Nouvelle update avec l’ajout de certains dumps taito type X\/X\u00b2. Bon ca ne sera pas \u00e9mul\u00e9 avec des ann\u00e9es si ca l’est un jour donc \u00e9pargnez vous des giga pour rien^^<\/p>\n
<\/p>\n
<\/p>\n
0.149u1\r\n-------\r\nMAMETesters Bugs Fixed\r\n----------------------\r\n- 05215: [Crash\/Freeze] (pce.c) [pce] cdrom games: Peroidic\r\ncrashes or black screen (Fabio Priuli)\r\n\r\nNew System Drivers Supported:\r\n-----------------------------\r\n(none)\r\n\r\nSystems Promoted from GAME_NOT_WORKING:\r\n---------------------------------------\r\n(none)\r\n\r\nSkeleton drivers:\r\n-----------------\r\n-EVMBUG (Texas Instruments TMS9995 Trainer) [Robbbert]\r\n-Ithaca InterSystems DPS-1 [Al Kossow, Curt Coder]\r\n\r\nSoftware Lists:\r\n----------------\r\n-pet_flop.xml: Added Z-RAM floppy. [Mike Naberezny]\r\n\r\n-Added software list for BASIC programs saved to tape\r\n[Anna Wu, UglyJoe, Fabio Priuli]\r\n\r\n-victor9k_flop.xml: Added preliminary software list.\r\n[Jonathan Gevaryahu]\r\n\r\n-alphatro_flop.xml: Added floppy software list. [Spirantho]\r\n\r\n-ibm5150.xml: Added a few more disks [Kaylee]\r\n\r\n-bml3: added software list for floppy disks. [Anna Wu]\r\n\r\n-ibm5140.xml: Added floppies and fixed form factor. [Curt Coder]\r\n\r\n-ibm5170.xml: Added IBM diagnostics floppies. [Curt Coder]\r\n\r\n-pet_flop.xml: Added 8050 version of VisiCalc. [Curt Coder]\r\n\r\nSource Changes\r\n--------------\r\n\r\n-softbox: Fixed reset. [Mike Naberezny]\r\n\r\n-corvushd: Supported 4 hard disks and usage from within a device. [Curt Coder]\r\n\r\n-Added skeleton for IMI 5000H hard disk controller. [Curt Coder, Al Kossow]\r\n\r\n-PC driver cleanup: [Dirk Best]\r\n* Much improved CS4031 emulation, added DMA, interrupt controller,\r\ntimer, RTC directly to the device as sub devices and added the\r\ngeneric functions needed for AT compatibility\r\n* Moved the ct486 driver to its own file, to avoid all the legacy\r\nstuff in at.c\r\n* Added support for the IOCHCK signal to the ISA bus, this is used\r\ninstead of directly issuing an NMI to the main CPU\r\n* Moved ISA device slot definitions to its own file to avoid copy &\r\npasting the same list to different drivers\r\n* Updated MC146818 RTC for devcb2\r\n\r\n-Added skeleton device for Mator SHARK (22 MB Winchester hard\r\ndisk for the Commodore PET). [Curt Coder, Mike Naberezny]\r\n\r\n-Rename the bridge challenger 3 model 7014 driver from 'abc' to\r\n'bridgec3', added pcb locations, notes, and better labels.\r\n[Lord Nightmare]\r\n\r\n-famicom: added support for loading\/saving BASIC programs\r\nfrom\/to cassette. wav files supported only. [Fabio Priuli]\r\n\r\n-nes.c: improvements and fixes to inputs [Fabio Priuli]\r\n* simplified input reading\r\n* moved most Famicom controllers to the expansion port (still\r\nconfigurable in the Driver Config menu) because it is more\r\naccurate and because it allows to use both the FC keyboard and the\r\ncontrollers in BASIC games\r\n* fixed NES paddle emulation which broke some years ago\r\n* added FC paddle emulation, see Arkanoid and Chase HQ\r\n* added Hori Twin Adapter with correct P3 & P4 Famicom protocol, see\r\ne.g. four players games by Technos Japan\r\njust a cleanup and the whatsnew entry for previous changes...\r\n\r\n-nes.c: emulated microphone input for old famicom controller, as\r\ndetected by games (i.e. it only detects voice\/no voice, while the\r\nactual transmission of your voice to the speakers is not emulated). To\r\nuse it in games expecting you to blow or shout in the mic, select the\r\n\"Gamepad (Older Version)\" as \"P2 Controller\" in the Driver\r\nConfiguration submenu, and press \"6\" when the game requires it.\r\n[Fabio Priuli]\r\n\r\n-nes.c: added emulation of the NES Power Pad controller, to be\r\nenabled in Controller Port 2 through the Driver Configuration submenu,\r\nand mapped by default on TY,FGHJ,BN keys for side A layout and\r\nRTYU,FGHJ,VBNM keys for side B. [Fabio Priuli]\r\n\r\n-MEK6800D2 : Added cassette interface, system listed as WORKING [Robbbert]\r\n\r\n-nes.c: added emulation of the FC Family Trainer controller, to\r\nbe enabled in Expansion Port through the Driver Configuration submenu,\r\nand mapped by default like the Power Pad. [Fabio Priuli]\r\n\r\n-corvushd: Fixed physical sector calculation. [Mike Naberezny]\r\n\r\n-snes.c: simplified input handling and made controller ports 16bits\r\nwide, since this is the way they are accessed by our code.\r\n[Fabio Priuli]\r\n\r\n-snes.c: simplified input handling, moved the console specific\r\ninputs to MESS driver and added preliminary Multitap support. Multitap\r\nhas to be enabled in the Driver Configuration menu. The code is\r\nconsidered preliminary because some games recognize 4 pads (e.g.\r\nKunio-kun no Dodge Ball), other ones recognize 3 pads only (e.g. Super\r\nBomberman 3, 4 & 5) and some recognize 2 pads only (e.g. FIFA 96 and\r\n97). [Fabio Priuli]\r\n\r\n-Acorn System 1: added cassette [Robbbert]\r\n\r\n-corvushd: Fixed log message. [Mike Naberezny]\r\n\r\n-sms: Converted SMS inputs to use slot devices. You now select\r\ncontrollers in the Slot Devices menu of the internal UI, not in the\r\nDriver Configurations anymore. [Enik]\r\n\r\n-bml3: split into three variants (bml3, bml3a and bml3b)\r\naccording to floppy disk support. Only bml3a (5.25\" disk) is\r\nconsidered working. [jedwidz]\r\n\r\n-c64: Updated SwiftLink\/Turbo232 settings. [Mike Naberezny]\r\n\r\n-SNES SA-1 improvements [R. Belmont]\r\n* S-CPU can properly write to SA-1 registers\r\n* SA-1 CPU boots properly from its own vectors\r\n* Interrupt controller implemented\r\n* Message-passing registers and status flags hooked up\r\n\r\n-SNES SA-1: fixed initial SA-1 status and added preliminary SA-1\r\nto S-CPU IRQ. [R. Belmont]\r\n\r\n-gameboy: converted the various LCD types (DMG, MGB, CGB...) to\r\nbe devices. [Fabio Priuli]\r\n\r\n-pet: Fixed ROM signatures for Mator Shark hard drive. [Mike Naberezny]\r\n\r\n-Fidelz80.c: rename vbc to vbrc, and noted that Fidelity Bridge\r\nChallenger models VBRC and 7002 are two names for the same thing.\r\n[Lord Nightmare, Cowering, Kevtris]\r\n\r\n-apollo: fixed disk and tape DMA, improved logging [Hans Ostermeyer]\r\n\r\n-ibm5170: Emulated the IBM Model F PC\/AT 84-key keyboard. [Curt Coder, John Elliott]\r\n\r\n-Apollo: fix out-of-bounds framebuffer access crash on OS X [Hans Ostermeyer]\r\n\r\n-SNES SA-1 work: [Fabio Priuli, R. Belmont]\r\n* Initial support for plain SA-1 DMA\r\n* Fixed incorrect BWRAM banking\r\n* Fixed SA-1 vectors to not blot out all banks\r\n* Added S-CPU vector override\r\n* Fire interrupt for CC type 1; this allows levelling up in SMRPG\r\n(gfx not correct yet)\r\n\r\n-bml3: Add stub variants bml3mk2 (for MB-6891) and bml3mk5 [jedwidz]\r\n(for MB-6892). For now these behave the same as bml3\r\n(MB-6890). Refactor disk controllers and kanji ROM as slot devices.\r\nThis allows switching between MP-1802 and MP-1805 disk controllers.\r\nMP-1805 disk controller now works. Kanji ROM now works. Keyboard\r\nscanning in 'counter disabled' mode now works.\r\n\r\n-imgtool: Add bml3 driver, supporting both single-density (MP-1805 [jedwidz]\r\ncontroller) and double-density (MP-1802 controller) disks in D88\r\nformat.\r\n\r\n-ibm5160: Emulated the IBM Model F PC\/XT 83-key keyboard.\r\n[Curt Coder, John Elliott]\r\n\r\n-PDP1 : Fixed loading of paper tape, Spacewar works again [Robbbert]\r\n\r\n-TX0 : Fixed paper tape reader [Robbbert]\r\n\r\n-Fixes for building MESS with Visual Studio 2013 preview [smf]\r\n\r\n-Vtech1 : fixed i\/o error when reading disks. [Robbbert]\r\n\r\n-vtech1: fixed i\/o ports for vz300, laser310 allowing disk to work. [Robbbert]\r\n\r\n-pc1640: Promoted to working with imperfect graphics, the\r\nextended Paradise EGA-350 video modes are not supported yet.\r\n[Curt Coder]\r\n\r\n-sms.c: Converted TH line callbacks to use write_line. [Enik Land]\r\n\r\n-Ensoniq 16-bit: better A\/D parameter handling, allow panel\r\ndevice to send new analog data. [Christian Brunschen]\r\n\r\n-a7800.c - XM\/XBoard POKEY support. 'Bentley Bear - Crystal Quest' &\r\n'Donkey Kong XM' now work, while maintaining support for original\r\nlibrary titles, Commando and Ballblazer. [Robert Tuccitto]\r\n\r\n-Mac updates: [R. Belmont]\r\n* Corrected memory map errors with the SE and Classic\r\n* Preliminary support for the SE's 68000 processor-direct slot\r\n* Preliminary support for the Radius Full Page Display card which\r\ngoes in the SE PDS slot\r\n\r\n-softbox: Added reset when IEEE-488 IFC is asserted. [Mike Naberezny]<\/pre>\n
\nLes builds sont disponibles avec MESSUI (voir plus haut).
\n <\/p>\n