
Setting up the Windows NT device driver for the Gemulator ROM card
==================================================================

This directory includes a simplied installation utility for setting up the
ROM card device driver for Windows NT and Windows 2000. Type INSTALL. Then
reboot Windows NT or Windows 2000.

The driver can also be installed manually using the following directions:

The file GEM98.SYS should go in your NT directory's SYSTEM32\DRIVERS
directory. Then you need to set up the registry to find and start the driver.

You can do this by running REGINI.EXE GEMULATOR.REG. Change the IoPortAddress
in the REG file to set the port number of the ROM card.

After you set up the registry, reboot NT so that the driver activates. You can
verify that the driver started by running Control Panel \ Drivers. You should
see a Gemulator device listed and it will say Started beside it.

