La dernière version béta publique de l’excellent WinUAE, l’émulateur Commodore Amiga.

 

– Emulated sprite undocumented special case, sprite start hpos from 2 to 9 will be visible at the very far right overscan border of display.
– WinPCap network mode didn’t detect any devices (broken some time ago)
– ROM type configuration for expansion sub devices. SupraDrive A2000 DMA does not anymore list incompatible AMABx ROMs. (A2000 DMA model ROM is still MIA)
– Improved SCSI/IDE controller init log messages.
– Fastlane and Z3 RAM configured: use Fastlane Z3 RAM autoconfig data.
– Handle recursive default_xlate() calls, can happen if autoconfig mapping is really bad.
– Accelerator with GVP Series II SCSI controller + GVP Series II SCSI expansion controller combination didn’t work.
– Accelerators that include autoconfig RAM (Only GVP A530 currently) now include matching RAM autoconfig parameter data.
– WASAPI audio init may have caused crash if some WASAPI query functions returned error code.
– Implemented support framework for PCI bridges.
– dm debugger command shows PCI bridges and PCI boards.
– Added DKB Wildfire accelerator board.
– Check and halt if any illegal autoconfig remap is done. (Instead of causing pointless reset loop)
– Added support for ECS Denise genlock features. (Did any program ever use ECS genlock features?)
– Expansions boards without ROM now have simple enable/disable checkbox.
– PCI Realtek 8029 added from QEMU (NE2000 clone), automatically connected to any enabled PCI bridge.
– Moved accelerator and expansion board GUI items to new Expansions panel. Old Expansion panel is now RTG settings only panel.
– More 68030 data cache emulation fixes.
– Added generic SASI (SCSI predecessor) controller emulation and SASI HD GUI selection.
– Added Tecmar T-Card/T-Disk expansion/SASI HD controller.
– Added Xebec 9720H HD controller.
– Audio period modulation with zero period value stopped modulated channel.
– Blizzard 1230IV default ROM was incorrect.
– If no physical/virtual CD drives available and image drive was not manually selected: automatically select empty image drive. Previously emulated drive was removed.
– Blizzard SCSI Kit IV configuration weirdness fixed, old config is not compatible anymore.
– SSE2 capable CPU is now required.
– If you use WINE, 1.7.44 or newer required.
– Files are now 7zip compressed.

 

New Most Pointless Feature Ever:
– Genlock emulation can now replace transparent pixels with noise pattern or static image.
– Implements also ECS new genlock features (I still think there is no software that uses them..)
– Transparency control.

 

DKB Wildfire:
– Interesting design, SCSI and ethernet chips are connected to internal PCI bus that boot ROM initializes. (Reason why PCI bridge emulation had to exist first. This actually was the original trigger for PCI bridge emulation implementation, simple, extremely easy to do tests, only needed to start emulation and results were visible in 1 second!)
– SCSI is emulated, uses same QEMU 53c895 emulation as CSPPC.
– Ethernet is not emulated.
– Boot ROM is stored in 2*32k parallel EEPROM chips. Wildfire flash update program supported but but modified data is not saved back to rom image file.
– ROM image is from install disk.
– Boot menu (keep right mouse button pressed while booting) options are not yet saved to file, it looks like it is saved to 3rd(!) Flash/EEPROM chip via 53C815 built-in ROM support circuitry. High resolution image of the board is needed.
– Board config space ($ffff0000) bits are not emulated, except 68000 mode which only halts the emulation.

 

PCI bridges:
– Wildfire with 53C815 chip connected to first internal PCI slot.
– Prometheus.
– G-REX. NOTE: only supported by latest 44.71 CSPPC/BPPC boot ROM.
– Mediator 1200TX and 4000MK2. (If you have other model, please contact me)
– Only 53C815 (Wildfire only) and Realtek 8029 PCI devices implemented so far.

 

Try not to ask non-emulation related PCI bridge questions (like which driver to use, where to find them, how to install them, how to configure 8029 driver and so on..), thanks.

 

Tecmar T-Card/T-Disk:
– The very first Amiga harddrive controller.
– No autoboot, no automount, no RDB.
– KS 1.0 and 1.1 compatible, possibly also earlier version. Not KS 1.2+ compatible.
– SASI controller, make sure SASI drive type is selected.
– Implements old style autoconfig that was documented in first HRM revision, Appendix_G, Disk based autoconfig driver (« xbus.resource »). Not compatible with KS 1.2+ ROM based expansion.device. Possibly the only released hardware with old style autoconfig.
– Memory board emulated (Use second fast ram slider, autoconfig must be disabled).
– Clock emulated.

 

Xebec 9720H:
– Another very early Amiga harddrive controller.
– No autoboot, no automount, no RDB, SASI.
– Not autoconfig, hardwired at $600000.
– 5380 based, on-board 16k SRAM, 5380<>SRAM DMA. SRAM<>CPU PIO.

 

Source: Forum des versions Betas.

Télécharger WinUAE (Public Beta) v3.2.0 Beta 1 fix (3,0 Mo)

Site Officiel

En savoir plus…

Ce fichier 7z (contenant des fichiers XML) vous permettra de tricher dans vos jeux préférés. Il s’active via la touche TAB sous MAME (Arcade + consoles + ordinateurs).

 

Les cheats de la partie MESS sont inclus mais ne fonctionnent pas tous correctement.

 

Quite a big change this time as MESS cheats are now included, had to do some rewrites to my tool chain and fix MAME so that all cheats can be in a single 7z file without causing problems.

I’ve now rolled the MESS files I’d previously released and some of my other MESS WIP into this release, sadly ROM cheats still don’t work in the former MESS softwarelist games so many cheats will not work as advertised. So please don’t report any problems with softwarelist games to this issue with slot ROM overwriting has been addressed.

 

Décompressez l’archive (.zip) de manière à obtenir un fichier cheat.7z (qui en revanche n’est pas à décompresser) et que vous placerez dans le répertoire courant de Mame puis modifier le fichier ini de l’émulateur (fichier qui se créait en lançant la ligne de commande mame.exe -cc) et changer la ligne: « cheat 0 » en « cheat 1 ».

 

Télécharger Pugsy Cheat v0.163 (1,3 Mo)

Site Officiel

En savoir plus…

bsnes-plus (ou bsnes+) est un fork de bsnes (basé sur bsnes-classic) destiné à introduire de nouvelles fonctionnalités et améliorations, la plupart visant au débogage. Il s’agit donc d’une version améliorée de bsnes 073 ou l’on retrouve donc l’ancienne interface ainsi que les anciens menus.

 

Quelques caractéristiques:

 

– « Step over » and « step out » buttons in debugger
– Improved debugger UI with register editing
– Improved handling of address mirroring for breakpoints (extends to the entire address space, not just RAM)
– Real-time code and data highlighting in memory editor, with fast searching for known code/data locations and unexplored regions
– Cartridge ROM and RAM views in memory editor for mapper-agnostic analysis
– SA-1 disassembly and debugging
– SA-1 bus and BW-RAM viewing and (partial) usage logging
– Super FX disassembly and debugging
– Super FX bus viewing and usage logging
– SPC file dumping
– IPS and BPS soft patching
– Multiple emulation improvements backported from bsnes/higan (mostly via bsnes-classic)

 

Cette version est compatible avec le pack de shaders disponible ici.

 

Télécharger bsnes-plus v073+1 (2015/06/26) (5,0 Mo)

Site Officiel

En savoir plus…

Un « autre » émulateur de NES, tout simplement ! Yanese supporte les mappers UNROM, CNROM, MMC1, MMC3, AOROM, BxROM, # 226, # 187, # 58 & MMC2.

 

  • Video: Added 4:3 aspect ratio support in full screen mode. You can change of common 3 resolution you want to be displayed. This is more likely playing in a real TV.
  • App video crash: I tested the emu in some basic GPUs like Intel ones. It was sometimes crashing in this GPUs. I discovered that changing some compiler settings was the error.
  • APU: Fixed Triangle Channel problem that some games didn’t sound fine.
  • SOUND: Added a « low pass filter » in sound generation. It sounds « better » not « too much better », but as i said a « little better ».
  • SOUND: Setting volume too high sometimes, in some games caused the sound to cut off.
  • Improved some code.

 

Télécharger Yanese (x86) v0.77 (424,5 Ko)

Télécharger Yanese (x64) v0.89 (490 Ko)

Site Officiel

En savoir plus…

MAME Plus! Plus Kaillera permet de jouer en ligne sur l’ensemble des titres supportés par Mame Plus.

 

Site source n°1 (ancien). Site source n°2. Site source n°3. Site source n°4.

Télécharger MAME Plus! Plus Kaillera (x86) v0.163 r258 (29,1 Mo)

Télécharger MAME Plus! Plus Kaillera (x64) v0.164 r259 (28.6 Mo)

Site Officiel

En savoir plus…

Egalement disponible sous Linux, Xpeccy est un excellent et complet émulateur de Sinclair Zx Spectrum dont voici les nombreuses fonctionnalités.

 

Forum alternatif

xpeccy

 

Télécharger Xpeccy v0.5 (2015/06/25) (1,5 Mo)

Site Officiel

En savoir plus…

Il s’agit d’un émulateur de Sega GameGear / Master System, Nintendo GameBoy / GameBoy Color écrit en Java. Le son reste perfectible et l’absence de filtres graphiques se fait sentir. (une version incluant Java est également disponible sur le site officiel).

 

EmuliciousEmulicious2

Mais outre une émulation précise, Emulicious dispose de fonctions supplémentaires :

– Mise à jour automatique
– Turbo ajustable
– Moteur ajustable
– Patching d’IPS
– Sauvegardes d’état (Master System/Game Gear uniquement)

Outils (Master System/Game Gear uniquement) :
– Debugger
– Visualisateur de palette, cartes, scripts, sprites…
– Traceur mémoire

 

Télécharger Emulicious (2015/06/26) (472.5 Ko)

Site Officiel

En savoir plus…

Il s’agit de Kawaks mais en français.

 

kawaks

 

Télécharger Kawaks (Français) v1.64 (550,0 Ko)

Site Officiel

En savoir plus…

GroovyMAME est un émulateur multi-systèmes basé sur MAME (Arcade + Consoles + Ordinateurs) et qui se focalise sur le rendu sur écran CRT (Moniteur de PC ou d’arcade avec fréquence particulière) car les auteurs sont convaincus que la technologie CRT est un must quand il s’agit de profiter de l’émulation dans toute sa splendeur. Cependant GroovyMAME peut être utilisé également sur écran LCD (principalement sur les modèles qui permettent un rafraîchissant à des taux personnalisés).

On note la disparition de GroovyMAME version arcade, et le renommage de GroovyUME en GroovyMAME.

 

A noter que des LiveCD sont également disponibles sur le site officiel.

 

Télécharger GroovyMAME (x86) v0.163 SwitchRes v0.015h (21,2 Mo)

Télécharger GroovyMAME (x64) v0.227 SwitchRes v0.017t (58.1 Mo)

Site Officiel

En savoir plus…

A l’instar de MAMEinfo pour MAME(Arcade), le fichier MESSinfo vous permet de suivre les changements entre les versions concernant les différents systèmes émulés par ce multi-émulateurs.

 

Télécharger MESSinfo v0.163 (8.1 Mo)

Site Officiel

En savoir plus…

Il s’agit de fichiers ini destinés à MAMEUI/MESSUI et permettant de connaitre, pour chaque jeux, la version de MAME dans laquelle ils ont été ajoutés.

 

Télécharger Version.ini (Arcade) v0.163 (100,4 Ko)

Télécharger Category Inifiles pack v0.289 (1.2 Mo)

Site Officiel

En savoir plus…

Ce fichier folder pour MAMEUI vous permettra de trier vos jeux par séries. Il est bien sûr à mettre dans le sous-répertoire Folders de MAME(Arcade).

 

Télécharger Series.ini v0.163 (31,3 Ko)

Site Officiel

En savoir plus…





https://getourbonus.com/fr/accueil

https://www.romspedia.com/