D\u00e9velopp\u00e9 par Mike Wynne, il s’agit d’un \u00e9mulateur Sinclair ZX81, Sinclair ZX80, Sinclair ZX Spectrum 16k\/48k, Sinclair ZX Spectrum 128k, Amstrad\/Sinclair Spectrum +2, Amstrad\/Sinclair Spectrum +2a, Amstrad\/Sinclair Spectrum +3, Timex TS1000, Timex TS1500, Timex TS2068, Timex TC2048, Lambda 8300, Ringo R470, MicroDigital TK85 et Jupiter ACE.<\/p>\n
<\/p>\n
\n* Bug fixes:
\n– The Flash Load mechanism would not load certain programs, e.g. Software Farm’s Bouncing Bert.
\n– The ZXpand \u201cread only file\u201d problem where the ROM shadow is disabled after loading.
\n– The vertical scrollbar shown in the History window was too far over and so was only partially
\nvisible.
\n– Changed how the ZXpand ROM overlay works, which fixing a few problems with demos.
\n– Locks the positions of the \u201cPrevious\/Next Change\u201d buttons within the status bar of the
\nMemory window when resizing the window using the grip control.
\n– Now correctly displays the address in the Memory window when in ‘Word’ view mode.
\n– The tape block to wav file conversion did not always occur correctly.
\n– Changed the number of T-states assumed per frame for the ZX81 and ZX80.
\n– File default extension was sometimes .P instead of .O when saving in ZX80 mode.
\n– Greys out the I\/O area and Display Generation T-States count within the Debug window while
\nfree running.
\n– The ZX Interface 1 RS232 baud rate is now calculated based on machine clock rate rather than
\nhard-coded to 3.5MHz.
\n– Fixed the alignment of Spectrum characters shown in the Memory window when in ‘Traditional’
\nview mode.
\n
\n* Enhancements:
\n– ZXpand banner text changed to \u00ab\u00a0ZXPAND EO x.y\u00a0\u00bb to avoid user confusion with the real hardware
\nversion number.
\n– T81 format enhanced to tolerate new block types, specifically the block introduced by the
\n81-libretro emulator.
\n– Inclusion of edition 1 ZX81 ROM.
\n– Included support for the ZX81 edition 1 ROM floating point hardware fix.
\n– The disassembler now handles instructions above $8000 on a ZX80\/81 where bit 6 of the opcode
\nis set.
\n– Improved the performance of the History capture feature under the Debug window.
\n– Increased history storage to 3000 instructions (was 2000).
\n– The History window is now refreshed when it gets resized by the user.
\n– Added Clear and Reload options to the History window.
\n– Memory edits are no longer allowed while the debugger is in free running mode.
\n– The Memory window now refreshes after an edit is made.
\n– The Memory window now displays offset numbers as column headings.
\n– The Memory window now displays the address in the status bar when hovering the mouse cursor
\nover the Sinclair characters when in ‘Traditional’ view mode.
\n– The Memory and Symbol buttons in the Debug window now toggle the visibility of their
\nrespective windows.
\n– The scrolling mechanism of the Memory window has been enhanced to provide more logical
\nbehaviour.
\n– The Tape Manager used to insert a description block with text \u201cCreated with EightyOneTZX\u201d.
\nThis has been changed to \u201cCreated using the EightyOne emulator\u201d.
\n– Added a feature to the Debug window to allow the user to specify the number of T-states that
\nare expected to have elapsed between consecutive hits of a specified address, useful for
\nverifying timing of flicker-free ZX80 programs.
\n– Warn users when file\/memory\/snap load\/save fails.
\n– Default position of all windows set to be within typical monitor bounds.
\n– Added ‘Gather Windows’ option to View menu to reposition all dialogs to ensure they appear
\nwithin the monitor bounds.
\n– Added ‘Enable Splash Screen’ option to the View menu.
\n– SoundOutput visible status now saved in configuration file.<\/em><\/p>\n