corporation if you fail to comply 
    with any provision of this Agreement. Upon termination you will destroy the 
    Software together with all copies and modifications in any form.

 8. The Software has been tested and the documentation has been reviewed. 
    However, SHARP CORPORATION MAKES NO WARRANTY OR REPRESENTATION INCLUDING 
    THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE, ALL OF WHICH 
    ARE EXCLUDED. Some countries do not allow exclusion of implied warranties 
    so the above disclaimer may not apply to you.

 9. Sharp Corporation will not be liable or in any way responsible for any 
    incidental or consequential economic or property damage in connection with 
    the Software or its documentation. Some states do not allow the exclusion of 
    incidental or consequential damages so the above exclusion may not apply to 
    you.

THIS LICENSE GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS 
WHICH MAY VARY FROM PROVINCE TO PROVINCE.

< In England >
END-USER NOTICE AND LICENCE AGREEMENT FROM SHARP CORPORATION ("SHARP").

PLEASE READ THE FOLLOWING END-USER LICENCE AGREEMENT BEFORE INSTALLATION OF THE 
SOFTWARE. YOUR INSTALLATION OF THE SOFTWARE WILL BE DEEMED ACCEPTANCE OF THE 
TERMS AND CONDITIONS OF THE FOLLOWING AGREEMENT.

All copyright and other intellectual property rights in the software of SHARP PC 
Simulator for EL-W531TG (herein after referred to as "the Software") 
are owned by SHARP. In consideration of the licence fee, which is a part of the 
price you paid for this product, SHARP grants you, an individual 
("the Licensee"), a non-exclusive software licence to use the Software and 
related documentation supplied herein.(If the software is purchased.)

The terms of this licence are as follows:
1. You may use the Software on one pair of computers at a time.

2. As the Licensee, you own the physical media on which the Software is 
   recorded, SHARP retains title and ownership of the Software.

3. You are required to protect the copyright of the Software. You may NOT 
   distribute or otherwise make the Software or documentation available to any 
   third party without the prior written consent of SHARP. You may be held 
   legally responsible for any copyright infringement that is caused or 
   encouraged by your failure to abide by the terms of this licence.

4. You may NOT (a.) use, copy, modify, alter, or transfer the Software or the 
   operation manual except as expressly provided in this licence; (b.) 
   translate, disassemble, decompile, reverse programme or otherwise reverse 
   engineer the Software; (c.) sublicence or lease the Software or its 
   documentation; or (d.) use the Software in a multi-user, network, or multiple 
   computer environment or in a rental, time sharing or computer service 
   business. Any portion of the Software that is merged into or used in 
   conjunction with other software will continue to be the property of the 
   Licensor, and will be subject to the terms of this licence.

5. You are permitted to copy the Software for exclusive use as your working or 
   back-up copy. Any such copy must contain the same copyright notice and 
   proprietary marking as the original Software.

6. You may not transfer or assign the Software or this licence to any other 
   person without the prior written consent of SHARP. Any authorized transferee 
   of the Software shall be bound by the same terms and conditions of the 
   licence and, in such case your licence will be automatically terminated. 
   In no event may you transfer, assign, rent, sell, or otherwise dispose of the 
   Software on a temporary or permanent basis except as expressly provided 
   herein.

7. This licence is effective until terminated. This licence will terminate 
   automatically without notice from SHARP, if you fail to comply with any 
   provision of this Agreement. Upon termination you will destroy the Software 
   together with all copies and modifications in any form.

8. To the maximum extent permitted by law and provided that the statutory rights 
   of a consumer are not affected, SHARP excludes all warranties, whether 
   express or implied, with respect to the software and the accompanying written 
   materials. SHARP does not warrant, guarantee, or make any representations 
   regarding the use or the results of the use, of the software and the 
   accompanying written materials in terms of correctness, accuracy, reliability 
   or otherwise; the entire risk as to the results and the performance of the 
   Software is assumed by the licensee.

9. SHARP WILL NOT BE LIABLE OR IN ANY WAY RESPONSIBLE FOR ANY INCIDENTAL OR 
   CONSEQUENTIAL ECONOMIC LOSS OR PROPERTY DAMAGE CAUSED AS A RESULT OF YOUR USE 
   OF THE SOFTWARE OR ITS DOCUMENTATION.

< In Australia >
LIMITED USE SOFTWARE LICENSE

In consideration of the license fee, which is a part of the price you paid for 
this product, Sharp Corporation, as a Licensor, grants to you, the Licensee, a 
non-exclusive software license to use the Software and related documentation 
supplied herein.(If the software is purchased.)
The terms of this license are as follows:
1. You may use the Software on a single computer at a single location.

2. As the Licensee, you own the physical media on which the Software is 
   recorded. Sharp Corporation retains title and ownership of the software 
   (hereinafter referred to as "the Software") contained in the enclosed floppy 
   disk exclusively, regardless of the form or media in or on which the original 
   and other copies may exist. This License is not a sale of the original 
   Software or any copy thereof.

3. You are required to protect the copyright of the Software. You may NOT 
   distribute or otherwise make the Software or documentation available to any 
   third party without the prior written consent of Sharp Corporation. You may 
   be held legally responsible for any copyright infringement that is caused or 
   encouraged by your failure to abide by the terms of this License.

4. You may NOT modify or alter the Software. Any portion of the Software that is 
   merged into or used in conjunction with other software will continue to be 
   the property of Sharp Corporation and will be subject to the terms of this 
   License.

5. You are permitted to copy the Software for exclusive use as your working 
   copy. Any such copy must contain the same copyright notice and proprietary 
   marking as the original Software.

6. You may Not transfer or assign the Software or this License to any other 
   person without the prior written consent of Sharp Corporation. Any authorized 
   transferee of the Software shall be bound by the same terms and conditions of 
   this License and, in such case your license is automatically terminated. In 
   no event may you transfer, assign, rent, sell, or otherwise dispose of the 
   Software on a temporary or permanent basis except as expressly provided 
   herein.

7. This License is effective until terminated. This License will terminate 
   automatically without notice from Sharp Corporation if you fail to comply 
   with any provision of this Agreement. Upon termination you will destroy the 
   Software together with all copies and modifications in any form.

THE BENEFITS CONFERRED BY THIS LICENSE ARE IN ADDITION TO ALL OTHER RIGHTS AND 
REMEDIES YOU HAVE IN RESPECT OF THE PRODUCT UNDER THE TRADE PRACTICES ACT AND 
SIMILAR STATE AND TERRITORY LAWS.

< In Deutsch > 
Jedes Lizenzabkommen ist fuer eine andere Region. Bitte lesen Sie vor der 
Verwendung dieses Produktes das Abkommen fuer den Bereich, in dem Sie leben.

Software Nutzungsrechte

Bitte beachten Sie, dass die Software und das Handbuch urheberrechtlich geschuetzt 
sind. SHARP raeumt Ihnen an der ueberlassenen Software ein nicht ausschliessliches, 
raeumlich und zeitlich unbegrenztes Nutzungsrecht fuer die Nutzung der Software 
auf einem Geraet ein. Das Programm darf nur zum Zwecke der Herstellung einer 
Programmkopie, die der Programmsicherung dient, kopiert werden, es sei denn, 
eine Sicherungskopie ist in dem Lieferumfang enthalten.  
Bei Wechsel der Hardware ist die Software auf der bisher verwendeten Hardware zu 
loeschen. Sie sind berechtigt, die Software auf Dauer an Dritte zu veraeussern oder 
zu verschenken, vorausgesetzt, der erwerbende Dritte erklaert sich mit der 
Weitergeltung der vorstehenden Bedingungen auch ihm gegenuber einverstanden. Im 
Falle der Weitergabe ist die Software auf der von Ihnen verwendeten Hardware zu 
loeschen und dem Dritten sind saemtliche Programmkopien einschliesslich etwaiger 
Sicherungskopien zu uebergeben oder nicht uebergebene Disketten sind zu vernichten.

< En Espana > 
Derechos de software

Tenga en cuenta que el software y el manual de manejo estan protegidos por 
derechos de autor. A usted se le otorga un derecho no exclusivo, transferible e 
ilimitado para utilizar el software en un aparato. Se le permite hacer una copia 
de seguridad para garantizar la seguridad del programa si no se le ha 
suministrado una copia de seguridad. La copia de seguridad debera ser marcada 
como tal.
Si cambia de hardware, debera borrar el software del hardware utilizado 
previamente. Usted tiene derecho a entregar el software a terceras personas en 
base permanente siempre que la tercera persona que lo adquiera declare su 
acuerdo con las condiciones estipuladas mas arriba. Si se entrega el software, 
este debera ser borrado de su hardware, y todas las copias del programa y las 
copias de seguridad deberan ser entregadas a la tercera persona, y los discos 
que no sean entregados deberan ser destruidos.

< En France > 
Droits d'auteur

Veuillez noter que le logiciel le son mode d'emploi sont couverts par des droits 
d'auteur. Il vous a ete accorde une licence non exclusive, transferable et 
illimitee, d'utiliser ce logiciel sur du materiel informatique.  Vous avez 
egalement le droit d'en effectuer une copie de secours, dans la mesure ou une 
copie de cette nature ne vous a pas ete fournie. La copie de secours doit etre 
identifiee comme telle.
Avant de remplacer le materiel sur lequel le logiciel se trouve installe, vous 
devez effacer le logiciel. Vous avez le droit de remettre le logiciel a une 
tierce personne, a titre definitif, sous reserve qu'elle s'engage a respecter 
les conditions enoncees ci-dessus. Avant de remettre le logiciel a une tierce 
personne, vous devez l'effacer du materiel sur lequel il est installe. En outre, 
vous devez remettre a la tierce personne la copie de secours que vous avez 
eventuellement realisee ; au lieu de remettre cette copie, vous pouvez detruire 
les disquettes qui la portent.

< In Italia > 
Diritti sul software

Il software e il manuale di istruzioni sono protetti da copyright. All'utente 
viene concesso il diritto non esclusivo, trasferibile e illimitato di utilizzare 
il software su una macchina. E consentito all'utente effettuare una copia di 
backup, che garantisce la sicurezza del programma nel caso che non sia gia stata 
fornita una copia di backup. La copia di backup deve essere contrassegnata come 
tale.
Se si sostituisce l'hardware, e necessario eliminare il software dall'hardware 
utilizzato in precedenza.  All'utente viene consentito di cedere il software a 
terze parti su base permanente, a patto che la terza parte che lo acquista 
dichiari il suo consenso all'applicazione ulteriore nei suoi confronti delle 
condizioni citate sopra. Se il software viene ceduto, deve essere eliminato 
dall'hardware dall'utente, e tutte le copie del programma, compresa qualsiasi 
copia di backup, devono essere consegnate alla terza parte e i dischetti non 
utilizzati devono essere distrutti.

< In Nederland > 
Software-rechten

Wij willen u erop attent maken dat deze software en de gebruikersaanwijzing 
beschermd zijn door auteursrechten. Aan de koper van dit product wordt een niet-
exclusieve, overdraagbare en onbeperkte licentie verleend voor het gebruik van 
deze software op een machine. U mag ook een reservekopie maken voor beveiliging 
van de software, indien er geen reservekopie is meegeleverd. U dient de 
reservekopie als zodanig te markeren.
Indien u nieuwe hardware aanschaft en hierop de software installeert, dient u de 
software van de voorheen gebruikte hardware te verwijderen. U mag de software 
aan derden doorgeven, vooropgesteld dat de betreffende partij verklaart de 
bovenstaande voorwaarden voor het gebruik van de software in acht te zullen 
nemen. Indien de software aan derden wordt doorgegeven, dient u deze van uw 
eigen hardware te verwijderen en eventuele kopieen, inclusief de reservekopieen, 
moeten aan de andere partij worden gegeven of de diskettes moeten vernietigd 
worden.

< Em Portugal > 
Direitos do Software

Repare por favor que o software e o manual de instrucoes sao protegidos pela lei 
dos direitos autorais. Voce recebe um direito nao exclusivo, transferivel e 
ilimitado para utilizar o software em um unico equipamento. Voce tambem recebe o 
direito de fazer uma copia de seguranca para garantir a seguranca do programa se 
uma copia de seguranca nao for fornecida. A copia de seguranca deve ser marcada 
como tal.
Ao substituir o hardware, voce deve apagar o software no hardware usado 
anteriormente. Voce esta autorizado a transferir o software para terceiros numa 
base permanente, contanto que o adquirente declare sua concordancia com as 
condicoes estipuladas acima. Se o software for transferido, ele deve ser apagado 
de seu hardware, e todas as copias do programa, incluindo quaisquer copias de 
seguranca, devem ser passadas para o adquirente ou ser destruidas.
 
================================================================================