SSE pour « Steven Seagal Edition » est un émulateur d’Atari ST basé sur le STeem original v3.2 de 2004. Il emprunte également des améliorations en provenance de Hatari.

 

 

Les améliorations sont les suivantes :
 

v3.9.4 Features
– Dongles: Jeanne d’Arc (French).
– A DirectDraw build of the Boiler is now available.
– Notice:
Option ‘Alt YM2149 emu’ (MAME-like PSG emulation) moved to sound page.
Option ‘Machine/Wake-up’ is now persistent (and the default is STE
demo-friendly as requested).
 
v3.9.4 Emulation improvements
– CPU: STOP timing and behaviour (Audio Sculpture, thx ijor, npomarede and
troed).
 
v3.9.4 Bugfixes / Refactoring
– Can recover from a BLIT ERROR and from 6301 crash in some cases.
– Video rendering of STE hscroll with normal borders (We Were « distorter »).
– Sound: STE DMA sound in 16bit mono.
Pro Sound Designer in 16bit (Wings of Death, Lethal XCess STF).
– CPU: RTE check new PC for crashes.
BTST timing (Phaleon/Chaotic Motion Interferer).
– GLUE: Timer B in shift mode 0 or 1 on a monochrome display (Audio
Sculpture).
No left border and no-prefetch hscroll (Hard as Ice)
– FDC: Only type 1 commands can be changed while the drive is spinning up
(Froggies Over The Fence).
Run commands even if current drive isn’t connected (Audio
Sculpture STF).
– WD1772: Negate motor line on reset (Audio Sculpture SCP – undoubtly the star
program of this release if you see all the fixes it caused).
Reload first rev at first opportunity (Turrican SCP 2 revs).
– MFP: Reading a timer when it just looped (Froggies Over The Fence back to
menu after disk 2).
Make MFP timer latency one cycle longer (Sadeness on STF WU1).
– 6301: Mouse movement in high resolution and when the ST is much accelerated.
Option C1 compatible with non-English keyboards and key combinations.

 

Télécharger Steem SSE (D3D) [32 bits] v4.2.1 R3 (6.8 Mo)

Télécharger Steem SSE (D3D) [64 Bits] v4.2.1 R3 (7.6 Mo)

Site Officiel

En savoir plus…

Voici les derniers émulateurs (et aussi les plus fréquemment mis à jour) en cours de développements.
 

 
VDosplus: Emulateur de DOS.

Citra: Emulateur de 3DS.

Decaf: Emulateur de WiiU.

RPCS3: Emulateur de Playstation 3.

Redream: Emulateur de Sega Dreamcast.

CXBX: Emulateur de Microsoft X-Box.

Xenia: Emulateur de Microsoft X-Box 360.

Cen64: Emulateur de Nintendo 64 Préliminaire.

 

Télécharger vDosPlus (2018/03/01) (1.8 Mo)

Télécharger Citra (Final build) (2024/03/07) (140 Mo)

Télécharger Decaf-Emu Build 231109 (40.8 Mo)

Télécharger RPCS3 (WIP) v0.0.43 Alpha (2026/11/18) (35.6 Mo)

Télécharger Redream v1.5.0.1239 (3.1 Mo)

Télécharger Xenia v1.0.2844 (2026/11/18) (3.9 Mo)

Télécharger CXBX Reloaded v0.1.0 (1.3 Mo)

Télécharger Cen64 (WIP) (2022/10/02) (2.6 Mo)

Télécharger Cen64 (Debugger) r2015.01.18 + (DEV) r2017.04.23 (3.4 Mo)

Des nouvelles versions des samples sont disponibles chez Antopisa et également sur notre miroir.
 

 

Site Officiel

En savoir plus…

AmiArcadia est le port amélioré de Tunix2001 ex ‘Win Arcadia 2001’ (par Gavin Turner) pour Amiga. Ecrit par James Jacobs et Gavin Turner, cette version est en fait le port Windows du port Amiga (un backport) !
 

 

Il émule les consoles basé sur la famille des Arcadia2001 : Bandai, Emerson, Grandstand, Hanimex, Intervision, Leisure-Vision, Leonardo, MPT-03, Ormatu, Palladium, Poppy, Robdajet, Rowtron, Tele-Fever, Tempest, Tryom, Tunix, etc.
 
Il supporte aussi l’Interton VC 4000 et l’Elektor TV Games Computer. Il nécessite Windows 9x/ME/NT/2000/XP et tourne aussi sous Vista/8/10.
 

Télécharger Win Arcadia (Ami Arcadia) v36.8 (9.9 Mo)

Site Officiel

Un joli frontend pour Mame (ou autres), très configurable. Emu Loader est une interface graphique qui se greffe principalement sur les émulateurs Arcade comme MAME, SEGA Model 2, SuperModel ou Daphne. Emuloader permet de gérer votre collection de roms, de vérifier vos jeux et de lancer vos émulateurs.

 

el

 

Télécharger EmuLoader v8.3.3 (9,2 Mo)

Site Officiel

En savoir plus…

Très performant, PPSSPP est un émulateur de Sony PSP (pour Windows, Android et autres via SDL) gratuit et libre écrit en C + + par Henrik Rydgard (très connu sous le pseudo de Ector, déjà auteur de l’émulateur de PSP Potemkin et surtout connu pour Dolphin, ayant également exercé sur nombre d’émulateurs Dreamcast).
 
ppsspp
 
Les changements sont les suivants:
 
– Full Vulkan support, also for Android now. Very fast on supported devices. (#10033, #10049)
– Smarter graphics state management, reduced CPU consumption on all backends (#9899)
– Android: Support for Arabic and other scripts we couldn’t support before
– Fix Android widgets, screen scaling (#10145)
– Fixes to video dumping
– Geometry problems fixed in Medal of Honor
– Implement immediate draws, fixing Thrillville (#7459) – Software rendering improvements, speed and accuracy
– Hardware tesselation of PSP Beziers and Splines (used by a few games)
– Partial sceUsbGps and sceUsbCam support (Android)
– Android « Sustained performance mode » to avoid thermal throttling (#9901)
– Linux controller mapping fixes (#9997)
– Assorted bugfixes and compatibility improvements

 
Merci à Zet-sensei pour la news !

 

Télécharger PPSSPP v1.20.4 (19.4 Mo)

Site Officiel

En savoir plus…

QMC2 – M.A.M.E. est une interface graphique pour l’émulateur de jeux d’arcade M.A.M.E. Il est le successeur d’une des premières interfaces graphiques UNIX pour M.A.M.E. : QMamecat, et est aujourd’hui le projet le plus actif dans le domaine. QMC2 repose sur l’utilisation de la bibliothèque graphique Qt4.

 

qmc2
 
Changements :
– fix: corrected build issues when using Qt 5.9.x (BT #157)
– fix: software-lists: repeat the last search when the software-list is reloaded and a non-empty search pattern is present (BT #158)
– fix: software-lists: corrected statistics string to also include the number of search matches (S:) when state-checking is disabled
– fix: welcome dialog: explicitly set the GUI font if it has been customized before
– fix: welcome dialog: fixed reverting to the current language setting when the dialog is reject()’ed (i.e. Cancel is clicked or Escape is pressed)
– fix: video player: avoid some of the possible race conditions related to switching machines quickly while the attached videos list is being created
– fix: video player: do not request video image data from YouTube again when the image is already cached, and don’t request anything for local videos (oops)
– fix: avoid updating detail-tabs while the tab-widget itself is being recreated (BT #160)
– fix: worked around a Qt bug to fix initial detail-tab header scrolling when the current tab is far to the right (BT #161)
– fix: video player: avoid loading the video info map multiple times
– fix: video overlay widget: don’t display status messages when the main GUI is minimized (as the overlay is actually a parentless window it’s not receiving the “minimize event” implicitly)
– fix: avoid UI flicker when initially showing the loading animation with active category- or version-view
– fix: example system-notes template: when on Windows, provide a play/pause button alternative for controlling the HTML5 video canvas as the built-in controls don’t work
– imp: ignore the new dtd emulator option when checking the template map
– imp: MinGW builds: changed the Makefile to support the newer MAME-dev tools, including Qt 5, but Qt 4 is still recommended (note that for Qt 5 /usr/bin/sh.exe must be renamed or removed, otherwise qmake won’t produce correct paths – see QTBUG-48876 which unfortunately isn’t fixed but closed)
– imp: updated category.ini to MAME 0.192
– imp: obsolete (or invalid) emulator options are now automatically removed when the options are stored
– imp: video player: greatly improved the way the widget is reloaded upon changing the current system
– imp: replaced the ghost video thumbnail with a more neutral image to avoid misinterpretation (also renamed the corresponding notes-template macro from $GHOST_VIDEO$ to $VIDEO_THUMBNAIL$)
– imp: revised or replaced several icons
– imp: example system notes template: removed the “opacity fade in” feature from the fancy image style (CSS) as it takes a duration of 1s that may cause issues if systems are switched very quickly
– imp: added a key-event filter for the search boxes in order to disable their default handling of Up / Down key input (because this causes issues with the way QMC2 uses the drop-down list as a search history)
– new: finalized the advanced setup wizard (started in 0.186) and promoted it to non-WIP
– new: notes-templates: added a new JavaScript-accessible funtion to query the current operating system name (see wiki)
– wip: adding freely customizable filtered machine list views (consumers of the machine list database added in 0.66, aka custom views) that can optionally be attached to the UI
– doc: added a note about escaping special characters to both the software-search’s tool-tip and the QMC2 guide (BT #153)

 

Télécharger QMC2 (x86) v0.195 (patched v0.217+) (32.5 Mo)

Télécharger QMC2 (x64) v0.243 (48.9 Mo)

Site Officiel

En savoir plus…

Un excellent émulateur Nintendo NES pour windows et linux.

 


 
– I had forgotten in release v0.101 to add support for NSF and UNIF files in compressed archives.
 
Un pack de shaders est disponible ici.
 

Télécharger puNES OpenGL (x86) v0.111 (21.7 Mo)

Télécharger puNES OpenGL (x64) v0.111 (23.9 Mo)

Télécharger puNES D3D9 (x86) v0.111 (21.8 Mo)

Télécharger puNES D3D9 (x64) v0.111 (24.1 Mo)

Site Officiel

En savoir plus…

GroovyMAME est un émulateur multi-systèmes basé sur MAME (Arcade + Consoles + Ordinateurs) et qui se focalise sur le rendu sur écran CRT (Moniteur de PC ou d’arcade avec fréquence particulière) car les auteurs sont convaincus que la technologie CRT est un must quand il s’agit de profiter de l’émulation dans toute sa splendeur. Cependant GroovyMAME peut être utilisé également sur écran LCD (principalement sur les modèles qui permettent un rafraîchissant à des taux personnalisés).
 

 

Beaucoup d’améliorations provenant de Groovy avaient été intégrées dans MAME il y a quelques temps rendant Groovy obsolète, mais depuis de nouvelles fonctions ont été développées en parallèles justifiant ces nouveaux builds.

 

A noter que des LiveCD sont également disponibles sur le site officiel.
 

 
Note sur la version D3D9EX:
Cette version intègre un patch Direct3D9Ex (également connu sous le nom de Direct3D 9.0L ou 9.L, le L faisant référence à Longhorn, nom de la base de code de Windows Vista) qui permet de bénéficier de certaines fonctionnalités introduites par l’utilisation des drivers WDDM tout en maintenant la compatibilité avec les applications écrites pour Direct3D 9. L’interface Windows Aero s’appuie sur D3D 9Ex et utilise certaines des fonctionnalités non présentes dans Direct3D 9 comme la possibilité de partager des surfaces DirectX entre plusieurs processus.

 
Les fichiers sont compilés par notre ami Lo, merci à lui comme d’hab 😉

 

Télécharger GroovyMAME (x86) v0.227 SwitchRes v0.017t (56.4 Mo)

Télécharger GroovyMAME (x64) v0.227 SwitchRes v0.017t (58.1 Mo)

Télécharger GroovyMAME D3D9Ex (x86) v0.227 SwitchRes v0.017t (56.4 Mo)

Télécharger GroovyMAME D3D9Ex (x64) v0.289 SwitchRes 2.22f (98.5 Mo)

Site Officiel

En savoir plus…

MAME(Arcade), partie arcade de MAME, est un émulateur multi-arcade émulant plus de 31000 jeux (à partir de 1975). Les deux builds sont compilés par moi-même.
 

 

Télécharger MAME(Arcade) [32 bits] v0.289 (75.2 Mo)

Télécharger MAME(Arcade) [64 bits] v0.289 (71.9 Mo)

Site Officiel

En savoir plus…

Ces fichiers ini concernant la partie arcade de MAME sont à mettre dans le répertoire « folders » de MAMEUI (ou clones). Il propose un tri des jeux par catégorie, année de sortie, version de MAME…
 

Télécharger MAMEUI Inifiles pack v0.289 (1.0 Mo)

Site Officiel

En savoir plus…

Il s’agit d’un fichier DAT tenu par MASH regroupant toutes les infos du site « mametesters.com ». Il donne des infos sur l’émulation des jeux sous MAME(Arcade), c’est a dire le développement, les bugs, les améliorations…
 

Télécharger MAMEinfo.dat v0.289 (3.8 Mo)

Site Officiel

En savoir plus…





https://getourbonus.com/fr/accueil

https://www.romspedia.com/