La dernière version béta publique de l’excellent WinUAE, l’émulateur Commodore Amiga. La traduction est signée Tradu-France.

 

 
– Ne revient pas en arrière depuis D3D9 standard vers D3D9Ex si la ligne de commande -nod3dshader est utilisé, suppression aussi de la plupart des autres retours en arrière inutiles.
– Réduction de la veille du CPU quand l’opération DMA est active répertoire fichier système/UAE HDF ou le vrai contrôleur SCSI DMA).
– Si l’attente du blitter était activé, le blit utilisait tous les cycles disponibles et les fichiers d’états étaient sauvegardés quand le blit était actif.
– Les enclenchements NMI de la lecture/écriture CIA interne/externe de l’Action Replay III nécessitaient un petit retard (Le NMI must doit être retardé jusqu’à la fin de l’instruction suivante). Ce qui permet de corriger le problème avec l’option de « Démarrage » du test de virus.
– Correction d’un problème avec le bouton du joystick/souris.
– Inclus le message « JIT direct switched off: reason » dans le journal d’erreur.
– Le mode chemin relatif ignorait le chemin Filesys (Fichier Système).
– Correction d’un problème avec le mode hôte du FPU qui pouvait retourner de mauvais résultats.
– Le découpage du fichier d’enregistrement AVI (limité à 2G) vidait les tampons sons ce qui créaient des problèmes de sons. Ajout de la ligne de commande -max_avi_size – pour choisir la taille de découpage.

 

Télécharger WinUAE (Public Beta) [32 bits] v6.1.0 Beta 23 (5.3 Mo)

Télécharger WinUAE (Public Beta) [64 bits] v6.1.0 Beta 23 (8.5 Mo)

Télécharger WinUAE (Public Beta) [32 bits] v6.1.0 Beta 23 FR (5.4 Mo)

Télécharger WinUAE (Public Beta) [64 bits] v6.1.0 Beta 23 FR (8.5 Mo)

Site Officiel

En savoir plus…

Voici les derniers builds de Creamymami concernant MAME(Arcade).

 

– Caname c’est MAME(Arcade) ne supportant que les jeux CPS et Neo Geo.
– NMamex2 est un build de l’émulateur MAME(Arcade) sous Windows qui ne supporte que les jeux NeoGeo.
– Mame32k c’est MAME(Arcade) intégrant le module Kaillera (jeu en réseau).
– Mame32 More! est une version basée sur Mame Plus! mais compilée avec Kaillera.

 

Télécharger Caname v0.62.289 (2026/11/07) (2.4 Mo)

Télécharger NMamex2 v0.289 (2026/11/07) (1.7 Mo)

Télécharger Mame32K v0.67.289 (2026/11/07) (9.5 Mo)

Télécharger MAME32 More! v0.84.289 (2026/11/07) (12.2 Mo)

Site Officiel

En savoir plus…

Il s’agit de FBA Shuffle faite par Creamymami, contrairement aux versions de KOF2112, cette version est plus proche de la version officielle de FBA.

 

fba_shuffle_lang

 

Télécharger FBA Shuffle (x86) [Creamymami] v2.4.0 (2026/11/07) (6.6 Mo)

Télécharger FBA Shuffle (x64) [Creamymami] v2.4.0 (2026/11/07) (7.1 Mo)

Site Officiel

En savoir plus…

GroovyMAME est un émulateur multi-systèmes basé sur MAME (Arcade + Consoles + Ordinateurs) et qui se focalise sur le rendu sur écran CRT (Moniteur de PC ou d’arcade avec fréquence particulière) car les auteurs sont convaincus que la technologie CRT est un must quand il s’agit de profiter de l’émulation dans toute sa splendeur. Cependant GroovyMAME peut être utilisé également sur écran LCD (principalement sur les modèles qui permettent un rafraîchissant à des taux personnalisés).
 

 

Beaucoup d’améliorations provenant de Groovy avaient été intégrées dans MAME il y a quelques temps rendant Groovy obsolète, mais depuis de nouvelles fonctions ont été développées en parallèles justifiant ces nouveaux builds.

 

A noter que des LiveCD sont également disponibles sur le site officiel.
 

 
Note sur la version D3D9EX:
Cette version intègre un patch Direct3D9Ex (également connu sous le nom de Direct3D 9.0L ou 9.L, le L faisant référence à Longhorn, nom de la base de code de Windows Vista) qui permet de bénéficier de certaines fonctionnalités introduites par l’utilisation des drivers WDDM tout en maintenant la compatibilité avec les applications écrites pour Direct3D 9. L’interface Windows Aero s’appuie sur D3D 9Ex et utilise certaines des fonctionnalités non présentes dans Direct3D 9 comme la possibilité de partager des surfaces DirectX entre plusieurs processus.

 

Télécharger GroovyMAME (x86) v0.227 SwitchRes v0.017t (56.4 Mo)

Télécharger GroovyMAME (x64) v0.227 SwitchRes v0.017t (58.1 Mo)

Télécharger GroovyMAME D3D9Ex (x86) v0.227 SwitchRes v0.017t (56.4 Mo)

Télécharger GroovyMAME D3D9Ex (x64) v0.289 SwitchRes 2.22f (98.5 Mo)

Site Officiel

En savoir plus…

Créé par hex-usr (et basé sur Higan), il s’agit d’un émulateur de NES/VS.System/PlayChoice-10/SuperNES/GameBoy/GameBoy Color/GameBoy Advance/WonderSwan/WonderSwan Color/SwanCrystal/GameGear/SMS/Megadrive/PC-Engine mais aussi des sous systèmes Super GameBoy, BS-X Satellaview et Sufami Turbo, mais ajoute un lots de fonctionnalités en suppléments comme davantage de mappers NES, le NES Four Score, le Zapper, le Power Pad, l’adaptateur 4 joueurs, le VS. System (uniquement les jeux UniSystem n’utilisant pas le Zapper), le PlayChoice-10 mais aussi d’autres éléments à découvrir. Il est disponible en plusieurs langues.
 
L’auteur propose également un gestionnaire de paquet MSU1 nommé Mercurial-Magic ainsi qu’une application complémentaire nommée Launcher permettant de lancer des dossiers de cartouches avec des émulateurs non-higan.

 

nside

 
Cette version, compilée par notre ami Lo, est basée sur Higan 104r15.
 
Les modifications sont les suivantes:
 
r469
-Update to higan v104r15

r470
-Revert Super Scope cursors (balanced profile only)
-Reverted the Super Scope’s cursors in the balanced profile to the ones used in higan.
nSide’s accuracy profile will not be used as a libretro core, so it will continue to use the unique turbo cursor design.

 
Lire le readme pour plus d’informations (assez importants).
 

Télécharger nSide (x86) v009.16 r528 (10.3 Mo)

Télécharger nSide (x64) v009.16 r528 (10.7 Mo)

Site Officiel

En savoir plus…

bsnes-plus (ou bsnes+) est un fork de bsnes (basé sur bsnes-classic) destiné à introduire de nouvelles fonctionnalités et améliorations, la plupart visant au débogage. Il s’agit donc d’une version améliorée de bsnes 073 ou l’on retrouve donc l’ancienne interface ainsi que les anciens menus. Plus d’informations ici.
 
Il s’agit d’une version WIP (en cours de développement) dite « instable » basée sur les dernières sources GIT du projet.

 


 
Changements:
– fix superfx trace logging (and also fix a boneheaded copy/paste mistake with the superfx tracemask)
 
Cette version est compatible avec le pack de shaders disponible ici.
 

Télécharger bsnes-plus (x86) WIP v05.60 (2020/05/09) (7.6 Mo)

Télécharger bsnes-plus (x64) WIP v05.105 (2025/03/23) (12.5 Mo)

Site Officiel

En savoir plus…

SSE pour « Steven Seagal Edition » est un émulateur d’Atari ST basé sur le STeem original v3.2 de 2004. Il emprunte également des améliorations en provenance de Hatari.

 

Les améliorations sont les suivantes :
 

v3.9.3 Features
– Record to YM file.
– ‘Advanced Settings’ option (D3D). When unchecked, other options are simplified.
– New Option General/Mute sound when inactive.
– Notice: ‘Macros’ option page renamed ‘Record Input’.
– When running a new version for the first time (based on existing ini if any), you get dialogs prompting you for a shortcut, home directories, etc. This is to give you a chance to update the link in the Start Menu, but it’s optional and you may skip the rest too.
 
v3.9.3 Emulation improvements
– Anti-aliasing filter for YM2149 emu (option ‘C2’). This improves the sound with all sample rates, at the cost of some CPU use (Star Trek). Thx Mike Perkins for the C++ class.
– Hardware Hacks:
*Support for Freeboot (disk side selector).
*Support for STF hardware overscan (LaceScan and Autoswitch).
*Support for STE YM/DMA sound mix fix, useful for Petari’s little games 😉
– STE paddles (thx Petari).
 
v3.9.3 Bugfixes / Refactoring
– Blitter start test (Great Giana Sisters STE).
– 6301/ACIA emulation (Warp STX).
– Removing some hacks in GLU/Shifter emulation.
– Floppy drive emulation at fast speed (no snails) is more compatible (Exile, Super Hang-On, Lost Patrol, …).
– Multiple screens can have negative coordinates (D3D).
– Fire button of STE joysticks.
– Missing macro in OR.W Dn, (D-Bug 117).
– WD1772: Wrong status after command $D0 (Rogue SCP). Trouble at Index Pulse (some dumps of Gunship SCP).
– Lost on ST disks with <9 sectors (Wipe-Out-RPL, broken v3.9.0) - Black borders in monochrome mode (bug since the origins!) With borders, the screen isn't centred anymore, sorry about that, but centring caused timing problems. It is correct emulation. - Removed "multimedia" joystick support as it can cause crashes on some systems, only DirectInput is used now. - Record Input and Paste Text with option 'C1'. - Messed display when coming back from optional 16bit Fullscreen. - Slow Motion (broken v3.8.2). - Possible crash when loading a profile.

 

Télécharger Steem SSE (D3D) [32 bits] v4.2.1 R3 (6.8 Mo)

Télécharger Steem SSE (D3D) [64 Bits] v4.2.1 R3 (7.6 Mo)

Site Officiel

En savoir plus…

Voici les derniers émulateurs (et aussi les plus fréquemment mis à jour) en cours de développements.
 

 
VDosplus: Emulateur de DOS.

Citra: Emulateur de 3DS.

Decaf: Emulateur de WiiU.

RPCS3: Emulateur de Playstation 3.

Redream: Emulateur de Sega Dreamcast.

CXBX: Emulateur de Microsoft X-Box.

Xenia: Emulateur de Microsoft X-Box 360.

Cen64: Emulateur de Nintendo 64 Préliminaire.

 

Télécharger vDosPlus (2018/03/01) (1.8 Mo)

Télécharger Citra (Final build) (2024/03/07) (140 Mo)

Télécharger Decaf-Emu Build 231109 (40.8 Mo)

Télécharger RPCS3 (WIP) v0.0.43 Alpha (2026/11/16) (35.5 Mo)

Télécharger Redream v1.5.0.1239 (3.1 Mo)

Télécharger Xenia v1.0.2844 (2026/11/16) (3.9 Mo)

Télécharger CXBX Reloaded v0.1.0 (1.3 Mo)

Télécharger Cen64 (WIP) (2022/10/02) (2.6 Mo)

Télécharger Cen64 (Debugger) r2015.01.18 + (DEV) r2017.04.23 (3.4 Mo)

Créé en Mai 2013, PinballX est un frontend gratuit pour jeux de flippers numériques et développé par l’auteur de GameEx. Il est compatible avec les bases de données et les médias disponibles pour HyperPin. Il bénéficie en particulier des processeurs à multiples coeurs.

 

 

Télécharger PinballX v2.41 (51,6 Mo)

Site Officiel

En savoir plus…

Il s’agit du Frontend GameEX mais optimisé pour les jeux d’arcade.
 
Il est plus léger, possède des améliorations cosmétiques et prend en charge les nouveaux thèmes vidéo de chez EmuMovies.
 
Il prend en charge les systèmes de MAME et d’arcade et présente les différences de caractéristiques suivantes par rapport à la version standard de GameEx:
 
– Supporte les thèmes vidéo.
– Moins de code. Plus léger. Moins d’options.
– Design optimisé pour les écrans de télévision et d’arcade.
– Support des résolutions basse (640 x 480).
– Apparence plus proche d’un HyperSpin.

 


 

Télécharger GameEx Arcade Edition v14.94 (60,3 Mo)

Site Officiel

En savoir plus…

GameEx est une interface graphique pour vos émulateurs. Elle sert également de lecteur vidéo, DVD et CD.

 

 
Certaines fonctionnalités de GameEx :
– lit aussi les fichiers audio.
– supporte les affichages LCD/VFD, ArcadeVGA.
– peut adapter son affichage pour les écrans larges, elle peut aussi tourner l’affichage de 90° (vertical).
– peut être contrôlée à distance, ou par une manette ou par la souris uniquement.
– supporte les contrôleurs arcade : HotRod, X-Arcade, SlikStik et IPAC.
– est compatible avec les interfaces entre PC et cartes arcade : U360, I-PAC, J-PAC.
– intègre un Jukebox qui supporte les fichiers ogg, mp3, wma, m4a, et flac.
– Les musiques peuvent être lues et changées pendant que vous êtes en train de jouer.

 

Ce frontend est disponible en version gratuite & payante (17 $) incluant de nombreuses autres fonctions.

 

Télécharger GameEx v14.94 (45,0 Mo)

Site Officiel

En savoir plus…

pfeMame (écrit par Gareth Finch) est un frontend pour MAME, écrit en Python. Il est multiplateforme (testé sur Linux – Ubuntu et Windows). Il comprend également une interface graphique destinée aux MameCab qui permet le contrôle à l’aide de joystick / manette.

 

pfemame_main

 
v2.0.0 Build 1
• Updated version control to something more standard MAJOR.MINOR.REVISION BLUILD
• Made the right click menu item ‘Play game without softlist hash support’ only enabled if the program selected actually has a short name.
• Added right click menu items to run Sega model 2/3 games using a different emulation engine. I’ve done this as I quite like some of those games (Daytona), but MAME currently doesn’t emulate them very well, if at all.
• Fixed bug in dynamic search – when setting current row to the first row (0), it needs to ensure there are actually results otherwise the ultimatelistctrl throws an error.
• Visual Pinball tables support has now been added in properly. When you refresh the database, if you have set a path to the visual pinball tables and the executable file, then the tables will be added to the games list under ‘Visual Pinball’ – just search for that. The number of runs, favorites, etc work as per normal. You will have to copy game snaps into the snapshots folder yourself though.
• Removed the old ‘temporary’ method for playing Visual Pinball tables
• The manual has been updated to include the new alternate emulation engines
• Removed some more unnecessary use of ‘global’
• Moved some repeated code into functions
• Updated the menubar code to be more consistent and make it easier to add icons or effects / colors at a later date
• Have moved some global variable declarations to the main module in the main application – now that I know how to use global variables properly. No change to function and personally I think it’s a bit harder to read, but hey, apparently, it’s the right way to do it. Have a lot more that will need to be corrected over time – no hurry.
• Improved output display of the rom information window – style now consistent with the rest of the application
• Added a copy to clipboard option for the rom information display window. Aligned the buttons to the right and made the text uppercase as per other windows
• When running a game using a non-MAME emulation engine (e.g. Sega Model 2/3), a note is made in a new DAT file called enginetouse.dat. After that when you select that same game it will look up what engine to use. For now, if you want to go back to using MAME you will have to delete this game entry from the enginetouse.dat file manually.
• Replaced the exists and favorites columns Yes / no text with ticks and crosses – this requires a database refresh to start working properly.
• Fixed a bug that picks up on a configparser error when reading the catver.ini file. If it finds an error you will now be told that it can’t parse the file and you should revert to a previous one. Had to do this with the catver.ini version 0.189 as it broke my parser. Change made in pfemame.py and gametypes.py.
• Added a ‘allow no value=true’ to the configparser reading the catver.ini file as 0.189 version contains some lines with no values and it broke my parser. Change made in pfemame.py and gametypes.py.
• Added ‘Computer’ as a system type. Prior to catver 0.189 it was called ‘Home Computer’
• YOU MUST OPEN GAME CATEGORIES AND SET UP YOUR GAME CATEGORIES AGAIN AND THEN REFRESH THE GAMES DATABASE WHEN UPDATING TO THIS VERSION OF PFEMAME DUE TO CATVER.INI CHANGES.
• Updated the project to work with Python 3 and wxpython phoenix. A lot of code changes to support the differences between 2.7 and 3.x. If you want to build the project yourself then you will need to move across to Python 3.x .
• Confirmed issue with Ultimatelistctrl.py library. As of wxpython phoenix a divide is treated as a float. This was causing exceptions in the right click context menu. Raised the issue on Github and a change will be made. If you are building from scratch you will need to find this line in the ultimatelistctrl.py library and add a second slash (divide) to instruct it to perform an integer divide (Note, as of 17 Sept I see that the download files are updated so you no longer have to do this manually);
current = y/self.GetLineHeight()
• Changed the Windows exe creation script and batch file to use cx_Freeze (Was previously using py2exe) as py2exe is currently not supporting python 3.6. This change means you have to install cx_Freeze (pip install cx_Freeze) if building from source.
• Added a check in rungame to make sure that if we are trying to use an alternate emulation engine, that the paths to that engines executable file are actually valid.
• Removed wx.richtext import from checkall as its not been used in a long time.
• Merged icons and images folders into the images folder (removed icons folder). Moved the pfeMAME.ico file from root to the images folder.
• Replaced the old wait display with a proper splash screen – its displayed for 5 seconds on application startup
• Fixed bug in preferences.py. The code to write to game specific INI files used a binary write which worked ok in python 2.7 but is not valid in 3.x as its text I am writing.
• Removed the minimise button from sub windows (preferences etc) and set them to always on top so that you can’t have a confusing situation where the window gets minimised so you think you’re working with the main window but nothing is happening as the sub window has control.
• A whole lot of code improvements / corrections. Not bug fixes but things like removing unnecessary duplications, id’s, variables, complexity, etc)
• Added a verify rom toolbar icon
• Added an adjuster to the horizontal size of the filepaths frame and panels to try and may it lay out better in both Windows and Linix – its better but still needs some work.
• Removed the blank.png image used in Tileview with wx.Image(x,y) as this does the same thing and is built in.

 

Télécharger pfeMame (32 bits) v3.9.2 (119 Mo)

Télécharger pfeMame (64 bits) v1.008 (12.5 Mo)

Site Officiel

En savoir plus…





https://getourbonus.com/fr/accueil

https://www.romspedia.com/