![\"nopsx\"](\"https:\/\/www.emu-france.com\/wp-content\/uploads\/2014\/05\/nopsx.jpg\")
<\/a><\/p>\n<\/p>\n
Changements :<\/strong><\/p>\n – help: added PAL\/NTSC Color Mods chapter (with info for older and newer boards) T\u00e9l\u00e9charger No$PSX (Debug version) v2.2 (1.0 Mo)<\/a><\/p> T\u00e9l\u00e9charger No$PSX (Gaming version) v2.2 (187 Ko)<\/a><\/p><\/p>\n
\n– help: namco lightgun added U1 chip pinout & link to schematic (thanks nicolas)
\n– help: namco lightgun added U2 chip part number (BA7071F aka sync separator)
\n– help: scph-1150 notes: need delay, no rumble cfg cmds, different motor ctrl
\n– help: scph-1150 notes: field of motion 00,00-FF,FF (unlike scph-1200\/scph-110)
\n– help: added\/updated chipset\/pinouts for scph-1150,scph-1180,scph-1200,scph-110
\n– emu\/reset\/init: forces [104Ah].bit6-style joypad reset (needed for deathball)
\n– bios clone: bugfixed chdir and findfirst functions (needed for deathball)
\n– bios clone: workaround on edge-triggered cdrom irqs (needed for deathball)
\n– bios clone: re-ordered cdrom cmd=setloc vs task=setloc (more reliable timing)
\n– bios clone: forces param fifo clearing (after unsupported vcd\/secret cmds)
\n– bios clone: implemented screen centering option (formerly wasn’t functional)
\n– xplorer\/help: lots of info on Xplorer db25 protocol, memory map, chipset, etc
\n– datel\/help: some more details on Datel db25 protocol, memory map, chipset, etc
\n– xplorer\/datel\/help: added FLASH commands, chip IDs, board detection, etc.
\n– help: chipless modchips chapter, with circuits\/pinouts for pu-7 thru pm-41(2)
\n– spu\/emu: allows reverb-output with DISABLED reverb-writes (raw pcm playback)
\n– spu\/emu: supports MUTE flag from SPUCNT (mutes SPU audio, and also VCD audio)
\n– cdrom\/help: caution Unsupported GetQ,VCD,SecretUnlock do need clr param fifo
\n– bios-clone: forces clearing param fifo (after SecretUnlock and VCD detection)
\n– bios clone: increased joypad-slot-select-delay (needed for SCPH-1150)
\n– bios clone: added video cd VCD software player (monochrome 10fps, 11kHz mono)
\n– bios clone: uses compression for GUI and VCD player (for 128Kbyte expansion)
\n– bios clone: uses tighter flush cache code (with loop instead of unrolled loop)
\n– cdrom loader: fixed crash upon newer .nrg files (those with \u00ab\u00a0CUEX\u00a0\u00bb chunks)
\n– vcd\/help: specs for VCD format (iso, mpeg, mp2) (still lacks lowlevel details)
\n– vcd\/help: added pinout and component list for scph-5903 (video cd console)
\n– mdec\/help: q_scale=0 disables zagzig (can be useful for raw YUV-to-RGB)
\n– mdec\/help: added note on EOB not being required after full blocks
\n– mdec\/emu: reproduces zagzig-disable, and eob being not required on full blocks
\n– gpu\/help: added GPU Versions chapter (all known old 160-pin gpu differences)
\n– card\/help: updated Memory Card Notes (vmem, yaroze, compression, etc.)
\n– cdrom\/help: added description for \u00ab\u00a0cu2\/bin files\u00a0\u00bb (psio cdrom-image format)
\n– gui: fixed window positions\/fullscr when taskbar at upper\/left (thanx joseph)
\n– mips\/mem: emulates main ram waitstates for unaligned mem (lwl\/swl\/lwr\/swr)
\n– expansion\/kernel: added installer functions in menu, utility, remote access
\n– expansion\/kernel: new nocash bios clone version for xplorer and datel carts
\n– expansion\/emu: prevents flash commands to destroy memory at 2AAAh\/5555h
\n– xplorer: supports Xplorer on 80×86 side (for PC parallel port to PSX) (xboo)
\n– xplorer: supports Xplorer on MIPS side (in expansion version of bios clone)
\n– gpu\/help: added pinouts for old 160-pin GPU, dual-ported VRAM, and RGB chips
\n– poc\/help: added details on garbage_byte for memory areas without ldrb support
\n– poc\/help: memory access times for ram\/flash arm\/thumb opcode\/data reads
\n– poc\/help: when rtc paused: rtc irq fires at 4096Hz (instead 1Hz)
\n– bios\/mem: dynamically allocates psx bios (allows sizes bigger than 512Kbyte)
\n– mips\/cop: somewhat emulates breakflags in bit0\/bit1 of DCIC cop0r7 register
\n– snapshot: faster compression (omits large zerofilled areas from look-up-tree)
\n– gpu: fixed crash on NTSC-auto-center in .INI file (pic.ysiz=0) (thanx ricardo)
\n– help: added info on joy_mode.bit8 being clk polarity (thanx charles macdonald) <\/em><\/p>\n
\n