[Ordi.] WinUAE v6.0.2

Posté le 22/12/2025 à 19:13 par Jets

Nouvelle version de cet émulateur d’Amiga dont voici les améliorations:

6.0.x bugs fixed
– Custom chipset emulation fixes.
– Status bar Power and DFx: offset when selecting with a mouse click.
– Add Harddrive didn’t always mount the drive at boot even if it was selected.
– Restoring statefile with active blitter may not have restored blitter state correctly.
– Horizontal offset that follows mouse cursor in some chipset modes and it was possible to have – graphics garbage near left and right borders.
– Horizontal centering positioning in programmed/scandoubled modes.
– Lightpen fixes (For example blank screen or trails in some configurations)
– Native/RTG autoswitch didn’t default to enabled.
– A2024 and other display port adapters work again.
– S3 Virge PCI was broken.
– Fixed AVI Output wrong colors, possible vertical jitter and possible crashes.
– WASAPI sound driver supported mode/channel/frequency enumaration stopped early with some sound drivers resulting in no sound.
– Random guru at bootup with JIT enabled.
– Autoresolution + NTSC (possibly also in some other display modes) switched between lores and hires continuously.
– On the fly switching to 68000/010 cycle-exact from any other mode caused CPU to run too slow.
– Multiple crash fixes.

Other bug fixes
– Fixed bad drive click code, sound buffer size affected click sound quality.
– Fixed stuck left ALT when using ALT-TAB and Misc panel when active and mouse uncaptured = pause emulation.
– Fixed harddrive imager GUI getting stuck at the end of imaging process.
– D3D11 fullscreen mode active, enter GUI, switch screen mode to windowed or full-window, press – Reset button: GUI closed, emulation screen was not restored.
– External HRTMon ROM images were not accepted.
– Gameports remap window didn’t always list all mapped input events, mapping analog stick to digital joystick movement now always selects digital event target ([-][+] at the end of event name).
– If A2090 or Mast FireBall hardfile is added, RDB mode was not fully activated automatically.

New features
– Added “Always stretch NTSC mode” checkbox to Filter panel.
– Added “Override initial native chipset display” to RTG panel.
– Filter panel position and size numeric text boxes added and increased manual mode positioning range.
– If 680×0 CPU is stopped with IPL mask 7 (CPU can only wake up with NMI or reset), CPU OSD shows CPU as stopped.
– Added Processor slot RAM setting to main memory GUI. This RAM type is much more common in real world than Z3 RAM.
– If any GUI text box is selected, ESC will only unfocus the text box instead of exiting the GUI.
– Using GUI to increase Chip RAM size and emulation has not yet been started and OCS Agnus is selected: set Agnus model to ECS.
– RDB/OFS/FFS hardfile creation option is now separated to RDB and OFS/FFS. RDB adds RDSK identifier to new hardfile and enables Full drive/RDB mode automatically.
– Added 3.2.3 KS ROM checksums.