Ces fichiers ini concernant la partie arcade de MAME sont à mettre dans le répertoire « folders » de MAMEUI (ou clones). Il propose un tri des jeux par catégorie, année de sortie, version de MAME…

 

Télécharger MAMEUI Inifiles v0.169 r43208 (196,8 Ko)

Site Officiel

En savoir plus…

A l’instar de MAMEinfo pour MAME(Arcade), le fichier MESSinfo vous permet de suivre les changements entre les versions concernant les différents systèmes émulés par ce multi-émulateurs.

 

Télécharger MESSinfo v0.169 (8,5 Mo)

Site Officiel

En savoir plus…

Créé par Avery Lee (l’auteur de VirtualDub), il s’agit d’un émulateur d’Atari 8 bits (800/800XL/130XE) disponible en 32 et 64 bits. Il dispose de beaucoup d’options ainsi que d’une bonne compatibilité. Il prend en charge les jeux protégés conformément à l’émulation.

 

  • The built-in EXE loader now issues warnings to the debug console if it sees init segments exiting with the kernel ROM disabled or the I-flag set, since these will fail with vanilla DOS.
  • Fixed bug where mouse capture could drop if you moved the mouse fast enough. (The mouse was invisibly escaping the window.)
  • The 5200 placeholder cart is now re-mounted if you cancel the cartridge mapper dialog or if the cart load fails. Previously it would remove the cart and then the OS would boot up without a cart and crash (not possible on real console).
  • Rewrote motion calcs in input code. Relative bindings no longer run at different speeds between NTSC and PAL, and acceleration is now tunable independently from speed for digital-to-analog bindings, i.e. button to relative paddle. It’s now also possible to slow down relative bindings more than before. This changes the meaning of the speed values, so existing input maps may have to be adjusted — in particular, speed 0 is now actually 0. Note that acceleration only matters for D2A, not for analog-to-analog bindings like an analog stick -> paddle.
  • Redid the default input map presets. The mega mode switching transformer Xbox 360 input map that was confusing everyone is now gone and has been replaced with individual mappings. Also, relative-mode 5200 controller maps have been added. They’ve been tuned so that Missile Command is playable. Since this is a change to presets, you won’t see it unless you Reset all bindings or re-add the new ones through the Preset button.
  • Fixed UI bug where the names for the D-pad inputs on XInput controllers were off by one.
  • ST/Amiga mouse emulation rewritten, now dynamically changes pulse spacing as mouse speed varies. This makes the emulated mouse more reliable at higher speeds and removes the weird diamond movement artifacts caused by queuing.

 

Topic des versions Beta.

Télécharger Altirra v2.80 Test 8 (3,7 Mo)

Site Officiel

En savoir plus…

Il s’agit d’un ficher DAT regroupant plusieurs informations retraçant l’historique des avancées de l’émulation des jeux ainsi que des informations sur eux au sein de MAME (arcade/consoles/ordinateurs), il comporte également une section « tips and tricks ». En anglais.

 

Télécharger History.dat v1.69 (4,1 Mo)

Site Officiel

En savoir plus…

Un excellent émulateur Amstrad CPC.

 
Emulation
– Correct Z80 Flags emulation for IN and OUT and all derivatives.
– Added support for CRTC Type 1 register 6 border blanking when set to zero.
 
Debugger
– Changed breakpoint conditions to use 32 bit values rather than 16 bit values.
– Added a number of functions to breakpoint conditions to support 32 bit to 16/8 bit conversion.
– Added true and false variables.
 
Assembler
– Added ability to load symbols from the WinAPE command line using the /SYM:filename parameter.
– Option to automatically hide the output window on successful assemble.
 
Other
– Added documentation of command line parameters in help files.
– Added documentation of new breakpoint condition variables and functions.
– Updates ParaDOS 1.2 and ParaDOS 1.2+ ROM images to bug-fixed version which will work in slots below 7.
 
Known Issues
– The ASIC does not allow a number of registers to be read. This does not affect any current Plus software, and needs to be analysed fully before being emulated.
 
Demos Tested – Not Fully Working
– Power System Megademo (PWMD-A.DSK, PWMD-B.DSK, PWMD-C.DSK) – Last part before end reports CRTC Type 1 when Type 0 is used. – Screen jumps in Chany Part (Part 3)
– S&KOH Intro (Not on DSK) – HSYNC problem
– Soul Almighty (SOUL-ALM.DSK) – Digisampled jumper seems to jump too much (VSYNC?)

 

Télécharger WinAPE v2.0 beta 2 (4,2 Mo)

Site Officiel

En savoir plus…

Ce fichier 7z (contenant des fichiers XML) vous permettra de tricher dans vos jeux préférés. Il s’active via la touche TAB sous MAME (arcade/consoles/ordinateurs).

 

pugsy
 
Décompressez l’archive (.zip) de manière à obtenir un fichier cheat.7z (qui en revanche n’est pas à décompresser) et que vous placerez dans le répertoire courant de Mame puis modifier le fichier ini de l’émulateur (fichier qui se créait en lançant la ligne de commande mame.exe -cc) et changer la ligne: « cheat 0 » en « cheat 1 ».

 

Télécharger Pugsy Cheat v0.169 (1,4 Mo)

Site Officiel

En savoir plus…

Voici les derniers builds de Creamymami concernant MAME(Arcade).

 

– Caname c’est MAME(Arcade) ne supportant que les jeux CPS et Neo Geo.
– NMamex2 est un build de l’émulateur MAME(Arcade) sous Windows qui ne supporte que les jeux NeoGeo.
– Mame32k c’est MAME(Arcade) intégrant le module Kaillera (jeu en réseau).
– Mame32 More! est une version basée sur Mame Plus! mais compilée avec Kaillera.

 

Télécharger Caname v0.62.289 (2026/11/07) (2.4 Mo)

Télécharger NMamex2 v0.289 (2026/11/07) (1.7 Mo)

Télécharger Mame32K v0.67.289 (2026/11/07) (9.5 Mo)

Télécharger MAME32 More! v0.84.289 (2026/11/07) (12.2 Mo)

Site Officiel

En savoir plus…

Il s’agit de FBA Shuffle faite par Creamymami, contrairement aux versions de KOF2112, cette version est plus proche de la version officielle de FBA.

 

fba_shuffle_lang

 

Télécharger FBA Shuffle (x86) [Creamymami] v2.4.0 (2016/01/04) (4,6 Mo)

Télécharger FBA Shuffle (x64) [Creamymami] v2.4.0 (2026/11/07) (7.1 Mo)

Site Officiel

En savoir plus…

Créé par espes et basé sur QEMU, il s’agit d’un émulateur open source multi-plateformes expérimentale de console Microsoft X-Box et de sa déclinaison arcade Sega Chihiro.

 

xqemu-chihiro xqemu-xbox

 

Site de développement.

Télécharger XQEMU (2016/01/04) (8,3 Mo)

Site Officiel

En savoir plus…

Citra est le premier émulateur (et debugger) de Nintendo 3DS, écrit en C++ par Bunnei et proposé en open-source. Il commence à exécuter quelques jeux commerciaux (très expérimental). Cette version est dédiée aux systèmes 64bits. (Code source).

 

 
Plus d’infos sur le forum officiel.

Télécharger Citra (x64) (2016/01/07) (10,3 Mo)

Site Officiel

En savoir plus…

RPCS3 est un émulateur de Playstation 3 qui a pour objectif de devenir le plus complet possible. Il fait principalement office de désassembleur mais pousse la performance jusqu’à exécuter un certains nombres de jeux commerciaux devenant ainsi le premier émulateur de PS3 émulant un jeu du commerce, toutefois il nécessite un PC extrêmement performant.
 
rpcs3
 
En effet il vous faudra rien de moins qu’un CPU type core i7 @ 4Ghz, une carte graphique récente type nVidia GTX, de la mémoire haute performance type DDR4 ou encore un système d’exploitation comme Windows 10 x64 (pour l’utilisation des optimisations via DirectX 12) pour espérer lancer des jeux dans un mode relativement fluide (mais attention cela dépend énormément des builds et des jeux).
Cette version est optimisée pour les processeurs 64 bits.

 

 

Télécharger RPCS3 (x64) v0.0.0.6 (2016/01/07) (17,7 Mo)

Site Officiel

En savoir plus…

Play! est une tentative de créer un émulateur PlayStation 2 sous Windows. Il est actuellement écrit en C / C + + et utilise un système de mise en cache / de recompilation d’instruction pour obtenir de meilleures performances tout en émulant le CPU.

L’émulateur peut faire fonctionner quelques jeux, mais très moyennement dans la plupart des cas. L’objectif de l’auteur est d’atteindre un niveau de qualité qui permettra à quiconque de jouer son jeu favori PlayStation 2 sur son PC.

 

– Slightly changed the way video output of Snowblind games is handled to fix video issues with some games (ie.: Dragon Quest 8, Resident Evil 4).
– Interlaced output is now handled at presentation phase. This fixes issues with some games (ie.: Dark Cloud) but reduces the video quality of the games that use interlaced video. This is temporary till high resolution video output is implemented.
– Improved accuracy of some blending modes (ie.: Half Life’s light mapping).
– Minor compatibility fixes (ie.: Shadow of the Colossus now shows something, but still doesn’t go past loading screen).
– [Android] Fixed issue preventing games (ie.: Persona 4) from showing something on some Adreno 3xx devices.
– [Android] Downgraded target SDK to android-22 to prevent issues running on Android 6 (Permissions were not handled properly).
– [Android & iOS] AArch64 (ARM64) support. Gives up to 25% speed increase on devices supporting this architecture.
– Unified OpenGL rendering backend (same on desktop and mobile).
– Compatibility fixes (True Crime: LA now boots, still unplayable).
– [iOS] Fixed issues with 64-bits file stream offsets that were preventing some games from booting (Resident Evil 4, Persona 4 and maybe others).

 

Télécharger Play! (x86) GIT v0.77 (2026/10/25) (8.9 Mo)

Télécharger Play! (x64) GIT v0.77 (2026/10/25) (10.3 Mo)

Site Officiel

En savoir plus…





https://getourbonus.com/fr/accueil

https://www.romspedia.com/