Un complément pour le cheat.7z (XML) de Pugsy (et qui ne sert que pour la partie arcade de MAME), à utiliser en plus du fichier original.
 
– Décompressez l’archive de manière à obtenir un fichier cheat_wayder.7z (qui lui n’est pas à décompresser).
– Placez-le dans le répertoire courant de Mame.
– Enfin, ajouter une référence dans le fichier de configuration de MAME :
 
Remplacez la ligne : ‘cheatpath cheat’ par ‘cheatpath cheat;cheat_wayder;cheat_wayder_omake’

 

Télécharger Wayder Cheat v0.187 (200,5 Ko)

Site Officiel

En savoir plus…

Ce fichier est créé par cnterr (voir ici et là) et basé sur celui de Fabricio en 2009, il vous permet de connaitre les mouvements à effectuer dans les jeux de bastons notamment. Il est basé sur le command.dat original de Procyon (créé à l’origine par Emuman et grandement amélioré par Whack). Actuellement maintenu (de nouveau) par Fabricio et Antopisa.

 

Shorthand vs. Longhand

Shorthand vs. Longhand

 
Ce fichier fait office de fichier WIP entre deux releases d’un command.dat officiel et ne servira que pour la partie arcade de MAME.
 
On le trouve sur le site non officiel d’Antopisa.
 

Télécharger Command.dat (non officiel) v0.187 (01/07/2017) (1,8 Mo)

Site Officiel

En savoir plus…

Il s’agit d’un fichier permettant à MAME/MAMEUI de connaître la procédure à suivre pour l’initialisation d’un jeu.

 

gameinit

 

Télécharger GameInit.dat v0.187 (40,2 Ko)

Site Officiel

En savoir plus…

Voici un éditeur de mémoire pour Zelda BOTW tournant évidemment sous l’émulateur de WiiU nommé Cemu. Nul doute que toutes ces améliorations finiront par être intégrées un jour dans l’émulateur mais en attendant…
 

 
– Updated offsets for BoTW 1.3.0 (tested on Cemu 1.8.1b and botw EU 1.3.0 + DLC 2.0)

 
Bon jeu !

 

Télécharger Cemu BOTW Editor v2.0.0.9d (157 Ko)

Site Officiel

Créé par Exzap, il s’agit du second émulateur de Wii U à être disponible au public mais le premier à pousser jusqu’à l’émulation de jeux commerciaux. Il peut décrypter les images Wii U qui utilisent le format Wud mais également les fichiers RPS ou RPL. La résolution interne peu aller jusqu’à 1920×1080 selon les jeux. A noter que pour le moment, un seul contrôleur est accepté, il s’agit du DRC (GamePad) de la Nintendo Wii U. Cette version n’est compatible que pour les Windows x64 avec une carte graphique gérant OpenGL 4.0 ou supérieur.
(Correspondance ID-Titre).
 
Un tuto est disponible ici.
 

cemu
 
Les changements:
 

En résumé:
– Improved compatibility
– Improved graphics
– Added support for socket API (nsysnet)
– Improved Software Keyboard
– Bugfixes

 
En détails:
# New in 1.8.1b:

– general: Fixed a bug causing permanent full CPU load on one thread
 
# New in 1.8.1:

– CPU/JIT: Fixed a bug in ADDME. instruction
– CPU/Interpreter: Fixed a bug in PSQ_STX and PSQ_LDX instruction (GQR index parsed incorrectly from opcode)
– CPU/Interpreter: Fixed invalid endianness in instruction STHBRX

– coreinit: Added ‘errno’ export
– coreinit: Added API OSCalendarTimeToTicks(), OSCancelThread(), IM_GetHomeButtonParams(), OSCalendarTimeToTicks(), FSAppendFile(), FSRemove(), SAVEChangeDir()
– coreinit: Fixed GHS flock handling. Added __ghs_flock_file() and __ghs_funlock_file()
– coreinit: Added support for milliseconds and microseconds in OSTicksToCalendarTime()
– coreinit: Fixed bug where FSOpenFile() with mode ‘r+’ would not allow read access
– coreinit: Fixed a bug where shared-write file access prevented simultaneous read access from the same file

– GX2: Added API GX2GetScissorReg(), GX2GetTargetChannelMasksReg(), GX2SetDefaultState()
– GX2: Better handling for invalid/uncompilable shaders (avoid drawcalls that will lead to errors)
– GX2: Added support for vertex format 32_32_32_32_FLOAT for primitive RECTS
– GX2: MULADD shader instruction will now use correct rules in regards to 0*anything
– GX2: Fixed OpenGL error caused by games requesting more mip levels than possible for a texture
– GX2: Fixed source mip level parameter for GX2CopySurface()
– GX2: Avoid shadow samplers on AMD GPUs. This workaround can be forced on other GPUs via -amdshadows command line parameter

– SWKBD: Fixed handling of active state (previously it was tied to the keyboard being visible whereas it should be separate)
– SWKBD: Fixed input handling (should no longer clash with wxWidgets, leading to input sometimes being ignored)

– RPL: Fixed bug where imports/exports were mapped incorrectly if the internal module name included ‘.rpl’

– zlib: Overhauled Cafe OS zLib implementation

– nsysnet: Added nsysnet (socket) library
 

 
A noter que des packs graphiques haute définition sont disponibles ici. Ils permettent, entre autre, d’augmenter la résolution native des jeux car contrairement à Dolphin et parce que la machine est techniquement différente il n’est pas possible à Cemu d’augmenter la définition autrement que par cette méthode.
A l’inverse, des packs SD (définitions standards et/ou basses) sont disponibles sur ce lien et permettent à certains PC manquant de performance de lancer des jeux en 60 FPS.

 
Une liste de compatibilité est disponible ici.

 
Site source.

Télécharger Cemu v2.6 (35.6 Mo)

Site Officiel

En savoir plus…

FEEL est un front-end pour émulateurs spécialement conçus pour l’utilisation avec une MAME Cab, hautement personnalisable, idéal pour l’intégration de différents systèmes (MAME / MESS, Daphne, Fusion, zsnes, WinVice et beaucoup d’autres).

 

L’interface utilisateur est conçue pour être commandée par des contrôleurs d’arcade (joystick, boutons, spinners, trackballs), de plus il est possible de cacher complètement Windows et de lancer FEEL au démarrage du système ce qui le rend parfait avec un PC dédié à l’arcade.

 

feel

 

Les changements sont visibles ici.

 

Télécharger FEEL v1.9.8.1c (26,7 Mo)

Site Officiel

En savoir plus…

Il s’agit d’un émulateur de NEC PC-9801 qui supporte également le NEC PC-9821.

 

neko

 

Télécharger Neko Project 21 v0.86 Rev. 33 (4,2 Mo)

Site Officiel

En savoir plus…

Créé par Andrew Peterson, N3S (ou NesVoxelD3D) est un émulateur de NES permettant un rendu en 3D voxel des jeux. Il enveloppe le noyau Libretro de Nestopia UE et ré-émule le PPU pour dessiner des maillages 3D prédéfinis en lieu et place des sprites en 2D.
 

 

New Features:

  • Editor added.
    • You can currently switch between game and editor with ; (semicolon) and ‘ (single quote) keys, respectively.
    • You can read more about workflow and scene / voxel editor here: http://n3s.io/index.php?title=Editing_N3S_Files
    • Editor is not feature-complete, and N3S file format is subject to change in coming versions. I wouldn’t recommend seriously tackling converting a game to 3D yet as it may become incompatible.
    • Editor controls are currently hardcoded and listed below.
  • Input system added
    • Can now bind multiple analog or digital inputs to various functions within the app.
    • Currently supports XInput and keyboard/mouse.
    • Bindings temporarily hard-coded, but will support remapping with config file or menu in coming versions.
  • GUI implemented, along with shader for overlay and text rendering.
  • In-app console output implemented, rarely used in current version

 
Bug fixes:

  • Fixed audio issues when moving or resizing window.

 
New issues:

  • Mesh info window in editor overlaps new buttons (VRAM, CHR pages) in scene selector GUI.
  • Buttons in palette window not always responsive.
  • Left analog stick moves camera and give NES directional input at the same time.
  • ALT key focuses Windows menu, even within editor.

 
Outstanding issues:

  • Cannot play games with no CHR data / sprite data compressed in PRG.
  • Many games still have graphical glitches.
  • PAL games run, but at 60hz rather than 50hz.
  • Audio buffer still loops when accessing application menu bar.
  • Many menu items do not do anything yet.
  • Possibly unknown issues on different versions of Windows, has only been tested on Windows 10 x64.

 



 
Site de développement.
 

Télécharger N3S v0.3.0 Alpha (16,1 Mo)

Site Officiel

En savoir plus…

SSE pour « Steven Seagal Edition » est un émulateur d’Atari ST basé sur le STeem original v3.2 de 2004. Il emprunte également des améliorations en provenance de Hatari.

 

Les améliorations sont les suivantes :
 

Features
– Can copy from the ‘readme’ texts to the clipboard.
– Can use Steem on a second monitor (D3D).
– Optional borderless window fullscreen mode for even more compatibility (D3D).
– ‘Laptop’ fullscreen mode renamed ‘Max Resolution’, now with correct aspect ratio + optional ST aspect ratio (DD).
– Sound: more sampling rates are managed, up to 384Khz. Higher rates depend on your hardware. They can reduce aliasing in some cases (Star Trek, Union Demo).
 
Emulation improvements
– Hardware Expansions: Support for MonSTer alt-RAM.
– Blitter:
*Further improvements of blit mode bus arbitration.
*Note that those improvements increase overhead while having no practical use (game, demo…), but that’s the price of more precise emulation.
*Thx Cyprian for good test programs.
– YM2149: If option’C2′ is checked, an alternative, lower level YM2149 emulation inspired by MAME is used. Thx Couriersud.
– Timings: NTSC clock for the Mega ST, PAL clock for the STF and the STE.
 
Refactoring
– Former options ‘Interpolated Scanlines’ and ‘PAL Aspect Ratio’ have been merged into a new option ‘ST Monitor’.
– MFP: Timer B tick better following the ‘DE’ signal.
*More precise timers when the CPU is accelerated (sound routines).
*Some timing changes.
– CPU: 64bit cycle timers (Win64). This makes older memory snapshots incompatible.
 
Bugfixes
– CPU timing destination = .W (-An).
– GUI crash on select MIDI in (Win64).
– DC offset: sound is now centred on zero, start/stop shouldn’t click.
Note: PSG emulation produces positive-only values, DMA sound samples are signed.
– 2.5MB memory setting was forgotten at second cold reset.
– More compatible, less trashy fullscreen GUI (DD & D3D).
– Some other Fullscreen bugs (trash, wrong size…).

 

Télécharger Steem SSE (D3D) [32 bits] v4.2.1 R3 (6.8 Mo)

Télécharger Steem SSE (D3D) [64 Bits] v4.2.1 R3 (7.6 Mo)

Site Officiel

En savoir plus…

pfeMame (écrit par Gareth Finch) est un frontend pour MAME, écrit en Python. Il est multiplateforme (testé sur Linux – Ubuntu et Windows). Il comprend également une interface graphique destinée aux MameCab qui permet le contrôle à l’aide de joystick / manette.

 

pfemame_main

 
• In Linux (not Windows), using the ENTER key to run a game caused two event to be generated for reasons that I just could not find out. I have been able to work around this by using two different methods to capture the key press for Windows and Linux.
• Removed some empty linefeeds not needed when running verifyroms
• Have included the pfeMAME manual with the distributions now and have added a submenu under Help to view it
• General tidy up of some code – spacing, grammar, python-ish correctness etc
• Corrected some override code for the ultimatelistcontrol
• Used a better method for determining if a game has an icon or not – previous method was an ugly hack
• Have added a CLEAR ALL option to the file paths window. This is more useful for development than normal use
• Have added an AUTO FIND option to the file paths window. This is very handy as it just simplifies and speeds up the process of entering all of your folders. Under Linux only looks in \usr\games\mame – if it finds a match it adds it in, otherwise it is left empty so you know a match wasn’t found
• Changed the about dialog to use the wxpython inbuilt dialog
• Changed the singlechoice dialog to use the wxpython inbuilt dialog
• Removed my own coded singlechoicedialog and aboutbox include files from the distribution build as they are no longer used
• Changed the logfile file limit size to 512k before it creates a archive copy and then a fresh logfile.log. This was done to allow me to use the scrolledmessagedialog to display the logfile – this inbuilt control has a text size limit.
• Added a view option to display the logfile. Note, it will only display the currently active logfile (limited to 512k), not any archived log files (with a .1, .2, etc extension)
• Renamed the manual to pfeMAME_manual (added the underscore). Linux couldn’t find the file due to the space causing issues with subprocess.popen.
• Fixed a bug that prevented the pfeMAME manual from being opened under Linux – the method to open a PDF file under Linux and Windows is different as under Linux you need to essentially tell the system to use a default opener.
• Updated the manual – brought it up to date and corrected spelling and punctuation etc.
• Removed all references to mameinfo.dat as it was not actually required or used anywhere but you still had to select it in the folder paths. Also removed as a prerequisite in the manual.
• When selecting a star rating for a rom, the pop-up will now set its default value based upon what the current star rating for the rom is
• Fixed a bug that caused some games to throw an error to the console when trying to get the game info from the mameinfo.dat file. This was due to non ascii characters being in the file. Have added encoding to utf8 when reading the file to solve the problem (this was done using io.open as the standard open in python 2.7 doesn’t support built in encoding on open).
• Fixed a bug whereby a slightly malformed game snapshot (PNG) would cause a long delay and then a core assertion error at console when the image was being resized for display. I have trapped the error and a message is displayed for the user so that they can track down the offending image file. The long pause still happens as it takes a while for python to realise there is an issue while it gets stuck trying to resize the image.
• Have improved the code for displaying game information – could still be faster.
• Adjustments to column widths in game list table
• Have improved the ‘first time use’ message a bit to make it more useful.

 

Télécharger pfeMame (32 bits) v3.9.2 (119 Mo)

Télécharger pfeMame (64 bits) v1.008 (12.5 Mo)

Site Officiel

En savoir plus…

Il s’agit d’un très bon émulateur Amstrad CPC (464/664/6128 et compatibles) pour Windows conçu par Thomas Guillemin. Sugarbox est agréable pour sa simplicité d’utilisation.

 
Merci à Thomas pour la news 😉
 

sugarbox1 sugarbox2

 
Les changements :
– [Gate Array] : Fix mode changing : Imperial Mahjong now looks better !
– [Expansions] : Add support for the Playcity
– [Expansions] : Add support for the Multiface II cards.
– [Z80] : Complete recoding of the Z80 core. It now use the real M and T states, and handle WAIT states correctly. More accurate.
– [General] : ZIP support (only zip file at the moment) for tape and disks
– [IPF] : IPF created is striclty equivalent to the original dump (in term of MFM track)
– [IPF] : Minor fixes in IPF reading
– [DSK] : Fix some wrong behaviour. Dsk reading should be more reliable (and will no longer crash)
– [DSK] : Fix a bug in saving DSK file. It should no longer crash (anyway, if you can avoid using it, prefer HFE or IPF format !)
– [Emulation] : All peripherals are now running in the correct timings.
– [FDC] : Index detection fixed on Sector writing (Imperial Mahjong is able to save its configuration)
– [FDC] : Dump with missing tracks will no longer crash Sugarbox
– [FDC] : Fix wrong behaviour for double sided dumps that needs flipping of disk (fix altered beast double sided CTRaw)
– [FDC] : Fix wrong status than can set « Seek end » incorrectly in some cases

 

Télécharger SugarBox v0.28 (2.3 Mo)

Site Officiel

En savoir plus…

Nouvelle version de la suite de folders d’Antopisa pour MAME/MAMEUI et/ou Frontends conforme à la dernière version de MAME en date et valable aussi bien pour MAME, les frontends ou les clones de l’émulateur.

 
BestGames.ini: Inspiré du rankings.ini, ce fichier donne une note aux jeux d’arcade qu’émule MAME. Rappelez-vous que ce sont les évaluations personnelles d’Antopisa et que cela n’est pas forcément conforme aux avis généralement admis dans les magazines.
 
CHD-Info: Dans cette archive, vous trouverez trois fichiers: « CHD-Info_vXXX.txt », avec des informations détaillées sur tous les CHDs disponible dans MAME; « CHD_diff_vXXX_vXXX.dat » qui est un dat pour managers indiquant les changements entre les deux dernières versions publiées de MAME et « MAME_CHD_vXXX.dat » qui est un dat pour managers de roms listant tous les CHDs.
 
Series.ini: Ce fichier folder pour MAMEUI vous permettra de trier vos jeux par séries. Il est bien sûr à mettre dans le sous-répertoire Folders de MAME(Arcade).
 
Languages.ini: Un fichier ini pour MAME(Arcade) qui vous dira le langage qu’utilise le jeu: Japonais, Anglais, Chinois…
 
Version.ini: Il s’agit d’un fichier ini destiné à MAMEUI (Arcade + consoles + ordinateurs) mais également à MAME (v0.171 et supérieur) et permettant de connaitre, pour chaque jeux, la version de Mame dans laquelle ils ont été ajoutés.
Le pack qui inclut le « version.ini » propose également les fichiers dédiés à MAME: Arcade.ini (Liste des jeux d’arcade), Arcade_NOBIOS.ini (Liste des jeux d’arcade moins les BIOS) et MESS.ini (Liste des jeux consoles/ordinateurs).
 
Category.ini: Fichier destiné à MAME/MAMEUI/MESSUI et permettant de connaitre, pour chaque jeux, la version ou la catégorie de MAME dans laquelle ils ont été ajoutés. Fichier disponible dans l’archive « category.zip ».
 
Monochrome.ini:
Il s’agit d’un folder pour MAMEUI/MESSUI mais aussi pour MAME (v0.171 et supérieur), permettant de classer les jeux qui sont en noir et blanc. Fichier disponible dans l’archive « category.zip ».
 
Resolution.ini: Ce fichier répertorie toutes les machines émulées par MAME et triées par résolution d’écran. A mettre dans le dossier « Folders » de l’émulateur. Fichier disponible dans l’archive « category.zip ».
 
Screenless.ini: Ce fichier répertorie toutes les machines émulées par MAME (ou clones) qui n’affichent pas d’informations vidéo. Fichier disponible dans l’archive « category.zip ».
 
Cabinets.ini: Dédié à MAME (Arcade uniquement), il s’agit d’un fichier permettant de trier par type de borne d’arcade (on parle ici du meuble). Fichier disponible dans l’archive « category.zip ».
 
FreePlay.ini: Ce fichier dédié à MAME (Arcade seulement) permet de trier les jeux qui possèdent un mode « free-play ». Fichier disponible dans l’archive « category.zip ».
 
Driver.ini: Ce fichier classe les jeux qu’émule MAME par pilotes. Fichier disponible dans l’archive « category.zip ».

 
Catlist/Catver.ini: Collections de folders très utiles pour MAME/MAMEUI (FX/Plus!), contenant un tri par genre très complet, et aussi version, bios, aspect, orientation, résolution…
Le Catver est principalement destiné aux frontends. (il s’agit des versions d’Antopisa, en attendant les versions officielles).
 
Les fichiers seront à jour au fur et à mesure.
 

Télécharger BestGames.ini v0.280 (18 Ko)

Télécharger CHD-Info v0.288 (1.1 Mo)

Télécharger Series.ini v0.289 (59 Ko)

Télécharger Languages.ini v0.289 (103 Ko)

Télécharger Version.ini v0.289 (374 Ko)

Télécharger Category Inifiles pack v0.289 (1.2 Mo)

Télécharger Catlist (MAMEUI) v0.289 (275 Ko)

Télécharger Catver (Frontend) v0.289 (307 Ko)

Site Officiel

En savoir plus…





https://getourbonus.com/fr/accueil

https://www.romspedia.com/