bsnes-plus (ou bsnes+) est un fork de bsnes (basé sur bsnes-classic) destiné à introduire de nouvelles fonctionnalités et améliorations, la plupart visant au débogage. Il s’agit donc d’une version améliorée de bsnes 073 ou l’on retrouve donc l’ancienne interface ainsi que les anciens menus. Plus d’informations ici.
 
Il s’agit d’une version WIP (en cours de développement) dite « instable » basée sur les dernières sources GIT du projet.

 


 
Changements:
– fullscreen mode hides cursor after 5 sec
– build properly with msys2/pkg-config

 
Cette version est compatible avec le pack de shaders disponible ici.
 

Télécharger bsnes-plus (x86) WIP v05.60 (2020/05/09) (7.6 Mo)

Télécharger bsnes-plus (x64) WIP v05.105 (2025/03/23) (12.5 Mo)

Site Officiel

En savoir plus…

Anciennement connu sous le nom de Super Sleuth, il s’agit d’un bon émulateur de Sega Master System, GameBoy, NES, SuperNES et IBM PC XT émulant plusieurs types de composants.

 

yoshi

Les changements sont:

 
– [IBM] Added some more EGA/VGA mapping modes
– [IBM] Added RTC for IBM PC AT
– [ALL] Added more screen rendering options, Direct3D and OpenGL
– [ALL] Fixed Screen Capture Buffer Overrun

 

Télécharger Kindred v1.12 PB 3 (2.1 Mo)

Site Officiel

En savoir plus…

Les dernières versions de GameEX/Arcade et PinballX sont disponibles ci-dessous.
 

 

Télécharger PinballX v7.32 (328 Mo)

Télécharger GameEx v19.98 (460 Mo)

Télécharger GameEx Multiplatform Arcade Edition v19.97 (271 Mo)

Site Officiel

En savoir plus…

Le premier émulateur de Sega Model 3 créé par Bart Trzynadlowski, Ville Linde et Stefano Teso dans sa version de développement (voir ici) [source].

 

 
Les changements:
optimise hash function and parse out transparency layer select bit
 


 
Ajout:
– correction des musiques dans sega rally 2 (mix)
– correction musique 1er niveau 2joueurs (la cave rouge) dans vf3 (pas sûr de la modif, et donc cela peut éventuellement entrainer d’autre problèmes sonore sur d’autre jeux).(inclut officiellement)
 

Les fichiers sont compilés par spindizzi, merci à lui.

 

Télécharger SuperModel v0.4 Build 261117 (5.2 Mo)

Télécharger SuperModel WIP (XP) v0.3a r862 (6.3 Mo)

Site Officiel

En savoir plus…

Voici un émulateur de Nintendo NES développé par Geod Studio utilisant Unity et qui possède une fonction très sympathique de pseudo « 3D ».
 
Les caractéristiques sont les suivantes:
– Participer à l’évolution de la technologie 3Dification
– Jouer à la NES avec de vrai graphisme 3D
– Jouez avec toutes les résolutions prises en charge par votre PC (fenêtré ou en mode plein écran)
– Son mono ou stéréo
– Personnaliser les graphismes comme vous voulez
– Jouer avec des casques de réalité virtuelle via Oculus ou SteamVR (version Pro)
– Mode de rendu Retina (version Pro)
– Caméra de suivi des personnages (version Pro)
 
3DNes fonctionne bien à partir d’un CoreM cadencé à 800MHz ainsi qu’avec une carte vidéo intégrée supportant la Full HD.

 

 
Les changements depuis la v2.0.1 sont les suivants:
 
– V1 3dn profiles are compatible once again
 

Il s’agit d’une version de démo, la version complète et payante (Pro dite VR compatible Oculus Rift – HTC Vive – WindowMR) est disponible sur le site officiel.
 

Télécharger 3DNesVR (Demo) v2.1 (30.7 Mo)

Site Officiel

En savoir plus…

Basé sur le plugin Dev9 de PCSX2, il s’agit d’un plugin qui utilisera des sockets à la place de Tap ou WinPcap, ce qui, espérons-le, éliminera la plupart des problèmes de configuration rencontrés par la plupart des utilisateurs.

 

La version PCSX2 recommandée est la version 1.4.0 ou plus récente.
 
Pour se connecter en utilisant ce plugin il faut:
 
– Copiez le fichier plugin dans le répertoire du plugin dans PCSX2
– Lancez PCSX2, cliquez sur Config> Plugins / Sélecteur de BIOS, dans la fenêtre qui apparaît cliquez sur « Plugins »
– Cliquez sur la liste déroulante à côté de DEV9 et sélectionnez « Test CLR DEV9 », puis cliquez sur Appliquer.
– Cliquez sur OK dans la fenêtre de sélection du plugin.
– Réglez « Auto » sur IP / DNS / Gateway Settings dans les menus PS2 Netconfig.
 
Les changements sont visibles sur le site officiel.
 

Télécharger CLR DEV9 v0.8.7 (66 Ko)

Site Officiel

En savoir plus…

Il s’agit d’un gestionnaire de Rom entièrement écrit en Java et publié sous licence GPL v3.
 

 
Les changements:
– ZipFileSystem class from JRE has problem with file modification over shared network, it pretends that archive file is not writable while it is, so it’s time to duplicate Oracle’s code into JRomManager… and patch it!
– As a consequence ZipFileSystem has also been enhanced to support compression level (from STORE[0] to ULTRA[9]) instead of the DEFAULT[-1] compression
– It is also now possible to choose a size threshold where ZipFileSystem will choose between uncompress to RAM or to temporary folder
– Now that we have full control on ZipFileSystem behavior, ZIP compression level will be automatically set to 1 prior TorrentZipping
– When launching a software from Profile Viewer you will have choice of the machine (sorted by compatibility level)
– Samples are also TorrentZipped now
– Fixed an out of bound stream bug with Jtrrntzip when reading STORE files from archive (that was returning a CorruptZip code)
– Added update check at start with ChangeLog diff (from current to latest) shown in a MessageDialog (English only)
– Added one-click updater: just click the link in the MessageDialog from update checker, and it will download and update by itself, then restart using JUpdater
– Added Jar Installer: just download the Jar version from github and run it with Java
– Added System’s filter new shortcuts menu
– Fixed software list refresh bug in profile viewer
– Fixed special case of ROMs with no name (and with loadflag)

 

Télécharger JRomManager v3.0.5 (78.7 Mo)

Site Officiel

En savoir plus…

Très performant, PPSSPP est un émulateur de Sony PSP (pour Windows, Android et autres via SDL) gratuit et libre écrit en C + + par Henrik Rydgard (très connu sous le pseudo de Ector, déjà auteur de l’émulateur de PSP Potemkin et surtout connu pour Dolphin, ayant également exercé sur nombre d’émulateurs Dreamcast).
 
ppsspp
 
Les changements sont les suivants:
 
– 1.6.1 fixes a few crashes.

 

Télécharger PPSSPP v1.20.4 (19.4 Mo)

Site Officiel

En savoir plus…

Ce projet a été conçu à l’origine pour fournir un remplacement open source à PPJoy. Il s’agit d’un pilote virtuel qui permet d’émuler les manettes et joysticks. L’avantage sur xPadder ou Joytokey est principalement sa gratuité.

 

vjoy

 
Problem:
When moving to Windows 10 release 1803 some users found that vJoy driver stopped functioning. This was manifested in cases where vJoy devices were configured with zero buttons.
 
Fix: This version of vJoy include configuration apps that do not cause such a problem.
 
Recovery: Before installing this version of vJoy make sure the previous configuration (if causes problems) is removed: Run vJoyConfig -r then install this version of vJoy.
 
Status:
Fixed

 

Télécharger vJoy v2.1.9.1 (11.0 Mo)

Site Officiel

En savoir plus…

‘Xbox 360 Controller Emulator’ est une bibliothèque de wrappers qui traduit les appels XInput en appels DirectInput, et permet le support des pads non-compatibles XInput dans les applications (surtout des jeux).

 

En d’autres termes: x360ce vous permet d’utiliser n’importe quel pad dans les jeux qui supportent à la base uniquement le pad XBOX360 !
 
x360ce_General
 
Plus d’infos sur le site officiel.
 

Télécharger x360ce (AnyCPU) v4.30.63 (19.7 Mo)

Télécharger x360ce (64 bits) v3.2.9.82 (1.6 Mo)

Site Officiel

En savoir plus…

Il s’agit d’un émulateur multi-plateformes qui supporte les machines suivantes: ZX80, ZX81, ZX Spectrum, QL, Z88, Timex TS 2068, Sam Coupe, Pentagon 128, Chloe 140 SE, Chloe 280 SE, ZX-Uno, Prism, TBBlue/ZX, Spectrum Next, Jupiter Ace, Amstrad CPC 464.
 

 
– Added ZX-Evolution BaseConf emulation
– Added BetaDisk and TR-DOS emulation
– Added Spectrum +3 emulation
– Added Spectrum keyboard ghosting error feature
– Added ZX Spectrum Recreated keyboard support
– Added improved Spectrum 16/48/+ colour palette
– Added a fast spectrum core (with some features disabled) just for slow devices, like Raspberry Pi 1/Zero. – Now ZEsarUX is playable on RPi1/Zero again!
– Added setting to write protect IDE, MMC, ZX-Uno Flash
– Added setting to show changelog when updating emulator version
– Added actions to file utilities menu: Copy, Move, Rename
– Added setting to disable persistent writes on IDE and MMC
– Added setting to add a watermark on the display
– Added setting to reduce display to a factor of 0.75. Used on RunZX event
– Added setting to save spectrum screen to pbm file (black&white)
– Added a setting to dump ram contents to file when exiting ZEsarUX, ideal to run automatic tests
– Added setting to exit emulator after a number of seconds (–exit-after)
– Added experimental simulation of the SAA1099 audio chip from the Sam Coupe
– Added second Easter Egg 😉
– Added third Easter Egg 😉
 
Improved debugging:

– new enhanced debug cpu menu: view TV electron position on screen, new default view, cursor, toggle breakpoints, run to cursor, change registers, and a lot more…
– added cpu-step-over function on debug menu (was already available from ZRCP)
– added function to write byte to file on ZEsarUX hardware debug ports
 
Improved ZRCP:

– run command is stopped by default when pressing a key (or sending data to the socket)
– when a breakpoint is fired on cpu-step-mode, the breakpoint condition is shown on ZRCP
 
Improved joystick support:

– added joystick test menu
– buttons to events and buttons to joystick configuration are saved on configuration file
 
Improved OSD keyboard:

– now you can press up to all 40 keys (on Spectrum/ZX80/ZX81) at the same time
– now it can be opened from any place (needs multitask on)
 
Improved QL emulation:

– experimental support of LOAD, LRUN command
– can now open qlay mdv microdrive image files
 
Improved file viewer from file utilities:

– specific file viewers for these kind of files: .tap, .zx, .zsf, .sp, .z80, .sna, .spg, .p, .o, .mmc/.ide (fat browser, plus3dos browser), .dsk, .trd, .tzx, .cdt, .flash (zxuno flash, z88 flash, superupgrade flash), .epr, .eprom
– default hexadecimal file viewer for unknown files
– conversion utility
 
Improved TSConf emulation:

– added TSConf DMA, line interrupt, sprites layers
– TSConf rendering: now tiles and sprites are drawn per scanline. Border drawing. Handling of scroll registers
– TSConf debugging: debug for DMA, Video registers, Video layers, Sprites, Tiles
– added TR-DOS emulation support
 
Improved menu interface:

– emulated machine display is no longer faded or switched to black & white when opening menu. There were different visual glitches due to this feature
– a new « tabbed » menus to improve usability and interaction with mouse, joystick and stdout driver: waveform, visualmem, ay player
– Character width can be reduced to 7,6 or 5 pixels width
– added a setting to limit menu event: enabling it you should press the menu key 3 times in a second to open the menu
– added a setting to hide directories from file selector menus, useful when you don’t want the user to be able to navigate the filesystem
– Smartload: now the cursor remembers last file loaded
– added two more GUI styles: Clean and CleanInverse
 
Improved sprite viewer:

– now can see sprites with speccy screen format
– you can view sprites up to 512×192
– you can see tsconf sprites
– you can see pseudo hires zx81 screens
 
Improved TBBlue emulation:

– Added clip window registers
– Added Copper
– Added almost all next extended opcodes
– Added a setting to start TBBlue directly to a 48 rom but with all the Next features enabled, useful for fast snapshot loading
 
– Improved AY Player: now shows waveform volume meter
– Improved VU meters with decay effect on AY Player, AY Registers and Waveform
– Improved text mode drivers (aalib, stdout, simpletext, curses): text settings are in different submenu, setting to set stdout/simpletext fps
– Improved messages windows. You can now have an internal clipboard, press key c to copy to it. Press P on file utils to paste contents to a file
– Improved frameskip: better performance, because realvideo buffer is not updated when frameskip
– Improved sound: Silence detector activated by default but can be disabled
– Improved top speed: loading sound is distorted when setting top speed
– Improved autoload: new setting to run at top speed the reset+load » » process
– Improved real tape loading: now it shows a percentage of tape loaded
– Improved default configuration: when the configuration file doesn’t exist, the new one has the autosave configuration setting enabled
– Improved configuration parsing: if unknown setting found on configuration file, ZEsarUX will open but warns about the error, and the autosave feature is not enabled
– Improved rendering on text mode drivers: now realvideo mode can render directly to black&white text. Try – TSConf with –vo stdout –realvideo –autoredrawstdout
– Improved Linux library dependencies: libssl is not enabled by default on compilation
 
Fixed ZX-Uno emulation:

128kb timings are the same as a Spectrum 128k. When port 1ffd enabled, port FF return FF
Kempston port returns 0 when no kempston selected. New BIOS can be used now

– Fixed TBBlue MMU when using segment 0000-3FFFH
– Fixed Raster interrupts on ZX-Uno and TBBlue. Horizontal raster position was wrong
– Fixed window footer when running Pentagon
– Fixed panic screen: now it is shown on all machines. New design. I hope you never see it 😉
– Fixed some crashes with speech enabled and opening some menus: AY Registers, AY Player, etc…
– Fixed annoying sound on Dandanator rom menu
– Fixed bug on Z80 cpu core, iff2 was not being reset to 0 when firing an interrupt, so reading it by using LD A,R and LD A,I affected many demos
 
Some other minor bugfixes and improvements

 

Télécharger ZEsarUX v13 (44.4 Mo)

Télécharger ZEsarUX Extra v13 (232 Mo)

Site Officiel

En savoir plus…

Applewin est un excellent émulateur Apple IIe pour Windows et développé par Tom Charlesworth. Applewin est basé sur la version originale 1.10.4 d’Oliver Schmidt.
 
– [Bug #555] Fix for showing 559th DHGR vertical column.
– But now an HGR HCOLOR=2 vertical line at column 0 is only 1 DHGR pixel wide.
– Fix TEXT80 to be aligned with DHGR.
– Fix FLASH in TEXT80 (the inverse aux-memory char would overwrite the main-memory char).
– [Change #554] Help: Added a new help page about AppleWin’s SSC emulation.
– [Change #522] SSC: ZLINK not starting unless DCD is set.
– DCD state is now a mirror of DSR unless -dcd switch is used.
– Removed -dsr,-dtr switches, so -modem is now an alias for -dcd.
– [Bug #308] SSC: For TCP mode, support DSR, DCD & CTS status bits.
– SSC: Now DTR must also be set to enable interrupts (in addition to the respective Tx/Rx interrupt bit).
– SSC: Change DIPSW1’s baud rate to 9600 (was 19200).

 
applewin

 

Télécharger AppleWin v1.32.1 (4.3 Mo)

Site Officiel

En savoir plus…





https://getourbonus.com/fr/accueil

https://www.romspedia.com/