La derni\u00e8re version b\u00e9ta publique de l’excellent WinUAE, l’\u00e9mulateur Commodore Amiga.<\/p>\n
<\/p>\n
– Mainboard SCSI controllers didn’t initialize correctly (A3000\/A4000T\/CDTV) (b12)<\/em> <\/p>\n AdSCSI Advantage 2000:<\/em> <\/p>\n Archos ADD-500:<\/em> T\u00e9l\u00e9charger WinUAE (Public Beta) v3.1.0 Beta 13 (4,3 Mo)<\/a><\/p>\n
\n – \u00ab\u00a0Do not force full display reset..\u00a0\u00bb update made it worse, should be better now (b12)<\/em>
\n – I finally bothered to carefully re-examine AR3 freezer behavior, emulation updated, should now match real hardware, previously unsupported features like autofire work.<\/em>
\n – If copper DMA is switched off mid-instruction, allow instruction to finish. Fixes AR2 weird copper list detection code.<\/em>
\n – Added RDB mode HD geometry GUI support. (RDB mode geometry option = what IDE Identify Device and SCSI MODE SENSE Format Parameters\/Rigid Disk Geometry returns). Very old controllers may require custom geometry.<\/em>
\n – Added HD\/CF IDE harddrive GUI option. Currently only difference is in IDE Identify Device word 0 identifier. (Cause for infamous hdtoolbox \u00ab\u00a0Unit is not a disk (Type 7)\u00a0\u00bb error)<\/em>
\n – Added GUI IDE and SCSI version selection to hardfile panel. IDE has ATA-1, ATA-2+ (old default, returns ATA-6 to allow LBA48 support and more) and ATA-2+ Strict which drops ATA-1 feature that become optional in ATA-2, triggering A600\/A1200\/A4000 IDE driver bug that causes infamous \u00ab\u00a0max transfer bug\u00a0\u00bb. (No, it isn’t drive bug) SCSI has SCSI-1 and SCSI-2 options. Currently only real difference is INQUIRY version number, some old software (like original A590\/A2091 install disk) require SCSI-1 version.<\/em>
\n – Added Archos ADD-500 emulation.<\/em>
\n – Added AdSCSI Advantage 2000 emulation.<\/em>
\n – Internal enforcer emulation hit can break to debugger, enable\/disable with ‘fen’ debugger command.<\/em>
\n – SCSI Read Defect Data command: return empty defect header instead of Defect List Not Found error. (ADD-500 driver gets confused if Read Defect Data command does not return any data)<\/em>
\n – WD33C93 SCSI devices didn’t support multiple units (b12)<\/em>
\n – Added hack that fixes max overscan scrolling in demo Seven Seas \/ Andromeda. (Demo has workaround for chipset bug that causes right edge to have a vertical gap if BPLCON1 is larger than zero. Hack is currently needed because glitch happens when hpos=0 and emulation is not designed to handle bitplane changes that cross virtual scanlines). Glitch was not emulated until few versions ago, demo worked only accidentally previously.<\/em>
\n – Added Windows 10 TP bug workaround, for some reason dialog window is visible before WM_INITDIALOG message (documentation specifically says it won’t be visible until after WM_INITDIALOG) and also dialog is set as not visible. Fixes quickly appearing and disappering empty WinUAE GUI panel each time GUI is opened.<\/em><\/p>\n
\n – 5380 based fake DMA.<\/em>
\n – First 5380 based driver that uses chip’s arbitrate bit instead of assuming AdSCSI is the only initiator.<\/em>
\n – 1.6 ROM added. (Anyone have later? At least 1.9 exists)<\/em>
\n – RDB parser is not fully compatible, does not load all filesystems (for example PFS3).<\/em><\/p>\n
\n – Yet another 5380 based fake DMA SCSI controller.<\/em>
\n – v1.21 ROM added.<\/em><\/p>\n
\nTopic Version Beta<\/a><\/p>\n