La derni\u00e8re version b\u00e9ta publique de l’excellent WinUAE, l’\u00e9mulateur Commodore Amiga.<\/p>\n
<\/p>\n
– HAM-E images updated only every other line in doubled modes.<\/em> <\/p>\n T\u00e9l\u00e9charger WinUAE (Public Beta) v3.1.0 Beta 4 (4,3 Mo)<\/a><\/p>\n
\n – Graffiti didn’t sync correctly if config was not AGA.<\/em>
\n – Restart button crashed if hardware RTG was enabled.<\/em>
\n – PCMCIA IDE didn’t work anymore (b2)<\/em>
\n – .pkd file extension inside archive wasn’t autodetected.<\/em>
\n – Disk\/CD insert status message file name was shown as \u00ab\u00a0null\u00a0\u00bb if file was inside archive root.<\/em>
\n – HD and tape SCSI emulation unsupported LUN sense data was overwritten with default ILLEGAL FIELD IN CDB sense data.<\/em>
\n – CD SCSI emulator didn’t check for non-zero LUNs.<\/em>
\n – Return SCSI-1 HD inquiry data only if A590\/A2091.<\/em>
\n – Show also REQUEST SENSE command and data if scsi emulation logging is enabled.<\/em>
\n – 68000 prefetch mode DIVS\/DIVU timing update didn’t work, always returned 4 cycles due to missing parenthesis.<\/em>
\n – Switching chip ram and\/or slow ram size usually crashed after reset if ECS Agnus was selected.<\/em>
\n – Some very old statefiles had Z2 fast ram with zeroed autoconfig address, added workaround (broke during 2.9 betas)<\/em>
\n – Added fl <lines to wait> or fl <absolute line> <absolute hpos> and fc <CCKs to wait> break points to debugger.<\/em>
\n – Z3 space memory mapping was not initialized if only non-RAM\/VRAM Z3 expansions are configured.<\/em>
\n – Clock sync feature update, previously only 50Hz CIA-A TOD rate was fully accurate.<\/em>
\n – Load CDTV\/CD32 state file, load other state file: CDTV\/CD32 CD was still mounted.<\/em>
\n – Yet another bitplane DMA sequencer emulation rewrite and cleanups. Still some bitplane DMA on\/off switch edge cases remaining Switch on bitplane DMA near end the scanline: following line starts DMA for one \u00ab\u00a0block\u00a0\u00bb only, next line works normally. This needs more real hardware testing to find exact conditions.<\/em>
\n – Source cleanup, moved all kinds of device init\/free\/interrupt check codes to common file from non-related source files.<\/em>
\n – Added name to UAE Boot ROM DiagArea. (May be visible in some system info\/diagnostics software)<\/em>
\n – HALT status was not cleared when loading new state file.<\/em><\/p>\n