Un très bon émulateur de TI-99/4A tournant sous Windows. Il fut connu sous le nom d’AMI99, mais fut renommé car beaucoup de personnes pensaient qu’il s’agissait d’un émulateur Commodore Amiga.

 

classicti99classicti991

 
Les fonctionnalités :
-Les roms systèmes & plusieurs cartouches sont inclues sous licence Texas Instruments
-démarre et fait fonctionner correctement toutes les fonctions OS (excepté l’I/O et le TI BASIC,
-la plupart des modules fonctionnent très bien
-Le switch des cartouches XB/Atarisoft/Jon379/SuperSpace cartridge est supporté
-Emulation complète du son sur tous les channels, en incluant le support du son digitalisé
-Speech implémenté à la fois sur les roms et sur le speak externe.
-Le scan CRU du clavier est implémenté
-Support du joystick et du timer 9901
-Le disque supporte les fichiers V9T9, TIFILES/Xmodem, les fichies natifs Windows, les images disque V9T9 DSK & PC99 DSK (les images DSK sont en lecture seule)
-DirectX fenetré et plein écran, comme les modes fenétrés non-DirectX
-détection des collisions (par pattern)
-Nombreux filtres vidéos en option (HQ4X, 2xSAI, SuperEagle, NTSC, etc)
-débugger intégré en single step
-Emulation clavier PS/2 keyboard
-Sélection des menus par souris (double-cliquer sur l’écran)
-Support de la carte 1MB Super AMS
-Code source complet inclus
 

Télécharger Classic99 v3.91 (10,7 Mo)

Site Officiel

En savoir plus…

Créé par Exzap, il s’agit du second émulateur de Wii U à être disponible au public mais le premier à pousser jusqu’à l’émulation de jeux commerciaux. Il peut décrypter les images Wii U qui utilisent le format Wud mais également les fichiers RPS ou RPL. La résolution interne peu aller jusqu’à 1920×1080 selon les jeux. A noter que pour le moment, un seul contrôleur est accepté, il s’agit du DRC (GamePad) de la Nintendo Wii U. Cette version n’est compatible que pour les Windows x64 avec une carte graphique gérant OpenGL 4.0 ou supérieur.

 

cemucemu_mario cemu3
 
Les changements:
 

En résumé:
– Hardware acceleration for Streamout
– Recompiler improvements
– Optimized file operations + AES-NI support
– Minor bugfixes, graphic and compatibility improvements

 
En détails:
# CEMU 1.6.2c

– CPU: Fixed a bug in recompiler PSQ_STU instruction
 
# CEMU 1.6.2 + 1.6.2b

– CPU: Fixed a rare crash bug that could occur when the recompiler attempted to analyze certain functions
– CPU: Improved detection of function entry points for recompiler
– CPU: Added instructions LBZUX, SRW., PSQ_LU, PSQ_STU and PS_DIV to recompiler
– CPU: Adjusted recompiler PS_MERGE10 instruction to generate faster code

– FS: Various optimizations to FSA thread, resulting in quicker processing of file operations
– FS: If available, AES-NI is now used for filesystem decryption

– AX: Added API AXAcquireMultiVoice()

– NFP: Deactivate event will now be correctly signaled

– GX2: Added support for Streamout emulation via OpenGL’s Transform Feedback
– GX2: Slightly reduced the number of shaders that need to be compiled (by optimizing away render states that previously affected the generated shader code)
– GX2: Improved handling of bottom of pipe event
– GX2: Added API GX2DrawIndexedImmediateEx()
– GX2: Fixed a bug in the buffer cache that could cause out-of-bounds allocations which would result in CEMU crashing
– GX2: Fixed a bug where textures would be immediately reloaded from RAM after being updated by a GPU-side operation

 

 
Une liste de compatibilité est disponible ici.

 
Site source.

Télécharger Cemu v1.6.2 (2.0 Mo)

Site Officiel

En savoir plus…

fs-uae est un emulateur multi-plateformes (sur Linux , mac osX et windows) reprenant les travaux de WinUAE/E-UAE/PUAE en mettant l’accent sur l’émulation des jeux sur lecteur de disquette et CD-Rom. A noter que cette version propose un launcher dédié.

 

Une caractéristique unique est le jeu en ligne. Vous pouvez maintenant jouer à des jeux Amiga contre (ou avec) des amis sur Internet.
L’émulateur utilise le dernier code d’émulation Amiga WinUAE du projet et nécessite un ordinateur moyennement rapide avec accélération graphique (OpenGL) pour travailler. Une manette de jeu ou d’un joystick est recommandé, mais pas obligatoire (FS-UAE peut émuler une manette de jeu en utilisant les touches fléchées et Ctrl de droite / touches ALT).

 

fsuae
Le launcher est relié au site OAGD, immense base de données sur l’Amiga et permet parfois de vous mener directement à la page de téléchargement du jeu. Il simplifie grandement les réglages relatifs à WinUAE. Formidable !

 
Les nouveautés:

 
– Alt+F4 and Cmd+Q will no longer quit FS-UAE (in full keyboard emulation mode).
– Use raw input on Windows again (allows grabbing of Windows keys, etc).
– New option raw_input = 0 will disable use of raw input for keyboard.
– Fixed loading shaders from fs-uae.dat.
– Updated Xbox 360 configs for Linux.
 
Changes in FS-UAE Launcher 2.8.1:

– Fixed problem where rating could be reset for first loaded game/variant.
– New experimental option: relative_temp_feature.
 
Changes in FS-UAE Arcade 2.8.1:

– Added stretch / keep aspect toggle button to top right menu.
– Added V-Sync toggle button to top right menu.
– Ability to see and change variant before starting the game.
– Make menu rendering conformant to FS-UAE style.
– More transition animations.
– New cover rendering for non-portrait covers.
– Use –platform= to start with a given platform filter, e.g. –platform=cd32.
– Variant sort order fixed to be same as in FS-UAE Launcher.
– Fixed arrow keys for FS-UAE Arcade on MacOS.
– Reversed position of platform and publisher names.

 

Télécharger FS-UAE (Stable) [32 bits] v2.8.3 (58.8 Mo)

Télécharger FS-UAE (Stable) [64 bits] v3.2.35 / v3.2.35 (75.3 Mo)

Site Officiel

En savoir plus…

GameEx est une interface graphique pour vos émulateurs. Elle sert également de lecteur vidéo, DVD et CD.

 

Certaines fonctionnalités de GameEx :
– lit aussi les fichiers audio.
– supporte les affichages LCD/VFD, ArcadeVGA.
– peut adapter son affichage pour les écrans larges, elle peut aussi tourner l’affichage de 90° (vertical).
– peut être contrôlée à distance, ou par une manette ou par la souris uniquement.
– supporte les contrôleurs arcade : HotRod, X-Arcade, SlikStik et IPAC.
– est compatible avec les interfaces entre PC et cartes arcade : U360, I-PAC, J-PAC.
– intègre un Jukebox qui supporte les fichiers ogg, mp3, wma, m4a, et flac.
– Les musiques peuvent être lues et changées pendant que vous êtes en train de jouer.

 

Ce frontend est disponible en version gratuite & payante (17 $) incluant de nombreuses autres fonctions.

 

Télécharger GameEx v14.60 (41,1 Mo)

Site Officiel

En savoir plus…

VMware vous permet de lancer plusieurs systèmes d’exploitation sur un même PC sans avoir besoin de partitionner votre disque et sans reboot. Vous pouvez facilement isoler et protéger chaque environnement, et bien entendu les applications et données qui tourne dessous. Il permet aux utilisateurs de configurer facilement chacun des systèmes d’exploitation, ce qui inclut un interface réseau complet, gestion de périphériques, partage de fichiers, copier/coller et annuler les changements fait durant un session. VMware permet aux « opérateurs » d’encapsuler et de manipuler chaque environnement, la possibilité de faire un retour arrière en redémarrant une application ou encore de déplacer un environnement a travers différentes machines configurées.

 

vmware

 
Les changements sont visibles ici. A télécharger ici.
 

Site Officiel

En savoir plus…

Voici une nouvelle version du pack d’icônes à utiliser avec FBA (basé sur celui de Mamu_) que Gab75 a mis à jour.
 
Dans FBA aller dans le menu Misc / icons / enable (et sélectionner).

 

Télécharger FBA Icons v0.2.97.39 (2,0 Mo)

Site Officiel

En savoir plus…

Créé par Avery Lee (l’auteur de VirtualDub), il s’agit d’un émulateur d’Atari 8 bits (800/800XL/130XE) disponible en 32 et 64 bits. Il dispose de beaucoup d’options ainsi que d’une bonne compatibilité. Il prend en charge les jeux protégés conformément à l’émulation. Il s’agit d’une version de développement au stade de béta.

 
– Debugger: Added .crc command.
– Disk: Added support for full disk drive emulation of 810, Happy 810, 810 Archiver, 1050, 1050 Duplicator, US Doubler, Speedy 1050, Happy 1050, Super Archiver, TOMS 1050, and Tiger 1050 drives.

 
Topic des versions Beta.

Télécharger Altirra (Beta) v2.90 Test 11 (3,9 Mo)

Site Officiel

En savoir plus…

Hatari est un émulateur Atari ST et STE tournant sous Linux, BSD, BeOS, Mac OS X et bien d’autres systèmes supportants la librairie SDL, il est basé sur les sources de WinSTon.
 
Cette nouvelle version ajoute le support des Atari TT et Falcon. Tout ceci est encore expérimental, il n’y a d’ailleurs pas d’émulation du DSP du Falcon. Plusieurs correctifs ont été ajoutés, le build pour Windows se compile mieux au passage.
hatari
 
Emulation:
– Machine:
– Support for MegaST & MegaSTE machines added
(this also replaces the Real Time Clock / RTC option, since this chip
is only available on the Mega machines)
– The general purpose registers of the TT SCU are now correctly emulated
(this fixes the problem with AHDI not finding any partitions during boot)
– HD:
– Fix: Disable GEMDOS opcodes after GEMDOS drive is disabled
– Fix: GEMDOS HD can now be initialized multiple times,
e.g. when running EmuTOS RAM image from a normal TOS
– Fix: WORD access to IDE data register at 0xf00002
– Fix: ‘*.*’ pattern with GEMDOS HD should match also files
without extension
– Video:
– Full rewrite of the GLUE state machine, including support for the
4 wakeup states in STF mode, as well as more accurate video timings
(hbl, timer b, top/bottom and left/right removal, mixing 50/60/71 Hz
lines)
– Correctly shows the last 8 pixels for STE 224 byte overscan
– Fix: reading video counter $FF8205/07/09 after modifying it
while display is ON
– Fix: location of the video counter’s restart when screen runs at 60 Hz
– TT: sync ST & TT color registers immediately on write, handle
palette bank setting correctly, fix duochrome colors
– Falcon: handle byte access special case for ST color registers
– Falcon: border color support also in HiColor
– better hbl/timer b interrupts when CPU runs at 16/32 MHz
– Sound:
– Special cases for STE DMA sound when start address = end address
– Increase STE DMA volume when compared to the YM2149 volume
– Greatly improve Falcon DMA sound
– CPU:
– use WinUAE CPU for STF/STE mode too, not just Falcon (old CPU core
is considered deprecated)
– improved IACK and simultaneous interrupts
– access IO regs on 2 cycle boundaries when possible
– More accurate 68060 mode (instructions from previous CPU versions
removed in 68060 aren’t accepted/emulated anymore)
– Misc bus error / IO mem register handling fixes for TT & Falcon
(e.g. add TT DIP switch register handler)
– Blitter:
– Better bus arbitration when blitter is started
– Don’t cause bus error when accessing regions causing CPU bus error
– Fixes to DSP addressing
– Floppy:
– Fix the value of the WPT bit when inserting/ejecting a write protected
floppy
 
Emulator:
– Generic fixes:
– Autosave to already existing file works first time after v1.4
(dialog for file overwrite got automatically canceled on exit)
– SDL GUI:
– MegaST/MegaSTe support
– Shortcuts can be configured in the keyboard dialog
– User can provide volume label when creating a floppy image
– Show dialog on HD image size issues
– Better SDL2 support:
– SDL2 is now enabled by default
– Resizable windows, including ST/STE screen scaling
– « –desktop » option is used also for ST/STe instead of « –desktop-st »
– Command line:
– Renamed –fpu-type option to –fpu
– Configuration:
– Hatari defaults to ST both with oldUAE & WinUAE CPU core
– Preferred private configuration directory is now ~/.config/hatari
on Linux/Unix (the legacy location ~/.hatari is still used if
the other one does not exist yet)
– Windows config location is now: AppData\Local\Hatari
– Support SDL key names in keymap files in addition to key codes
– Comment characters (#, 😉 can also be mapped in keymap file
– Added NatFeats SCSI (NF_SCSI) driver for Linux version of Hatari
– Debugger:
– Fix: close debugger log file only when explicitly requested,
not when continuing emulation from debugger
– Fix: direct DSP register, disasm and memdumps to debugger log
file, similarly to CPU
– Fix: direct CPU and DSP symbol traces to trace file, not stderr
– Fix: ‘:once’ option when there’s only one breakpoint (v1.9 regression)
– Fix: NatFeats NF_DEBUGGER command now actually drops to debugger
– ‘n’ (next) command run until (dbcc backwards branch) loop exits
(in addition to running until subroutine and exception calls return)
– Support Atari debugger XBios(11) / Dbmsg() API
– ‘variables’ / ‘v’ command to list Hatari debugger’s builtin symbols
– Also trace exception can be caught
– Removed features:
– Support for rendering to 8-bit host screens
– Support for (buggy) RsConf() interception with –bios-intercept
 
Other:
– Allow building without Zlib
– zip2st tool can convert directories to .st image files,
not just .zip files.
 
Fixed games:
– Chainz and Jewelz by Paradize (blitter, bus errors)
 
Fixed demos:
– spec512 image in the Intro of the Place To Be Again (video, restart counter)
– Menu screen in the Place To Be Again (video, writing/reading video
counter during active display)
– A Little Bit Insane by Lazer (no DMA sound during the demo)
– LoSTE and Closure by Sync (video, wakeup states and glue timings)
– Death of the left border by TNT (video, stabilizer)
– Gen4 Demo by Ziggy / Overlanders (video)
– Suretrip 49% by Checkpoint (cpu, exceptions stacking)
– Tymewarp by YM Rockerz (megaste mode, cpu control at $ff8e21)
– overscan plasma in Graphics Sound 2 in Relapse by Cybernetic (blitter)
– RGBeast by Agression (blitter)
– Drone by DHS, PhotoChrome Viewer by DML (video, last 8 pixels)
 
Notes:
TOS NF_SCSI driver is available from:
http://hddriver.seimet.de/en/downloads.html

 

Télécharger Hatari (x86) v2.6.1 (5.9 Mo)

Télécharger Hatari (x64) v2.6.1 (6.0 Mo)

Site Officiel

En savoir plus…

Un Frontend pour MAME(Arcade + consoles + ordinateurs), il est aussi compatible avec AdvanceMAME, MESS, RAINE… A la fois petit et complet, il gère les MP3, les images animés, affiche en plein écran (on est presque déjà en train de jouer). Il permet même de créer un économiseur d’écran à partir des images des jeux 🙂

 

  • Extended display_size option to allow to select the mode height.
  • Windows binaries built with MingW 4.9.3 using the MXE cross compiler at commit 62bcdbee56e87c81f1faa105b8777a5879d4e2e with targets i686-w64-mingw32 and x86_64-w64-mingw32 and optimization -O2.

 

Télécharger AdvanceMENU (Win) (0 O)

Télécharger AdvanceMENU (Dos) (0 O)

Site Officiel

En savoir plus…

AdvanceMESS est un version non-officielle de MAME(MESS) spécialement conçu pour l’affichage TV avec beaucoup d’options d’affichage, mais aucun changement niveaux émulation par rapport à la version officiel. Cette version est optimisé pour les processeurs Pentium.

 

  • Set the SCHED_FIFO scheduling policy with sched_setscheduler(). This is reported to improve performance on Raspberry Pi 2 boards. Note that this ha effect only with root permission. You can see in the log for « os: scheduling ».
  • Windows binaries built with MingW 4.9.3 using the MXE cross compiler at commit 62bcdbee56e87c81f1faa105b8777a5879d4e2e with targets i686-w64-mingw32 and x86_64-w64-mingw32 and optimization -O2.
  • DOS binaries built with DJGPP 4.8.5 from https://github.com/andrewwutw/build-djgpp

 

Télécharger AdvanceMESS (Win) (0 O)

Télécharger AdvanceMESS (Dos) (0 O)

Site Officiel

En savoir plus…

Créé par Andrea Mazzoleni. AdvanceMAME est une version non-officielle de MAME(Arcade) spécialement conçue pour l’affichage, en effet elle gère les écrans d’arcade, les sorties TV, ainsi que les écrans standard. Il s’agit de la version idéale pour avoir un affichage authentique (absence de flou), elle apporte également quelques plus coté émulation : Touches programmables, Anti-quit intelligent, Rip video et Son… Cette version est optimisé pour les processeurs Pentium.

 

  • Imported the Toaplan driver from ThunderMAME32Plus-v0.106X. This adds sound support with samples at the games: ‘batsugun’, ‘dogyuun’, ‘ghox’, ‘samesame’, ‘tekipaki’, ‘vfive’ and ‘vimana’.
  • Imported the CPS3 driver from ThunderMAME32Plus-v0.106X. This adds the games: ‘sfiii’, ‘jojo’ and ‘warzard’.
  • Fixed a crashing issue in 68000 games, like Altered Beast.
  • Added knocker support to Q*bert. You should see a keyboard led on when the knocker is active [hainet].
  • Set the SCHED_FIFO scheduling policy with sched_setscheduler(). This is reported to improve performance on Raspberry Pi 2 boards. Note that this ha effect only with root permission. You can see in the log for « os: scheduling ».
  • Windows binaries built with MingW 4.9.3 using the MXE cross compiler at commit 62bcdbee56e87c81f1faa105b8777a5879d4e2e with targets i686-w64-mingw32 and x86_64-w64-mingw32 and optimization -O2.
  • DOS binaries built with DJGPP 4.8.5 from https://github.com/andrewwutw/build-djgpp

 

Télécharger AdvanceMAME (Win) v5.0 (43.5 Mo)

Télécharger AdvanceMAME (Dos) v5.0 (30.4 Mo)

Site Officiel

En savoir plus…

bsnes-plus (ou bsnes+) est un fork de bsnes (basé sur bsnes-classic) destiné à introduire de nouvelles fonctionnalités et améliorations, la plupart visant au débogage. Il s’agit donc d’une version améliorée de bsnes 073 ou l’on retrouve donc l’ancienne interface ainsi que les anciens menus. Plus d’informations ici.
 
bsnes+
 
bsnes64
 
Changements:
MSU1: per byuu, this is the intended behavior and the removal was an unintended regression in higan v95. reverting will continue to keep it compatible with most higan versions and the sd2snes
 
Cette version est compatible avec le pack de shaders disponible ici.
 

Télécharger bsnes-plus (x86) v073+3a (5.6 Mo)

Télécharger bsnes-plus (x64) v05 (7.8 Mo)

Site Officiel

En savoir plus…





https://getourbonus.com/fr/accueil

https://www.romspedia.com/