La derni\u00e8re version b\u00e9ta publique de l’excellent WinUAE, l’\u00e9mulateur Commodore Amiga.<\/p>\n
<\/p>\n
– Map only upper half of ROM image if GVP Series II ROM is 32k.<\/em> <\/p>\n Source: Forum des versions Betas<\/a>.<\/p>\n <\/p>\n T\u00e9l\u00e9charger WinUAE (Public Beta) v3.1.0 Beta 15 (4,3 Mo)<\/a><\/p>\n
\n – HD controller ROM loader duplicate code removal from HD controller specific code.<\/em>
\n – Accelerator board HD controller hardware was not added to emulation if board’s boot ROM was missing. (b12)<\/em>
\n – Added DKB 12×0 accelerator on-board RAM support. 1M and 2M size are not supported, address mapping is not completely emulated.<\/em>
\n – Floppy sound volume mixing fixed (b14).<\/em>
\n – Oktagon 2008 didn’t have autoboot disable option.<\/em>
\n – Only keep high Windows timer resolution mode active when emulation is running.<\/em>
\n – Added Seek (6) and (10) SCSI commands to HD SCSI emulator, only checks for valid LBA.<\/em>
\n – VGA modes had inverted TV\/VGA aspect ratio setting. (Probably not completely correct yet)<\/em>
\n – Added configurable blanking borders. GUI adjustment hacked to Filter panel, \u00ab\u00a0Overscan blanking\u00a0\u00bb setting. When \u00ab\u00a0Overscan blanking\u00a0\u00bb is selected, filter mode is always none. First slider adjusts horizontal start, second = horizontal end, third = vertical start, fourth = vertical end. Values are always in superhires (horizontal) and interlaced (vertical) coordinates. Zero = disabled. Currently display is only updated with new values after returning to emulation and GUI text elements are not changed.<\/em><\/p>\n